👎 0
Ingredients
-
Analysis not yet available for this ingredient.
-
Hexylene glycol is a lightweight humectant and preservative booster used in skincare products to help retain moisture and improve product stability. It also enhances the penetration of other active ingredients into the skin.
Benefits
- Helps skin retain moisture
- Improves product texture and spreadability
- Enhances effectiveness of preservative systems
Potential concerns
- May cause mild irritation or redness in sensitive individuals (occurs in roughly 3% of eczema-prone skin)
- Potential for delayed allergic contact reactions in susceptible people, though this is uncommon
- Less irritating than propylene glycol under occlusion, but still worth avoiding if you have known sensitivities to glycols
Science: A 1989 study found hexylene glycol caused visible skin reactions in 2.8% of eczema patients at high concentrations (30-50%), with potential for delayed allergic sensitization in rare cases. It was less irritating than propylene glycol. One case report mentions hexylene glycol as a potential allergen in medical formulations, though reactions are uncommon at typical cosmetic concentrations.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Sodium Hydroxide is a strong alkaline chemical used in skincare products primarily as a pH buffer to neutralize acids and adjust the product's pH to safe levels for skin. It is not an active skincare ingredient and appears only in trace amounts in finished products.
Potential concerns
- In concentrated form, sodium hydroxide is caustic and can cause severe chemical burns; however, in cosmetic products it is diluted and pH-buffered to safe levels
- Undiluted or highly concentrated sodium hydroxide should never contact skin directly
Science: The provided research discusses sodium hydroxide only in a specialized medical context (10% solution for surgical cauterization of ingrown toenails), which is not relevant to cosmetic skincare use. In properly formulated skincare products, sodium hydroxide is used in minimal concentrations solely for pH adjustment and is considered safe by regulatory bodies including the FDA and EU.
Analyze Ingredient Further→ -
Carbomer is a thickening agent and stabilizer that gives skincare products their gel-like texture. It helps create a smooth, spreadable consistency and can hold active ingredients in place on the skin for better absorption.
Benefits
- Creates a smooth, easy-to-apply gel texture
- Helps stabilize and thicken formulations
- Can improve how long active ingredients stay on the skin
- Allows better delivery of beneficial compounds into deeper skin layers
Potential concerns
- Can occasionally cause irritation or sensitivity in very reactive skin types
- Requires proper pH adjustment in formulations (formulators use this, not consumers)
Science: Research shows carbomer is commonly used as a gel base in advanced skincare delivery systems, including those designed for anti-inflammatory and healing treatments. Studies indicate it effectively works with active ingredients like nanoparticles and botanical extracts to improve their penetration and efficacy on skin.
Analyze Ingredient Further→ -
Pentaerythrityl Tetraethylhexanoate is a synthetic emollient and texture enhancer used in skincare products. It helps create a smooth, lightweight feel on the skin while improving product spreadability and providing mild moisturizing properties.
Benefits
- Creates a smooth, non-greasy texture
- Improves product spreadability and application
- Provides light emollient properties
Science: Limited peer-reviewed data available for this ingredient. It is a synthetic ester commonly used as a cosmetic texture agent and is generally recognized as safe for topical use based on its chemical structure and historical use in cosmetic formulations.
Analyze Ingredient Further→ -
Fragrance (Parfum) is a concentrated blend of aromatic compounds—including essential oils, aroma chemicals, and natural extracts—added to skincare products to provide a pleasant scent. It serves no active skincare benefit and is purely for sensory appeal.
Benefits
- Enhances the sensory experience of using the product
- Can make the skincare routine feel more luxurious or enjoyable
Potential concerns
- May cause irritation or allergic contact dermatitis, especially in sensitive skin
- Can trigger headaches or respiratory sensitivity in some people
- Fragrance compounds may be comedogenic (pore-clogging) in acne-prone skin
- Some fragrance components degrade over time and can become irritating
Science: Fragrance is a common cause of contact dermatitis and allergic reactions in skincare. The specific composition of 'Fragrance' blends is proprietary and undisclosed, making it difficult to identify which compounds may trigger individual sensitivities. People with sensitive or reactive skin often benefit from fragrance-free alternatives.
Analyze Ingredient Further→ -
Cyclopentasiloxane is a lightweight silicone fluid commonly used in skincare products as an emollient and slip agent. It helps products glide smoothly onto skin and creates a soft, silky feel without leaving a greasy residue.
Benefits
- Smooth application and comfortable feel
- Lightweight moisturizing layer
- Helps other ingredients spread evenly across skin
Potential concerns
- May not be suitable for acne-prone skin as it can be occlusive
- Some people prefer to avoid silicones due to environmental concerns
- Can accumulate on skin if not properly cleansed
Science: Limited peer-reviewed data available for this ingredient in skincare efficacy studies. Cyclopentasiloxane is widely used in cosmetics and considered safe by regulatory bodies, though some environmental persistence concerns have been noted in chemical literature.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Cyclohexasiloxane is a silicone-derived conditioning agent that creates a smooth, lightweight feel on skin and hair. It helps products glide smoothly and can improve the texture and appearance of formulations without leaving a heavy residue.
Benefits
- Smooths and conditions skin and hair
- Creates a lightweight, non-greasy feel
- Improves product spreadability and texture
Potential concerns
- Minimal absorption through skin, but potential bioaccumulation concerns remain under investigation—regulatory agencies continue to evaluate whether this ingredient meets persistence and bioaccumulation criteria
- Not recommended for users concerned about persistent chemicals in the environment
Science: Multiple toxicity studies show no skin irritation, sensitization, or genotoxicity concerns at typical cosmetic concentrations. However, recent 2024 research flags that cyclohexasiloxane (D6) may have bioaccumulation potential similar to its predecessors D4 and D5, which were restricted due to PBT/vPvB classification; regulatory review is ongoing and recommendations may change.
Analyze Ingredient Further→ -
Isononyl isononanoate is a lightweight synthetic oil derived from fatty acids, used in skincare products as an emollient to soften and smooth skin. It provides a silky texture without a greasy feel, making it popular in moisturizers, serums, and foundations.
Benefits
- Softens and conditions skin
- Provides lightweight moisture without heaviness
- Improves product texture and spreadability
Science: Research shows isononyl isononanoate has a very clean chemical profile with minimal volatile compounds—mainly just the ester itself and traces of isononyl alcohol from synthesis. It is well-tolerated in cosmetic formulations and considered safe for topical use.
Analyze Ingredient Further→ -
Cetyl ethylhexanoate is a lightweight oil derived from natural sources that functions as a skin-conditioning agent and emollient in skincare formulations. It helps soften and smooth the skin while also serving as a functional component that stabilizes emulsions and improves product texture.
Benefits
- Softens and conditions skin
- Improves product texture and spreadability
- Helps stabilize emulsions for better product performance
- Lightweight feel without heaviness
Potential concerns
- When formulated incorrectly, products containing this ingredient may cause irritation; formulations should be tested to ensure non-irritating concentrations
- Generally safe at typical use levels (up to 52% in leave-on products like lipsticks, and 77.3% in rinse-off formulations)
Science: The Cosmetic Ingredient Review Expert Panel concluded this ingredient is safe in cosmetic formulations at current use levels when properly formulated to be non-irritating. Recent research (2024) demonstrates its role in advanced emulsion technology, where it helps create stable, thickened skincare products with enhanced cleansing and usability properties.
Analyze Ingredient Further→ -
Sucrose Cocoate is a natural emulsifier derived from coconut oil and sugar that helps mix oil and water-based ingredients together in skincare formulas. It's commonly used in moisturizing products to create stable, creamy textures while supporting skin hydration.
Benefits
- Helps stabilize emulsions for better product texture and consistency
- Supports skin hydration and moisture retention
- May help strengthen the skin's natural barrier function
- Derived from natural sources (coconut and sugar)
Science: Research shows sucrose cocoate creates physically stable emulsions with favorable effects on skin hydration and barrier improvement. Studies indicate it's well-tolerated in topical formulations at typical use levels (around 0.5% or less).
Analyze Ingredient Further→ -
Benzoic acid is a naturally occurring preservative commonly used in skincare products to prevent bacterial and fungal growth, extending shelf life. It's a weak organic acid found in many plants and is also produced synthetically for cosmetic use.
Benefits
- Antimicrobial preservative that prevents bacterial and fungal contamination
- Helps extend product shelf life and maintain stability
- Naturally occurring compound also found in some foods
Potential concerns
- May cause skin irritation or sensitivity in some individuals, particularly on sensitive or compromised skin
- Can be a contact allergen for people with fragrance or preservative sensitivities
- Typical exposure is generally recognized as safe, but widespread use means cumulative exposure across multiple products
Science: Benzoic acid and its derivatives are widely used as preservatives in food, cosmetics, and pharmaceuticals with established safety profiles at typical concentrations. Limited peer-reviewed data specifically addressing dermal safety in skincare formulations; most safety data derives from food additive studies and general preservative toxicology rather than cosmetic-specific clinical trials.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients