Ingredients
-
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Caprylyl glycol is a preservative and skin-conditioning ingredient derived from coconut oil. It helps prevent bacterial and mold growth in skincare products while also providing mild hydrating and humectant benefits to the skin.
Benefits
- Helps preserve product freshness and prevent contamination
- Provides gentle humectant properties to help retain skin moisture
- Often used as a gentler alternative to traditional preservatives
Potential concerns
- Rare cases of allergic contact dermatitis have been reported in sensitive individuals
- May cause irritation in those with known sensitivity to glycols
Science: A 200-subject repeat patch test study found no delayed hypersensitivity reactions to caprylyl glycol at typical use concentrations. However, isolated case reports of allergic contact dermatitis exist, suggesting it can act as an allergen in susceptible individuals. It is widely used in infant and sensitive-skin formulations as a preservative alternative.
Analyze Ingredient Further→ -
Potassium sorbate is a preservative used in skincare products to prevent the growth of mold, yeast, and some bacteria, helping extend shelf life. It's a salt derived from sorbic acid and is commonly used as a gentler alternative to stronger chemical preservatives.
Benefits
- Prevents microbial contamination and mold growth
- Generally considered milder than some other preservatives like benzalkonium chloride
- Allows products to remain effective longer without refrigeration
Potential concerns
- May cause irritation or allergic contact dermatitis in sensitive individuals
- Not suitable for preservative-free formulations
- Limited effectiveness against some bacteria compared to stronger preservatives
Science: Clinical research suggests potassium sorbate is less damaging to delicate tissues than benzalkonium chloride, making it a preferred alternative preservative in sensitive applications like eye products. However, peer-reviewed safety data specific to topical skincare use in the general population is limited.
Analyze Ingredient Further→ -
Sodium benzoate is a preservative used in skincare products to prevent bacterial and fungal growth, extending shelf life. It's a salt derived from benzoic acid and is one of the most widely used preservatives in cosmetics, skincare, and food products.
Benefits
- Prevents microbial contamination and extends product shelf life
- Generally effective at low concentrations (0.1-0.5%)
- Approved for cosmetic use by major regulatory bodies
Potential concerns
- Can cause allergic contact dermatitis in sensitive individuals; identified as an allergen in medical hand cleansers
- Recent research suggests long-term oral intake may affect bone health and increase osteoporosis risk, though topical skincare exposure is minimal
Science: Sodium benzoate is well-established as a safe preservative in cosmetics at typical use levels. However, emerging research indicates that chronic systemic intake may interfere with bone metabolism through the FGF2/p38/RUNX2 pathway. For topical skincare use, the exposure and absorption are minimal compared to dietary intake, but individuals with known sensitivities should avoid it.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Propanediol is a lightweight humectant—a molecule that draws water into the skin to keep it hydrated. It's also used in cosmetic formulations as a solvent and preservative booster, helping products stay stable and feel smooth on the skin.
Benefits
- Hydrates and moisturizes the skin
- Improves product texture and spreadability
- Helps preserve formulations naturally
Science: Propanediol can be produced through bio-based fermentation (from glycerol using microorganisms), making it an environmentally friendly alternative to traditional chemical synthesis. It is widely recognized as safe in cosmetic and food applications, with established use as both a humectant and preservative enhancer.
Analyze Ingredient Further→ -
Tocopherol is a form of vitamin E, a fat-soluble antioxidant that protects skin from damage caused by free radicals and oxidative stress. It helps maintain skin's natural barrier function and is commonly used in skincare products to prevent premature aging and support overall skin health.
Benefits
- Protects skin from free radical damage and oxidative stress
- Supports skin barrier function and moisture retention
- May help reduce signs of aging caused by UV exposure and environmental damage
- Works as a lipid antioxidant to prevent degradation of skin oils
Science: Tocopherol (α-tocopherol) is recognized in peer-reviewed research as a key endogenous defense mechanism against oxidative stress in aging skin, particularly from UV-induced damage. Studies confirm it functions as a lipid-soluble antioxidant capable of preventing lipid peroxidation, with established efficacy in cosmetic and therapeutic applications.
Analyze Ingredient Further→ -
Dipropylene glycol is a lightweight humectant and solvent derived from propylene glycol that helps skincare products absorb into skin while drawing moisture to the surface. It's commonly used in serums, toners, and lightweight moisturizers to improve texture and hydration.
Benefits
- Humectant that draws moisture into the skin
- Lightweight feel that doesn't leave greasy residue
- Enhances absorption of other active ingredients
- Helps preserve product stability
Potential concerns
- Rare potential for allergic contact dermatitis in sensitive individuals (documented in medical device contexts)
- May cause irritation or sensitization in people with compromised skin barriers
- Unlikely concern in typical skincare concentrations, but those with known propylene glycol sensitivity should avoid
Science: Dipropylene glycol diacrylate (a related compound) has been identified as an allergen in medical devices in patch testing studies, though the base dipropylene glycol ingredient itself has limited published dermatology data. Allergic reactions appear rare and primarily documented in specialized medical contexts rather than cosmetic skincare use.
Analyze Ingredient Further→ -
Coco-Caprylate is a lightweight, fast-absorbing oil derived from coconut that acts as an emollient and texture enhancer in skincare products. It helps soften and condition the skin while improving the spreadability and feel of formulations.
Benefits
- Lightweight moisturizing without a greasy residue
- Improves product texture and skin feel
- Helps dissolve and stabilize UV filters in sunscreens
Science: Research shows Coco-Caprylate performs comparably to other standard cosmetic emollients in sunscreen formulations. While it has moderate polarity, it was slightly less optimal than Dibutyl Adipate for maximizing UVA protection in sunscreens, though it does not negatively impact SPF performance.
Analyze Ingredient Further→ -
Sodium Hydroxide is a strong alkaline chemical used in skincare products primarily as a pH buffer to neutralize acids and adjust the product's pH to safe levels for skin. It is not an active skincare ingredient and appears only in trace amounts in finished products.
Potential concerns
- In concentrated form, sodium hydroxide is caustic and can cause severe chemical burns; however, in cosmetic products it is diluted and pH-buffered to safe levels
- Undiluted or highly concentrated sodium hydroxide should never contact skin directly
Science: The provided research discusses sodium hydroxide only in a specialized medical context (10% solution for surgical cauterization of ingrown toenails), which is not relevant to cosmetic skincare use. In properly formulated skincare products, sodium hydroxide is used in minimal concentrations solely for pH adjustment and is considered safe by regulatory bodies including the FDA and EU.
Analyze Ingredient Further→ -
T-Butyl Alcohol is a colorless liquid solvent used in cosmetics to help dissolve other ingredients, carry fragrance, and denature alcohol. It appears in small amounts in eye makeup, fragrances, and shaving products.
Benefits
- Helps dissolve and mix other skincare ingredients
- Carries fragrance effectively
- Allows for lightweight product formulations
Potential concerns
- Can cause moderate to severe eye irritation at high concentrations
- May cause mild to moderate skin irritation in sensitive individuals
- Emits volatile organic compounds (VOCs) that can affect indoor air quality
- Animal studies show potential kidney and liver effects at high exposure levels (not relevant at cosmetic-use concentrations)
Science: A 2005 safety assessment by the Cosmetic Ingredient Review panel concluded t-Butyl Alcohol is safe as used in cosmetics (typically 0.00001–0.3%), noting that concerning effects observed in animal studies occurred at doses far exceeding typical exposure. The ingredient is not mutagenic and poses minimal carcinogenic risk at cosmetic concentrations, though it can cause eye and skin irritation at high purity levels.
Analyze Ingredient Further→ -
Carbomer is a thickening agent and stabilizer that gives skincare products their gel-like texture. It helps create a smooth, spreadable consistency and can hold active ingredients in place on the skin for better absorption.
Benefits
- Creates a smooth, easy-to-apply gel texture
- Helps stabilize and thicken formulations
- Can improve how long active ingredients stay on the skin
- Allows better delivery of beneficial compounds into deeper skin layers
Potential concerns
- Can occasionally cause irritation or sensitivity in very reactive skin types
- Requires proper pH adjustment in formulations (formulators use this, not consumers)
Science: Research shows carbomer is commonly used as a gel base in advanced skincare delivery systems, including those designed for anti-inflammatory and healing treatments. Studies indicate it effectively works with active ingredients like nanoparticles and botanical extracts to improve their penetration and efficacy on skin.
Analyze Ingredient Further→ -
Water is the primary ingredient in most skincare products, serving as a base that dissolves and carries other active ingredients. It hydrates the skin surface and helps other beneficial compounds penetrate effectively.
Benefits
- Hydrates and plumps the skin
- Helps deliver other skincare ingredients
- Essential solvent for product formulation
Science: Water is a fundamental component of skin physiology and cosmetic formulations. No safety concerns exist for topical application; it is non-irritating and universally safe for all skin types.
Analyze Ingredient Further→ -
Cellulose is a natural plant-derived polymer that acts as a thickener and structural support in skincare formulas. In skincare products like masks and serums, it forms a porous matrix that helps hold water and active ingredients on the skin, improving hydration and product delivery.
Benefits
- Increases skin hydration and moisture retention
- Improves product adhesion and allows for better delivery of active ingredients
- Biocompatible and well-tolerated by skin
- Supports the formation of masks and gel-like textures
Science: Research shows bacterial cellulose membranes significantly improve skin moisture, with one study demonstrating a 76% increase in hydration in most volunteers. Cellulose's highly porous nanostructure allows rapid incorporation and release of cosmetic actives, making it an effective support material for skincare applications.
Analyze Ingredient Further→ -
C13-15 Alkane is a lightweight, colorless oil derived from petroleum that acts as an emollient and texture enhancer in skincare products. It helps soften and smooth the skin while giving products a silky, non-greasy feel.
Benefits
- Lightweight moisturizing without heavy residue
- Improves product spreadability and smooth application
- Creates a silky skin feel
Science: Limited peer-reviewed data available for this ingredient. It is generally recognized as safe by regulatory bodies (including the FDA) for use in cosmetics and is non-irritating for most skin types.
Analyze Ingredient Further→ -
Sodium metabisulfite is a preservative and antioxidant used in skincare to prevent product spoilage and oxidation. It helps extend shelf life by protecting formulations from degradation caused by air and light exposure.
Benefits
- Preserves product stability and extends shelf life
- Prevents oxidation of other ingredients
- Approved for cosmetic use at standard concentrations
Potential concerns
- May cause irritation or allergic reactions in sensitive individuals, particularly those with sulfite sensitivities
- Can trigger reactions in people with asthma or sulfite allergies
- Not typically recommended for products applied to sensitive facial skin
Science: The Cosmetic Ingredient Review Expert Panel confirmed sodium metabisulfite is safe in cosmetic formulations at typical use concentrations (2023). However, research indicates it can affect cellular ion channels at higher concentrations; safety depends on the low levels used in skincare products.
Analyze Ingredient Further→ -
PVM/MA copolymer is a film-forming polymer derived from vinyl methyl ether and maleic acid. In skincare, it works as a binder and adhesive that helps product ingredients stick to the skin and form a protective layer.
Benefits
- Creates a protective barrier on skin surface
- Helps other active ingredients adhere better to skin
- May provide mild occlusive benefits to reduce moisture loss
Science: Research on PVM/MA copolymer primarily comes from dental care studies, where it demonstrates strong adhesive properties and protective effects. While direct skincare efficacy data is limited, its safety profile and adhesive mechanism suggest compatibility with topical use.
Analyze Ingredient Further→ -
Sorbitan Oleate is an emulsifier derived from sorbitol (a natural sugar alcohol) and oleic acid (a fatty acid). It helps mix oil and water-based ingredients together in skincare formulations, creating a smooth, stable texture.
Benefits
- Stabilizes oil-and-water mixtures in creams and lotions
- Improves product texture and spreadability
- Allows better absorption of other skincare actives
Potential concerns
- Mild skin irritant in some individuals; generally minimal irritation in testing
- Rare allergic contact reactions reported (<1% in sensitive populations)
- May reduce skin's DNA repair capacity when exposed to UV radiation (in lab studies)
Science: The Cosmetic Ingredient Review Expert Panel concluded Sorbitan Oleate is safe for cosmetic use at concentrations typically below 10%. While generally well-tolerated with minimal irritation in clinical tests, one in vitro study noted it may interfere with UV-induced DNA repair in human cells—a concern primarily relevant when combined with sun exposure rather than the ingredient alone.
Analyze Ingredient Further→ -
Polyacrylate Crosspolymer-6 is a synthetic polymer used as a thickener and stabilizer in skincare formulas. It helps create a smooth, gel-like texture and keeps product ingredients evenly distributed without separating.
Benefits
- Creates smooth, spreadable texture
- Stabilizes formulas and prevents separation
- Helps products feel lightweight on skin
Science: Limited peer-reviewed data available for this ingredient. As a synthetic polymer, it is generally recognized as safe for topical use and is not absorbed through the skin due to its large molecular size. It is approved for cosmetic use in major regulatory regions.
Analyze Ingredient Further→ -
Glyceryl Polyacrylate is a synthetic emulsifier and skin-conditioning agent that helps bind water and oil together in skincare formulas, creating a smooth texture. It's used at low concentrations (typically under 12%) to improve how products feel and spread on skin.
Benefits
- Helps emulsify and stabilize skincare formulations
- Provides skin-conditioning and smoothing effects
- Improves product texture and spreadability
Potential concerns
- Undiluted forms may cause minor skin irritation, particularly on damaged skin
- Very limited individual safety data available compared to other glyceryl monoesters
Science: Glyceryl Polyacrylate was included in a comprehensive 2004 safety assessment of glyceryl monoesters by the Cosmetic Ingredient Review panel. The ingredient class shows little acute toxicity and is not a skin sensitizer at cosmetic use concentrations; however, specific toxicological data for Glyceryl Polyacrylate as an individual ingredient is limited in published literature.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
C9-12 Alkane is a lightweight, odorless hydrocarbon oil derived from petroleum or synthesized for use in skincare. It acts as an emollient and occlusive, helping to soften skin and seal in moisture without leaving a heavy residue.
Benefits
- Lightweight moisturizing
- Non-greasy feel
- Helps lock in hydration
Science: Limited peer-reviewed data available for this ingredient. It is generally recognized as safe by regulatory bodies (including the EU and FDA) for use in cosmetics and has a long history of use in personal care formulations with no significant adverse effects documented.
Analyze Ingredient Further→ -
Triheptanoin is a specialized oil derived from medium-chain fatty acids that is primarily used as a therapeutic dietary supplement for rare metabolic disorders. In skincare, it functions as an emollient and skin-conditioning agent that helps soften and hydrate the skin barrier.
Benefits
- Provides emollient properties to soften and smooth skin
- Helps support skin hydration and barrier function
- Light texture compared to heavier oils
Potential concerns
- Not intended for internal consumption in cosmetic products — therapeutic use requires medical supervision
- May cause sensitivity in individuals with fatty acid metabolism disorders
Science: Triheptanoin is clinically established as a therapeutic agent for carnitine-acylcarnitine translocase (CACT) deficiency, where it provides essential calories through a specialized metabolic pathway. Limited peer-reviewed data exists on its use as a cosmetic skincare ingredient; safety and efficacy in topical formulations would require additional consumer-focused research.
Analyze Ingredient Further→ -
This is a synthetic polymer created by combining dilinoleic acid (a fatty acid derived from linoleic acid) with butanediol. It functions as a film-former and emollient in skincare products, helping to smooth the skin surface and improve product texture while providing mild moisturizing properties.
Benefits
- Creates a smooth, even texture on skin
- Provides lightweight moisturization
- Helps products glide smoothly during application
Science: Limited peer-reviewed data available for this ingredient. As a synthetic polymer, it is generally considered safe for topical use in cosmetics, though specific safety studies on this particular copolymer combination are not widely published in accessible literature.
Analyze Ingredient Further→ -
Retinal is a form of vitamin A that works as a precursor to retinoic acid, the active compound that drives skin renewal. It helps regulate skin cell turnover, support collagen health, and influence pigmentation processes in the skin.
Benefits
- Promotes skin cell turnover and renewal
- May help with signs of aging and skin texture
- Supports skin's natural repair processes
- Influences melanin regulation and skin tone
Potential concerns
- Can cause irritation, redness, and dryness when first introduced
- May increase sun sensitivity—daily SPF is essential
- Not recommended during pregnancy due to vitamin A concerns
- Can be destabilizing in formulations; may degrade when exposed to light or air
Science: Research confirms retinal is a key metabolite of vitamin A that regulates skin cell function and influences melanogenesis, though the exact mechanisms in topical skincare require further study. Both insufficient and excessive vitamin A can cause problems, so appropriate dosing and gradual introduction are important.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
This is a synthetic polymer made by chemically combining castor oil with IPDI (isophorone diisocyanate). It functions as a film-former and texture enhancer in skincare products, helping to create a smooth, even application and improve how products feel and spread on the skin.
Benefits
- Creates a smooth, even texture in formulations
- Helps products spread more easily across skin
- Provides film-forming properties for product adherence
Potential concerns
- Limited safety data available for this specific polymer
- Potential irritation in sensitive individuals (as with most synthetic polymers)
- IPDI is a reactive chemical; residual unreacted material could theoretically cause sensitivity, though this is unlikely in properly formulated products
Science: Limited peer-reviewed data available for this ingredient. Safety relies on manufacturer compliance with cosmetic regulations and proper synthesis to minimize unreacted isocyanate residues. General polymer safety in cosmetics is well-established, but this specific copolymer lacks independent published studies.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients