Ingredients
-
Analysis not yet available for this ingredient.
-
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Trehalose is a naturally occurring sugar (disaccharide) used in skincare products for its stabilizing and protective properties. It helps preserve the integrity of skin cells and other ingredients, particularly when exposed to environmental stressors like heat or dryness.
Benefits
- Helps stabilize and protect skin cells from damage
- May improve skin barrier function and reduce moisture loss
- Supports ingredient stability in formulations
Science: Trehalose is widely recognized in biopharmaceutical and cosmetic industries for its cryoprotective and stabilizing properties. While peer-reviewed evidence specifically for topical skincare benefits is limited, research demonstrates its effectiveness as a cellular protectant and its ability to enhance the uptake and efficacy of other beneficial compounds in tissues.
Analyze Ingredient Further→ -
Sodium hyaluronate is the salt form of hyaluronic acid, a naturally occurring substance found in your skin that acts like a moisture magnet. In skincare products, it absorbs water from the environment and binds it to your skin, helping to hydrate and plump the skin's surface.
Benefits
- Delivers intense hydration to the skin
- Helps reduce the appearance of fine lines by improving skin moisture
- Supports skin barrier function
- Suitable for all skin types, including sensitive and oily skin
Potential concerns
- In very dry climates with low humidity, it may draw moisture from deeper skin layers if not sealed with an occlusive product
- Rare allergic reactions are possible but extremely uncommon
Science: While the provided research focuses on intra-articular injections for joint health (showing good safety and efficacy), hyaluronic acid and its salt form are well-established in dermatology for topical hydration. The molecule's safety profile is well-documented across decades of use in medical and cosmetic applications, with severe adverse reactions being extremely rare.
Analyze Ingredient Further→ -
Caprylyl glycol is a preservative and skin-conditioning ingredient derived from coconut oil. It helps prevent bacterial and mold growth in skincare products while also providing mild hydrating and humectant benefits to the skin.
Benefits
- Helps preserve product freshness and prevent contamination
- Provides gentle humectant properties to help retain skin moisture
- Often used as a gentler alternative to traditional preservatives
Potential concerns
- Rare cases of allergic contact dermatitis have been reported in sensitive individuals
- May cause irritation in those with known sensitivity to glycols
Science: A 200-subject repeat patch test study found no delayed hypersensitivity reactions to caprylyl glycol at typical use concentrations. However, isolated case reports of allergic contact dermatitis exist, suggesting it can act as an allergen in susceptible individuals. It is widely used in infant and sensitive-skin formulations as a preservative alternative.
Analyze Ingredient Further→ -
Hydrogenated lecithin is a plant-derived phospholipid that has been chemically stabilized to resist oxidation and spoilage. In skincare products, it functions as an emulsifier (helping mix oil and water), a skin-conditioning agent, and a delivery system for other active ingredients.
Benefits
- Stabilizes emulsions and improves product texture
- Enhances penetration of other skincare actives into the skin
- Biocompatible and derived from natural plant sources
- Helps formulate advanced delivery systems like liposomes and micelles
Science: Recent peer-reviewed research (2025) confirms hydrogenated lecithin is highly stable and soluble in cosmetic formulations, with strong emulsifying properties and ability to improve ingredient absorption through the skin barrier. The hydrogenation process eliminates the oxidation concerns present in unprocessed lecithin, making it a reliable excipient for cosmetic and pharmaceutical applications.
Analyze Ingredient Further→ -
Hexylene glycol is a lightweight humectant and preservative booster used in skincare products to help retain moisture and improve product stability. It also enhances the penetration of other active ingredients into the skin.
Benefits
- Helps skin retain moisture
- Improves product texture and spreadability
- Enhances effectiveness of preservative systems
Potential concerns
- May cause mild irritation or redness in sensitive individuals (occurs in roughly 3% of eczema-prone skin)
- Potential for delayed allergic contact reactions in susceptible people, though this is uncommon
- Less irritating than propylene glycol under occlusion, but still worth avoiding if you have known sensitivities to glycols
Science: A 1989 study found hexylene glycol caused visible skin reactions in 2.8% of eczema patients at high concentrations (30-50%), with potential for delayed allergic sensitization in rare cases. It was less irritating than propylene glycol. One case report mentions hexylene glycol as a potential allergen in medical formulations, though reactions are uncommon at typical cosmetic concentrations.
Analyze Ingredient Further→ -
Citric acid is a naturally occurring organic acid commonly used in skincare products as an exfoliant and pH balancer. It belongs to a group of ingredients called alpha-hydroxy acids (AHAs) that help remove dead skin cells from the surface.
Benefits
- Gentle exfoliation to improve skin texture and appearance
- Helps reduce the appearance of keratosis and acne
- Balances product pH to maintain skin compatibility
Potential concerns
- Can cause irritation, redness, or sensitivity in some users, especially with prolonged or frequent use
- May increase sun sensitivity — sunscreen use is recommended when using AHA products
- Not suitable for very sensitive or compromised skin without caution
Science: Citric acid is an established AHA used in cosmetics for superficial peeling and skin appearance improvement, though research emphasizes that caution should be exercised due to potential adverse reactions. It is widely produced industrially and well-established in skincare formulations.
Analyze Ingredient Further→ -
Sodium benzoate is a preservative used in skincare products to prevent bacterial and fungal growth, extending shelf life. It's a salt derived from benzoic acid and is one of the most widely used preservatives in cosmetics, skincare, and food products.
Benefits
- Prevents microbial contamination and extends product shelf life
- Generally effective at low concentrations (0.1-0.5%)
- Approved for cosmetic use by major regulatory bodies
Potential concerns
- Can cause allergic contact dermatitis in sensitive individuals; identified as an allergen in medical hand cleansers
- Recent research suggests long-term oral intake may affect bone health and increase osteoporosis risk, though topical skincare exposure is minimal
Science: Sodium benzoate is well-established as a safe preservative in cosmetics at typical use levels. However, emerging research indicates that chronic systemic intake may interfere with bone metabolism through the FGF2/p38/RUNX2 pathway. For topical skincare use, the exposure and absorption are minimal compared to dietary intake, but individuals with known sensitivities should avoid it.
Analyze Ingredient Further→ -
Propanediol is a lightweight humectant—a molecule that draws water into the skin to keep it hydrated. It's also used in cosmetic formulations as a solvent and preservative booster, helping products stay stable and feel smooth on the skin.
Benefits
- Hydrates and moisturizes the skin
- Improves product texture and spreadability
- Helps preserve formulations naturally
Science: Propanediol can be produced through bio-based fermentation (from glycerol using microorganisms), making it an environmentally friendly alternative to traditional chemical synthesis. It is widely recognized as safe in cosmetic and food applications, with established use as both a humectant and preservative enhancer.
Analyze Ingredient Further→ -
Pentylene glycol is a lightweight humectant—a ingredient that draws water into the skin to improve hydration and texture. It's commonly used in serums, sunscreens, and moisturizers as a preservative booster and skin-conditioning agent.
Benefits
- Improves skin hydration by attracting moisture
- Lightweight feel, absorbs quickly without heaviness
- Helps preserve product stability and extends shelf life
Potential concerns
- Rare contact allergy reported in sensitive individuals
- Emerging evidence suggests it may be an uncommon cosmetic allergen—if you have sensitive or reactive skin, patch test first
Science: Safety studies show a high margin of safety at standard use levels (87–671 in adults), with minimal skin penetration due to the ingredient's volatility. However, recent dermatological reports flag pentylene glycol as an emerging contact allergen in some individuals, warranting attention for those with sensitive skin.
Analyze Ingredient Further→ -
Tocopherol is a form of vitamin E, a fat-soluble antioxidant that protects skin from damage caused by free radicals and oxidative stress. It helps maintain skin's natural barrier function and is commonly used in skincare products to prevent premature aging and support overall skin health.
Benefits
- Protects skin from free radical damage and oxidative stress
- Supports skin barrier function and moisture retention
- May help reduce signs of aging caused by UV exposure and environmental damage
- Works as a lipid antioxidant to prevent degradation of skin oils
Science: Tocopherol (α-tocopherol) is recognized in peer-reviewed research as a key endogenous defense mechanism against oxidative stress in aging skin, particularly from UV-induced damage. Studies confirm it functions as a lipid-soluble antioxidant capable of preventing lipid peroxidation, with established efficacy in cosmetic and therapeutic applications.
Analyze Ingredient Further→ -
Isopropyl Titanium Triisostearate is a titanium-based compound that acts as a surface modifier in skincare formulations. It helps stabilize and improve the texture of creams and lotions by modifying how ingredients interact at surfaces within the product.
Benefits
- Improves product texture and spreadability
- Helps stabilize emulsions (oil-water mixtures) in creams and lotions
- Enhances the cosmetic feel of skincare formulations
Science: The Expert Panel for Cosmetic Ingredient Safety (2025) concluded that Isopropyl Titanium Triisostearate is safe in cosmetics at current concentrations and uses. Research on related titanium compounds indicates they can help stabilize emulsion formulations without destabilizing effects.
Analyze Ingredient Further→ -
Lecithin is a naturally derived ingredient that acts as an emulsifier and skin conditioner in skincare products. It helps blend water and oil-based ingredients together and can improve the texture and feel of creams and lotions on your skin.
Benefits
- Helps create smooth, blended formulations
- Conditions and softens skin
- Improves product texture and spreadability
Science: The Cosmetic Ingredient Review Expert Panel concluded that lecithin and related phosphoglycerides are safe for use in cosmetics at concentrations up to 50%, based on comprehensive safety assessment. While lecithin can have physiological effects when ingested, these effects are not reproduced through topical skin application.
Analyze Ingredient Further→ -
Titanium dioxide is a naturally occurring mineral that works as a physical UV filter and opacifying agent in skincare products. It sits on the skin's surface and reflects and scatters UV rays to provide broad-spectrum sun protection, and is also commonly used in foundations and powders to create coverage and a matte finish.
Benefits
- Provides broad-spectrum UVA and UVB protection
- Physical (non-chemical) sun filter suitable for sensitive skin
- Helps create opaque, matte finishes in makeup and tinted products
Potential concerns
- May leave a white cast on darker skin tones due to its opacity
- Can feel slightly heavy or occlusive on very oily skin types
- Rarely, inhalation of airborne powder particles may be a concern in occupational settings, though not in typical consumer use
Science: Titanium dioxide has a long history of safe use in cosmetics and is approved by the FDA, EU, and other major regulatory bodies as a sunscreen active ingredient. It is considered non-toxic and non-penetrating when applied topically in skincare products.
Analyze Ingredient Further→ -
Iron Oxides (CI 77491) is a naturally derived colorant used to provide red, brown, and yellow tints to skincare and cosmetic products. It's an inert mineral pigment that sits on the skin's surface and doesn't penetrate deeply, making it primarily a coloring agent rather than an active skincare ingredient.
Benefits
- Provides natural color to products without synthetic dyes
- Stable and long-lasting pigment that doesn't fade easily
- Non-toxic mineral alternative to synthetic colorants
Potential concerns
- Minimal risk for most people; however, those with very sensitive skin or metal sensitivities should patch-test first
- Can potentially cause irritation if product formulation is poor or concentration is unusually high
Science: Iron Oxides are widely approved as safe colorants by regulatory bodies including the FDA and EU. Limited peer-reviewed data exists specifically examining consumer skincare use, but decades of cosmetic safety data support their safety profile in topical applications.
Analyze Ingredient Further→ -
Silica is a mineral powder derived from silicon dioxide that's commonly used in skincare and makeup products. It works primarily as a texture enhancer and absorbent, helping to mattify skin, improve product feel, and absorb excess oil.
Benefits
- Mattifies skin and reduces shine
- Improves product texture and spreadability
- Absorbs excess sebum and moisture
- Creates a smooth, refined appearance
Potential concerns
- When used as nanoparticles, potential for skin penetration remains under study
- Inhalation of silica powder (primarily occupational concern) has known health risks; topical use in cosmetics is considered lower risk
- Listed among potential carcinogenic substances in cosmetic formulations, though safe use levels and regulatory limits are established in the EU and US
Science: A 2023 review of European facial cosmetics identified silica among potential carcinogenic ingredients present in commercial products, though this reflects presence rather than proven harm at typical use concentrations. Research on silica nanoparticles suggests they are being developed for cosmetic use, but percutaneous penetration and long-term safety data remain limited. Regulatory agencies (EU, FDA) have established safe concentration limits for cosmetic use.
Analyze Ingredient Further→ -
Squalane is a lightweight, skin-identical oil derived from squalene (a natural component of human sebum). It absorbs easily into the skin to lock in moisture and create a smooth, soft feel without leaving a greasy residue.
Benefits
- Hydrates and moisturizes skin
- Mimics skin's natural oils for better compatibility
- Lightweight emollient that doesn't clog pores
- Antioxidant properties
- Well-tolerated by most skin types
Science: The Cosmetic Ingredient Review Expert Panel confirmed squalane is safe for cosmetic use at typical concentrations (2023). Research demonstrates skin hydrating and emollient activity, and squalane is naturally present in human sebum at ~13%, making it biocompatible with skin.
Analyze Ingredient Further→ -
2-Hexanediol is a humectant and preservative booster commonly used in skincare products to help retain moisture and extend shelf life. It works by drawing water into the skin while also enhancing the effectiveness of other preservatives, allowing brands to use lower amounts of traditional preservatives.
Benefits
- Hydrates and moisturizes skin by drawing in water
- Helps preserve products with lower preservative levels
- Works synergistically with other skincare ingredients like niacinamide
Potential concerns
- May cause cell viability concerns at concentrations above 1.0% in laboratory studies
- Limited real-world safety data in humans at typical skincare concentrations (usually 2-5%)
- Potential environmental concern if released into water systems
Science: While 2-hexanediol is widely used as a preservative substitute for parabens, recent cytotoxicity studies raise questions about safety at concentrations commonly found in skincare products (>2%). However, these findings are from laboratory cell studies and may not directly translate to human skin application. Further human safety studies are needed to confirm real-world risk.
Analyze Ingredient Further→ -
Xanthan gum is a natural thickener derived from fermented bacteria that helps give skincare products a smooth, gel-like texture. It stabilizes formulas and prevents ingredients from separating, while also helping products spread evenly on skin.
Benefits
- Creates smooth, pleasant texture
- Stabilizes emulsions and prevents separation
- Improves product spreadability and application
Science: Xanthan gum is an FDA-approved, anionic polysaccharide with a long history of safe use across food, pharmaceutical, and cosmetic industries since 1969. Its performance as a thickener and stabilizer is well-established in scientific literature, with no notable skin irritation concerns reported.
Analyze Ingredient Further→ -
Maltodextrin is a carbohydrate derived from starches like corn or potato. In skincare, it's used as a filler, thickener, and texture agent — it has no direct active benefit for skin itself.
Science: Maltodextrin is an inert, non-toxic carbohydrate commonly used as a placebo control in clinical nutrition studies, indicating excellent safety and tolerability. No adverse effects on skin health or systemic absorption concerns have been documented.
Analyze Ingredient Further→ -
Cholesterol is a naturally occurring fatty substance that is a key component of your skin's outermost barrier. In skincare products, it works alongside ceramides and fatty acids to help strengthen this barrier, keeping moisture in and irritants out.
Benefits
- Strengthens skin barrier function
- Helps retain skin hydration
- Works synergistically with ceramides and fatty acids for optimal barrier repair
Science: Cholesterol is a natural and essential component of the stratum corneum (outer skin layer), present in roughly equal amounts to ceramides and free fatty acids. Research shows that topical formulations combining cholesterol with ceramides and fatty acids in physiological ratios effectively support barrier function and can improve disturbed skin conditions.
Analyze Ingredient Further→ -
Glyceryl stearate is a natural emulsifier and thickener derived from vegetable oils and glycerin. It helps bind water and oil together in skincare formulas, creating a smooth texture while providing mild moisturizing properties.
Benefits
- Helps create stable, smooth product textures
- Mild emollient that softens skin
- Derived from natural sources (vegetable-based)
Science: The Cosmetic Ingredient Review Expert Panel confirmed in 2023 that glyceryl stearate and related glyceryl diesters are safe for cosmetic use at standard concentrations. Research indicates the ingredient has a skin-safe pH profile and demonstrates good stability in formulations.
Analyze Ingredient Further→ -
Palmitoyl Tripeptide-5 is a synthetic peptide—a short chain of amino acids—designed to communicate with skin cells. It's used in skincare products to help support the skin's natural barrier and reduce signs of sensitivity or irritation.
Benefits
- May help calm and soothe sensitive or irritated skin
- Works at low concentrations, making it efficient in formulas
- Can penetrate the outer layer of skin to reach cells below the surface
Science: Palmitoyl Tripeptide-5 is recognized as a signal peptide with potential benefits for sensitive skin, and appears in formulations alongside other peptide actives. However, most supporting evidence comes from manufacturer data and patents rather than independent clinical trials; only limited peer-reviewed studies have specifically tested this ingredient in humans with sensitive skin.
Analyze Ingredient Further→ -
Ceramide NP is a naturally-derived lipid that mimics ceramides found in healthy skin. It works to repair and strengthen your skin's protective barrier, helping it retain moisture and resist irritation.
Benefits
- Restores skin barrier function and structural integrity
- Reduces trans-epidermal water loss (helps skin stay hydrated)
- Strengthens skin's natural defense against irritants and environmental stressors
Science: Recent research demonstrates that Ceramide NP effectively recovers damaged skin barrier function and can be formulated into advanced delivery systems (like ethosomes) to enhance skin absorption. Studies show it meaningfully lowers water loss while restoring epidermis structure in compromised skin.
Analyze Ingredient Further→ -
Beta-glucan is a naturally occurring polysaccharide (a type of carbohydrate) derived from sources like yeast, fungi, and grains. In skincare, it works to hydrate the skin and support its natural barrier function, helping it retain moisture and maintain resilience.
Benefits
- Hydration and moisture retention
- Skin barrier support and strengthening
- Antioxidant properties to help protect against environmental stress
- May support skin regeneration and anti-aging effects
Science: Recent research indicates beta-glucan has multifunctional properties for skin health, including moisturizing, antioxidant, and regenerating activities. When formulated into advanced delivery systems, it shows improved bioavailability and effectiveness for anti-aging skincare.
Analyze Ingredient Further→ -
Glyceryl Caprylate is a mild emulsifier and penetration enhancer derived from glycerin and caprylic acid (a natural fatty acid). In skincare products, it helps blend water and oil-based ingredients together and can improve how active ingredients absorb into the skin.
Benefits
- Helps formulations blend water and oil ingredients
- May enhance absorption of other skincare actives
- Mild and generally well-tolerated by most skin types
Science: Safety assessments by the Cosmetic Ingredient Review panel confirm glyceryl caprylate is safe for cosmetic use. Research demonstrates it functions effectively as a penetration enhancer in topical formulations, helping active ingredients reach deeper skin layers.
Analyze Ingredient Further→ -
Caprylhydroxamic Acid is a preservative and chelating agent used in skincare products to prevent microbial growth and extend shelf life. It's a multifunctional ingredient increasingly used as an alternative to traditional preservatives in formulas designed for sensitive skin.
Benefits
- Preserves products by preventing bacterial and microbial growth
- Chelates metal ions that can degrade product quality
- Gentler alternative to some conventional preservatives, particularly for sensitive skin formulations
Potential concerns
- May cause skin sensitization, especially when applied to damaged or compromised skin
- Requires careful formulation to minimize skin penetration and reduce irritation potential
Science: The Expert Panel for Cosmetic Ingredient Safety concluded that Caprylhydroxamic Acid is safe at current usage levels and concentrations, but advised caution against formulations that increase skin penetration. Research shows it is used at safe levels in infant and sensitive-skin cosmetics as a preservative alternative.
Analyze Ingredient Further→ -
Sodium Acrylates Copolymer is a synthetic polymer that acts as a thickener and film-former in skincare products. It helps create a smooth texture, improve product consistency, and can form a light protective layer on the skin's surface.
Benefits
- Improves product texture and spreadability
- Creates a light, breathable film on skin
- Helps stabilize formulations
Science: Limited peer-reviewed data available for this ingredient. It is listed as safe by regulatory bodies (FDA, EU) and has a long history of use in cosmetics with low sensitization potential.
Analyze Ingredient Further→ -
Ceramide AP is a naturally occurring lipid that mimics ceramides found in your skin's outer barrier. It helps restore and maintain the skin's protective layer, reducing moisture loss and supporting overall skin health.
Benefits
- Strengthens skin barrier function
- Reduces transepidermal water loss (TEWL)
- Improves skin hydration and moisture retention
- Helps repair compromised or damaged skin barriers
Science: Research confirms ceramide AP is essential for proper stratum corneum (outer skin layer) barrier function and can be effectively incorporated into skincare formulations. Studies using advanced biophysical methods have demonstrated that ceramide AP integrates properly into skin lipid structures, supporting its use as a barrier-repair ingredient.
Analyze Ingredient Further→ -
Ceramide EOP is a plant-derived ceramide that mimics the natural lipids found in your skin's outer barrier. It helps repair and strengthen this protective layer, reducing moisture loss and keeping skin hydrated and resilient.
Benefits
- Strengthens skin barrier
- Reduces water loss and improves hydration
- Soothes dry or sensitive skin
- Helps restore skin's natural lipid balance
Science: Ceramides are well-established in skincare science as essential components of the skin barrier. While specific peer-reviewed studies on Ceramide EOP are limited, ceramides as a class are extensively documented as safe and effective for barrier repair and moisturization.
Analyze Ingredient Further→ -
Castor seed oil is a natural oil extracted from castor plant seeds that acts as a skin conditioner and emulsifier in skincare products. It helps soften skin, stabilize formulas, and can provide mild UV protection.
Benefits
- Softens and conditions skin
- Helps stabilize product formulas
- Mild natural UV absorption
- Generally well-tolerated on skin
Potential concerns
- May enhance penetration of other ingredients through skin (can be beneficial or problematic depending on formula)
- Potential for sensitivity in individuals with castor seed allergies (rare)
Science: Multiple safety assessments by the Cosmetic Ingredient Review Expert Panel (2007, 2025) have concluded castor seed oil and related derivatives are safe for cosmetic use at typical concentrations. The oil is free of ricin (a toxic protein) because ricin does not partition into the oil during extraction. Animal and human safety data support its use in concentrations up to 81% in products like lipsticks.
Analyze Ingredient Further→ -
A synthetic polymer made from caprylic acid and sebacic acid, this ingredient functions as a film-former and texture enhancer in skincare products. It helps create a smooth, lightweight feel on the skin while providing a subtle protective layer that can improve product spreadability and adherence.
Benefits
- Creates a smooth, even texture in formulations
- Helps products glide smoothly across skin
- Provides light film-forming properties for product longevity
Science: Limited peer-reviewed data available for this ingredient. It is derived from common cosmetic building blocks (caprylic and sebacic acids) and is used in small concentrations as a functional additive rather than an active ingredient, suggesting a favorable safety profile in typical skincare use.
Analyze Ingredient Further→ -
Octyldodecyl Stearoyl Stearate is a synthetic ester derived from stearic acid that works as an emollient and thickening agent. It helps create a smooth texture in formulations and conditions the skin by forming a protective layer on the surface.
Benefits
- Smooths and softens skin texture
- Improves product consistency and spreadability
- Creates a lightweight conditioning layer without significant penetration
Potential concerns
- May cause mild irritation in sensitive individuals or at high concentrations (7.5–20% range)
- Can cause mild ocular (eye) irritation if direct contact occurs
- Very limited data available; safety conclusions rely partly on related ingredient profiles
Science: Safety panel review found that 95% of applied Octyldodecyl Stearoyl Stearate remains on the skin surface with minimal penetration, reducing systemic exposure concerns. Clinical testing at typical use concentrations (2–15%) showed non- to mild irritation and no sensitization or mutagenic effects.
Analyze Ingredient Further→ -
Tetrasodium Glutamate Diacetate is a chelating agent that binds to metal ions (like calcium and iron) in skincare formulations, preventing them from causing unwanted chemical reactions or product degradation. It helps keep products stable and effective over time.
Benefits
- Stabilizes skincare formulations by controlling metal ion activity
- Helps prevent product discoloration and oxidation
- Allows products to maintain consistency and efficacy during storage
Science: The Cosmetic Ingredient Review Expert Panel concluded in 2025 that Tetrasodium Glutamate Diacetate is safe for use in cosmetics at typical concentrations. Research shows it functions effectively as a chelator, with strong binding capacity for metals like calcium and iron.
Analyze Ingredient Further→ -
Ectoin is a natural amino acid derivative originally found in salt-loving bacteria. In skincare, it works as a protective and hydrating ingredient that helps shield skin from stress, environmental damage, and signs of aging while supporting the skin's natural repair processes.
Benefits
- Reduces inflammation and calms irritated skin
- Protects skin from oxidative stress and free radical damage
- Boosts skin hydration and moisture retention
- Supports collagen production and skin firmness
- May help counteract stress-related skin damage, including sensitivity and loss of elasticity
- Promotes skin cell repair and renewal
Science: Recent peer-reviewed research demonstrates that ectoin has significant anti-inflammatory and antioxidant properties, with studies showing it reduces inflammatory markers in skin cells and decreases harmful free radicals. Research also indicates ectoin can help counteract cortisol-induced skin stress and support collagen maintenance, particularly when combined with hyaluronic acid for enhanced skin penetration.
Analyze Ingredient Further→ -
C15-19 Alkane is a lightweight, synthetic oil derived from petroleum that works as an emollient and texture enhancer in skincare formulas. It helps soften skin, reduces friction, and gives products a smooth, non-greasy feel.
Benefits
- Lightweight moisturizing without heaviness
- Reduces friction and improves glide on skin
- Enhances product texture and spreadability
- Creates a smooth, silky finish
Science: Research demonstrates that C15-19 Alkane formulations perform well in emulsion stability studies and sensory testing, with variants showing strong lubricating properties and skin-feel characteristics. The ingredient is widely used in cosmetic formulations and has a well-established safety profile in skincare applications.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
3-Butanediol is a lightweight humectant and preservative booster that helps skin retain moisture and improves product stability. It's a small-molecule alcohol derived from fermentation or petroleum that works to keep formulations fresh while enhancing skin hydration.
Benefits
- Hydration and moisture retention
- Preservative enhancement
- Lightweight texture and quick absorption
- Antimicrobial properties
Science: 3-Butanediol is recognized as a safe ingredient across cosmetic, pharmaceutical, and food industries with established usage history. Research indicates it can be produced sustainably through microbial fermentation, making it an increasingly preferred alternative to petroleum-based production methods.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients