Ingredients
-
Analysis not yet available for this ingredient.
-
Dimethicone is a silicone-based ingredient that forms a smooth, protective layer on your skin. It helps lock in moisture, creates a soft feel, and is commonly used in moisturizers and primers to improve product texture and skin hydration.
Benefits
- Improves skin hydration by creating a moisture-barrier layer
- Provides a smooth, silky feel to products and on skin
- Well-tolerated by sensitive and atopic (eczema-prone) skin
- Non-greasy alternative to heavier oils
Science: Clinical studies demonstrate dimethicone is safe and well-tolerated in children with atopic dermatitis from 12 months of age. Research shows moisturizers containing dimethicone effectively improve skin hydration in mild-to-moderate atopic dermatitis patients over 14 days.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Polyvinyl alcohol (PVA) is a synthetic polymer derived from polyvinyl acetate. In skincare, it's primarily used as a film-forming agent that creates a thin, breathable layer on the skin to improve product texture, adhesion, and delivery of active ingredients.
Benefits
- Creates a smooth, non-sticky finish on skin
- Improves product adhesion and wear time
- Supports controlled release of active skincare ingredients
- Biodegradable and generally well-tolerated by skin
Science: Research demonstrates PVA's effectiveness as a biocompatible polymer matrix for transdermal delivery systems and wound care applications. Its ability to dissolve rapidly on skin and form stable films makes it suitable for both therapeutic skincare delivery and cosmetic formulations, with no reported safety concerns in topical use.
Analyze Ingredient Further→ -
Polyisobutene is a synthetic polymer used as an emollient and skin-conditioning agent in moisturizers and creams. It forms a protective layer on the skin that helps lock in moisture and improve texture.
Benefits
- Reduces water loss from skin (by up to 33% in studies)
- Improves skin hydration and moisturization
- Enhances skin texture and smoothness
- Long-lasting moisturizing effect
- Pleasant, non-greasy feel on skin
Science: Clinical research shows hydrogenated polyisobutene significantly increases skin moisture content and reduces transepidermal water loss, with effects maintained for at least 6 hours. It performed 5-10% better than comparable emollient esters in moisturization studies, suggesting strong efficacy with minimal irritation potential.
Analyze Ingredient Further→ -
Diisostearyl Malate is an emollient and texture-enhancing ingredient derived from malic acid and isostearyl alcohol. It's used in cosmetics to create a smooth, silky feel and improve product spreadability on skin.
Benefits
- Creates a smooth, silky texture in formulations
- Helps improve product spreadability and application
- Provides emollient properties for skin conditioning
Potential concerns
- Potential for contact dermatitis in sensitive individuals, particularly linked to trace impurities (isostearyl alcohol) rather than the ingredient itself
- May cause lip irritation in lip care products in susceptible people
Science: A 1987 case study documented contact dermatitis from this ingredient in lipstick, though the reaction was traced to specific impurities (isostearyl alcohol) present in the material rather than the pure ingredient itself. Limited additional peer-reviewed safety data is available for this ingredient.
Analyze Ingredient Further→ -
Ethylhexylglycerin is a preservative and antimicrobial ingredient used to prevent bacterial growth and extend shelf life in skincare products. It's a multifunctional ingredient that helps keep formulations stable and free from contamination.
Benefits
- Prevents bacterial contamination in products
- Helps extend product shelf life
- Works synergistically with other preservatives for enhanced protection
Potential concerns
- May not be effective against all bacterial species (notably some Pseudomonas aeruginosa strains)
- Preservative-related sensitization possible in sensitive individuals, though uncommon
Science: Research shows ethylhexylglycerin has broad antimicrobial activity against many common cosmetic contaminants, though effectiveness varies by bacterial species. Studies demonstrate it can work synergistically with other preservative components to enhance biofilm inhibition.
Analyze Ingredient Further→ -
Phenyl Trimethicone is a silicone-based ingredient that creates a smooth, invisible coating on skin and hair. It's primarily used to enhance shine, improve texture, and create a polished appearance while providing a lightweight, non-greasy feel.
Benefits
- Enhances skin and hair shine and luster
- Smooths surface texture for a polished look
- Lightweight and non-greasy feel
- Long-lasting coverage that resists wear and moisture
Potential concerns
- May not be suitable for acne-prone skin if used in occlusive products, as silicones can trap bacteria and sebum
- Buildup possible with repeated use if not properly cleansed
- Not ideal for those seeking fully natural skincare
Science: Research confirms phenyl trimethicone effectively reduces hair surface irregularities and enhances visible shine, with instrumental measurements correlating well with consumer perception. Safety profile is generally favorable for cosmetic use, though long-term skin studies are limited.
Analyze Ingredient Further→ -
Titanium dioxide is a naturally occurring mineral that works as a physical UV filter and opacifying agent in skincare products. It sits on the skin's surface and reflects and scatters UV rays to provide broad-spectrum sun protection, and is also commonly used in foundations and powders to create coverage and a matte finish.
Benefits
- Provides broad-spectrum UVA and UVB protection
- Physical (non-chemical) sun filter suitable for sensitive skin
- Helps create opaque, matte finishes in makeup and tinted products
Potential concerns
- May leave a white cast on darker skin tones due to its opacity
- Can feel slightly heavy or occlusive on very oily skin types
- Rarely, inhalation of airborne powder particles may be a concern in occupational settings, though not in typical consumer use
Science: Titanium dioxide has a long history of safe use in cosmetics and is approved by the FDA, EU, and other major regulatory bodies as a sunscreen active ingredient. It is considered non-toxic and non-penetrating when applied topically in skincare products.
Analyze Ingredient Further→ -
Silica is a mineral powder derived from silicon dioxide that's commonly used in skincare and makeup products. It works primarily as a texture enhancer and absorbent, helping to mattify skin, improve product feel, and absorb excess oil.
Benefits
- Mattifies skin and reduces shine
- Improves product texture and spreadability
- Absorbs excess sebum and moisture
- Creates a smooth, refined appearance
Potential concerns
- When used as nanoparticles, potential for skin penetration remains under study
- Inhalation of silica powder (primarily occupational concern) has known health risks; topical use in cosmetics is considered lower risk
- Listed among potential carcinogenic substances in cosmetic formulations, though safe use levels and regulatory limits are established in the EU and US
Science: A 2023 review of European facial cosmetics identified silica among potential carcinogenic ingredients present in commercial products, though this reflects presence rather than proven harm at typical use concentrations. Research on silica nanoparticles suggests they are being developed for cosmetic use, but percutaneous penetration and long-term safety data remain limited. Regulatory agencies (EU, FDA) have established safe concentration limits for cosmetic use.
Analyze Ingredient Further→ -
2-Hexanediol is a humectant and preservative booster commonly used in skincare products to help retain moisture and extend shelf life. It works by drawing water into the skin while also enhancing the effectiveness of other preservatives, allowing brands to use lower amounts of traditional preservatives.
Benefits
- Hydrates and moisturizes skin by drawing in water
- Helps preserve products with lower preservative levels
- Works synergistically with other skincare ingredients like niacinamide
Potential concerns
- May cause cell viability concerns at concentrations above 1.0% in laboratory studies
- Limited real-world safety data in humans at typical skincare concentrations (usually 2-5%)
- Potential environmental concern if released into water systems
Science: While 2-hexanediol is widely used as a preservative substitute for parabens, recent cytotoxicity studies raise questions about safety at concentrations commonly found in skincare products (>2%). However, these findings are from laboratory cell studies and may not directly translate to human skin application. Further human safety studies are needed to confirm real-world risk.
Analyze Ingredient Further→ -
Hydrogenated polyisobutene is a lightweight oil derived from petroleum that works as an emollient (skin softener) and film-former in skincare products. It helps lock moisture into the skin and creates a smooth, non-greasy feel on application.
Benefits
- Improves skin hydration by reducing water loss from the skin surface
- Creates a smooth, pleasant skin texture with minimal greasiness
- Long-lasting moisturizing effect compared to some alternative emollients
- May provide subtle skin-tightening and smoothing effects when combined with certain polymers
Potential concerns
- Petroleum-derived ingredient; may not appeal to consumers seeking natural products
- Occlusive nature means it may feel heavy or cause buildup on very oily skin types
Science: Clinical studies demonstrate that hydrogenated polyisobutene effectively reduces transepidermal water loss (skin dehydration) by up to 33% and maintains this effect for several hours. When formulated with certain polymers, it contributes to measurable improvements in skin firmness and wrinkle appearance in aging skin.
Analyze Ingredient Further→ -
Palmitic acid is a naturally occurring fatty acid found in palm oil and animal fats that helps strengthen your skin's barrier and improve moisture retention. In skincare products, it acts as an emollient and emulsifier, making formulas smoother and helping other ingredients blend together.
Benefits
- Moisturizes and softens skin
- Strengthens skin barrier function
- Improves product texture and spreadability
Science: Palmitic acid is a well-established safe ingredient with a long history of use in cosmetics and food products. The provided research focuses on palmitic acid's metabolic role in systemic health contexts (cancer research), which is not relevant to topical skincare applications where absorption is minimal.
Analyze Ingredient Further→ -
Acrylates Copolymer is a synthetic polymer that acts as a film-former in skincare products, creating a thin, flexible layer on the skin's surface. It helps products adhere better and can improve the wear-time and finish of formulations.
Benefits
- Creates a smooth, adherent film on skin
- Improves product longevity and wear-time
- Enhances texture and finish of skincare formulations
Potential concerns
- May feel occlusive or slightly sticky on some skin types
- Potential for buildup with repeated layering
- Can cause irritation in individuals with very sensitive skin or acrylic sensitivities
Science: Limited peer-reviewed data available specifically for Acrylates Copolymer as used in skincare. Related polymer safety assessments by the Cosmetic Ingredient Review panel have generally found similar synthetic polymers safe at typical use concentrations, though individual polymer variants may have varying safety profiles.
Analyze Ingredient Further→ -
Bis-Diglyceryl Polyacyladipate-2 is a synthetic emollient and emulsifier used in skincare and lip care products to create a smooth texture and help blend water and oil-based ingredients together. It provides a soft, comfortable feel on the skin.
Benefits
- Creates smooth, blended textures in products
- Helps keep skin feeling soft and moisturized
- Improves product spreadability and application
Potential concerns
- May trigger allergic contact dermatitis in sensitive individuals
- Potential for cross-reactivity with other polyacyladipate compounds
Science: A 2021 case study in Contact Dermatitis documented allergic contact dermatitis linked to this ingredient in a lip balm formulation. While the ingredient is generally well-tolerated, consumers with sensitive skin or a history of cosmetic allergies should be cautious and perform patch testing.
Analyze Ingredient Further→ -
Tin Oxide is a mineral powder used in cosmetics primarily as a colorant and opacifying agent to create a smooth, matte finish in powders and foundations. It's an inert mineral that sits on top of the skin rather than being absorbed.
Benefits
- Provides opacity and coverage in powder formulations
- Creates a matte or satin finish
- Inert and unlikely to cause irritation in topical skincare use
Potential concerns
- Inhalation of powder particles should be avoided; inhaling tin oxide dust in industrial settings has been linked to lung concerns, though cosmetic powder use is a different exposure route
- No significant skin or eye irritation reported in normal cosmetic use
Science: The available research focuses on occupational inhalation hazards in industrial manufacturing rather than cosmetic use on skin. Tin oxide is poorly soluble and remains on the skin surface, making systemic absorption unlikely from topical application. Limited peer-reviewed data specifically addresses safety in finished skincare products.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Iron Oxides (CI 77491) is a naturally occurring mineral pigment used primarily as a colorant in cosmetics, particularly in foundations, powders, and tinted skincare products. It provides red and brown tones to makeup and doesn't serve a therapeutic skincare function—it's there to color the product.
Benefits
- Provides stable, long-lasting color
- Mineral-based alternative to synthetic dyes
- Generally well-tolerated by sensitive skin
Science: Iron Oxides are approved colorants in cosmetics by major regulatory bodies (FDA, EU) and have a long history of safe use. Limited peer-reviewed data exists specifically on topical iron oxide safety, but extensive regulatory review and decades of cosmetic use support its safety profile in this application.
Analyze Ingredient Further→ -
Iron Oxides (CI 77499) is a black pigment derived from iron compounds, commonly used in cosmetics to add color and provide a matte finish. It's a mineral-based colorant that sits on the skin's surface without penetrating deeply, making it a popular choice in foundations, powders, and eyeshadows.
Benefits
- Provides natural black pigmentation for even color coverage
- Creates a matte or natural finish without shine
- Mineral-based alternative to synthetic dyes
Potential concerns
- May cause irritation in people with sensitive skin or iron sensitivities (rare)
- Can potentially clog pores if used in heavy concentrations in acne-prone individuals
- Risk of staining if the product formula is unstable or applied heavily
Science: Iron Oxides are FDA-approved colorants for cosmetic use and have a long history of safe use in skincare and makeup products. Limited peer-reviewed data available specifically for this ingredient, though regulatory bodies have established it as safe for cosmetic applications at typical use levels.
Analyze Ingredient Further→ -
Synthetic fluorphlogopite is a mineral-derived ingredient made from magnesium silicate. It works as a bulking agent and thickener in cosmetic formulas, helping to create the right texture and consistency in products like foundations, powders, and creams.
Benefits
- Thickens and stabilizes product texture
- Improves spreadability and application
- Provides a smooth, even finish
Science: The Cosmetic Ingredient Review Expert Panel evaluated synthetic fluorphlogopite and concluded it is safe for use in cosmetics at typical concentrations. The ingredient has a well-established safety profile similar to other magnesium silicates used in skincare.
Analyze Ingredient Further→ -
Petrolatum, commonly known as petroleum jelly, is a mineral-based occlusive moisturizer derived from petroleum. It forms a protective barrier on the skin's surface to lock in moisture and prevent water loss, making it effective for dry and sensitive skin.
Benefits
- Creates a strong moisture barrier to prevent water loss from skin
- Helps heal and protect damaged or irritated skin
- Non-irritating and hypoallergenic for most people, including sensitive skin types
- Safe to use around eyes and on delicate areas
Potential concerns
- Has a thick, greasy texture that some people find uncomfortable
- May feel heavy on oily or acne-prone skin
- Does not actively hydrate skin—it seals in existing moisture rather than adding water
Science: Recent dermatological research confirms petrolatum is highly safe with an excellent safety profile. Common myths about it causing acne or flammability have been scientifically dispelled. It is widely used in clinical dermatology as a vehicle for medicated treatments and wound care, with virtually no allergenic or comedogenic concerns for typical use.
Analyze Ingredient Further→ -
Polyethylene is a synthetic plastic polymer used in skincare products as a thickening agent, emollient, and texture modifier. It creates a smooth, spreadable consistency and helps bind ingredients together in formulations.
Benefits
- Creates smooth, pleasant texture in creams and lotions
- Helps stabilize and thicken product formulations
- Provides a protective barrier on skin surface
Potential concerns
- Poor biodegradability — persists in the environment and may accumulate over time
- Not derived from renewable sources, contributing to plastic waste
- Microplastic concern if used in products that wash down drains
Science: Research indicates polyethylene shows poor environmental biodegradability and does not meet emerging sustainability criteria for topical skincare products. While safe for skin contact, dermatological literature increasingly recommends plant-based alternatives (such as plant waxes and biopolymers) to reduce environmental impact.
Analyze Ingredient Further→ -
Polymethylsilsesquioxane is a silica-based powder derived from silicon that acts as a lightweight filler and texture enhancer in skincare products. It helps absorb oils, create a smooth matte finish, and improve how products feel and spread on the skin.
Benefits
- Creates a smooth, velvety texture on skin
- Helps absorb excess oil and sebum
- Provides a matte finish without a heavy feel
- Improves product spreadability and blendability
Science: Recent research confirms polymethylsilsesquioxane is a hydrophobic silica polymer with high biocompatibility, synthesized using non-toxic methods. Its safety profile aligns with established silica filler use in cosmetics, though direct dermatological safety studies in skincare formulations are limited.
Analyze Ingredient Further→ -
Dimethicone Crosspolymer is a silicone-based ingredient that acts as a thickener and texture modifier in skincare products. It helps create a smooth, lightweight feel and can improve how products spread across the skin without leaving a greasy residue.
Benefits
- Creates a smooth, non-greasy texture
- Helps products glide evenly on skin
- Improves product stability and consistency
Science: Dimethicone crosspolymers are widely used in cosmetics and are generally recognized as safe by regulatory bodies including the CosIng database. Limited peer-reviewed data available specifically for this ingredient, but the safety profile is supported by extensive industry use and regulatory approval.
Analyze Ingredient Further→ -
Glyceryl Caprylate is a mild emulsifier and penetration enhancer derived from glycerin and caprylic acid (a natural fatty acid). In skincare products, it helps blend water and oil-based ingredients together and can improve how active ingredients absorb into the skin.
Benefits
- Helps formulations blend water and oil ingredients
- May enhance absorption of other skincare actives
- Mild and generally well-tolerated by most skin types
Science: Safety assessments by the Cosmetic Ingredient Review panel confirm glyceryl caprylate is safe for cosmetic use. Research demonstrates it functions effectively as a penetration enhancer in topical formulations, helping active ingredients reach deeper skin layers.
Analyze Ingredient Further→ -
Polyglyceryl-2 Triisostearate is an emulsifier derived from glycerin and stearic acid that helps blend oil and water-based ingredients together in skincare formulas. It creates a stable, smooth texture and is commonly used in creams, lotions, and serums to improve consistency and spreadability.
Benefits
- Helps stabilize oil and water mixtures for better product texture
- Improves how the product spreads and absorbs on skin
- Gentle, plant-derived alternative to synthetic emulsifiers
Science: Limited peer-reviewed data available for this specific ingredient. As a polyglyceryl ester emulsifier, it is generally recognized as safe by cosmetic regulatory bodies and is considered mild and well-tolerated in skincare formulations.
Analyze Ingredient Further→ -
Nylon-12 is a microplastic powder used in cosmetics as an absorbent and texture-enhancing agent. It helps products feel smooth, absorb excess oil, and improve spreadability on skin.
Benefits
- Absorbs excess sebum and oil
- Improves product texture and feel
- Provides a smooth, matte finish
Potential concerns
- Microplastic ingredient with potential environmental persistence
- May contribute to microplastic pollution in aquatic ecosystems when washed down the drain
- Electrostatic adhesion to skin could theoretically trap bacteria or disrupt skin microbiome (limited evidence in humans)
Science: Research shows nylon polymers are microplastics that can adhere to aquatic microorganisms and disrupt their function. While direct human skin safety data is limited, growing concern about microplastic accumulation in the environment and potential bioaccumulation warrants caution. Regulatory bodies in some regions are restricting microplastics in rinse-off cosmetics.
Analyze Ingredient Further→ -
This is a silicone-based conditioning agent that creates a smooth, silky feel on the skin. It helps products glide on easily and leaves skin feeling soft without a greasy residue.
Benefits
- Improves product texture and spreadability
- Creates a smooth, silky skin feel
- Provides light conditioning without heaviness
Science: Limited peer-reviewed data available for this ingredient. As a high-molecular-weight silicone polymer, it is generally recognized as safe in cosmetics and is non-irritating to skin at typical use levels.
Analyze Ingredient Further→ -
Talc is a naturally occurring mineral powder used in cosmetics primarily as an absorbent and anti-caking agent. It helps reduce shine, absorb moisture, and improve the texture and spreadability of powdered products like foundations, blushes, and body powders.
Benefits
- Absorbs excess oil and moisture on skin
- Improves product texture and application
- Reduces shine and mattifies skin
Potential concerns
- Cosmetic talc has been associated with asbestos contamination in some cases; prolonged inhalation exposure may pose health risks, particularly for regular heavy users
- May cause respiratory irritation if inhaled as powder
- Talc particles can accumulate in lungs with chronic exposure
Science: Research indicates that cosmetic talc can contain asbestos contamination, and prolonged cumulative exposure has been linked to mesothelioma, particularly in individuals with heavy or prolonged use. A 2024 systematic review examined 77 epidemiological studies on talc and cancer risk across multiple exposure types and cancer sites, though methodological limitations exist in much of the literature. Modern cosmetic talc in regulated markets is typically talc-only without intentional asbestos, but historical contamination and inhalation exposure remain documented concerns.
Analyze Ingredient Further→ -
Isostearyl Neopentanoate is a lightweight synthetic oil that acts as an emollient and texture enhancer in skincare products. It helps soften the skin and improves how products glide on and feel, while also helping formulations stay stable and preventing them from becoming greasy.
Benefits
- Lightweight moisturization
- Smooth, non-greasy feel
- Improves product spreadability
- Enhances formula stability
Science: Limited peer-reviewed data available for this ingredient. It is derived from isostearyl alcohol and neopentanoic acid, chemically similar to other ester oils widely used in cosmetics with established safety profiles.
Analyze Ingredient Further→ -
Octyldodecyl Stearoyl Stearate is a synthetic ester derived from stearic acid that works as an emollient and thickening agent. It helps create a smooth texture in formulations and conditions the skin by forming a protective layer on the surface.
Benefits
- Smooths and softens skin texture
- Improves product consistency and spreadability
- Creates a lightweight conditioning layer without significant penetration
Potential concerns
- May cause mild irritation in sensitive individuals or at high concentrations (7.5–20% range)
- Can cause mild ocular (eye) irritation if direct contact occurs
- Very limited data available; safety conclusions rely partly on related ingredient profiles
Science: Safety panel review found that 95% of applied Octyldodecyl Stearoyl Stearate remains on the skin surface with minimal penetration, reducing systemic exposure concerns. Clinical testing at typical use concentrations (2–15%) showed non- to mild irritation and no sensitization or mutagenic effects.
Analyze Ingredient Further→ -
Calcium Aluminum Borosilicate is a mineral powder used in cosmetics as a bulking agent and texture enhancer. It helps create a smooth, silky feel in powders and helps products spread evenly on skin.
Benefits
- Creates a smooth, silky texture in powders
- Helps absorb excess oil and moisture
- Provides light-diffusing properties for a soft-focus effect
Potential concerns
- May cause irritation in those with sensitive skin or mineral sensitivities
- Inhalation of fine powder particles should be avoided
Science: Limited peer-reviewed data available for this ingredient. It is considered a cosmetically acceptable mineral filler with a long history of safe use in makeup and powder formulations.
Analyze Ingredient Further→ -
This is a complex emollient and conditioning agent made from plant-derived and synthetic fatty acids. It works by smoothing the skin's surface and helping skincare products blend together while creating a soft, moisturized feel.
Benefits
- Softens and smooths skin texture
- Improves product spreadability and feel
- Provides lightweight moisture without heaviness
Science: Limited peer-reviewed data available for this specific ingredient. It is formulated as a non-irritant emollient based on its chemical structure (long-chain fatty acid esters), with a safety profile consistent with similar conditioning agents used in cosmetics.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Red 7 Lake (CI 15850) is a synthetic colorant approved for cosmetic use that adds red or pink color to skincare products. It's a 'lake' form, meaning the dye is bound to an insoluble substrate, making it more stable in formulations. It serves purely aesthetic purposes and has no active skincare benefits.
Potential concerns
- May cause allergic reactions or contact sensitivity in individuals with dye sensitivities
- Can stain skin or fabrics temporarily
Science: Red 7 Lake is approved by regulatory bodies including the FDA and EU for cosmetic use with established safety limits. Limited peer-reviewed data is available on this specific colorant in skincare applications; safety relies primarily on regulatory approval and historical use data.
Analyze Ingredient Further→ -
Methyl methacrylate crosspolymer is a synthetic polymer used primarily as a thickening and film-forming agent in skincare formulations. It helps create texture and consistency in products while potentially supporting preservative effectiveness.
Benefits
- Improves product texture and spreadability
- Creates a light film on skin
- May enhance preservative performance, allowing lower preservative levels in formulations
Potential concerns
- Limited safety data specific to skin application in published literature
- Synthetic polymer — may cause sensitivity in those with polymer sensitivities, though this is rare
Science: Research shows that methyl methacrylate crosspolymer at high concentrations (50,000 ppm) can reduce the effectiveness of common preservatives like 1,2-hexanediol against bacteria and fungi, suggesting it may interfere with preservative function rather than support it. Limited peer-reviewed data exists on direct skin safety and efficacy at typical use levels.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Hydrogenated Poly(C6-14 Olefin) is a synthetic oil derived from petroleum that's been chemically modified to make it stable and smooth. It's used in skincare products as an emollient and texture enhancer to soften skin and improve how the product feels and spreads.
Benefits
- Creates a smooth, silky feel on skin
- Provides gentle moisturization and softening
- Improves product spreadability and texture
Potential concerns
- May leave a heavy or occlusive layer on skin, potentially problematic for acne-prone or very oily skin types
- Synthetic ingredient—some consumers prefer plant-derived alternatives
Science: Limited peer-reviewed data available for this ingredient. It is approved for cosmetic use by major regulatory bodies (including the FDA and EU) and is considered safe at typical use concentrations, with a low likelihood of skin sensitization or irritation.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients