Ingredients
-
Analysis not yet available for this ingredient.
-
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Sodium hyaluronate is the salt form of hyaluronic acid, a naturally occurring substance found in your skin that acts like a moisture magnet. In skincare products, it absorbs water from the environment and binds it to your skin, helping to hydrate and plump the skin's surface.
Benefits
- Delivers intense hydration to the skin
- Helps reduce the appearance of fine lines by improving skin moisture
- Supports skin barrier function
- Suitable for all skin types, including sensitive and oily skin
Potential concerns
- In very dry climates with low humidity, it may draw moisture from deeper skin layers if not sealed with an occlusive product
- Rare allergic reactions are possible but extremely uncommon
Science: While the provided research focuses on intra-articular injections for joint health (showing good safety and efficacy), hyaluronic acid and its salt form are well-established in dermatology for topical hydration. The molecule's safety profile is well-documented across decades of use in medical and cosmetic applications, with severe adverse reactions being extremely rare.
Analyze Ingredient Further→ -
Citric acid is a naturally occurring organic acid commonly used in skincare products as an exfoliant and pH balancer. It belongs to a group of ingredients called alpha-hydroxy acids (AHAs) that help remove dead skin cells from the surface.
Benefits
- Gentle exfoliation to improve skin texture and appearance
- Helps reduce the appearance of keratosis and acne
- Balances product pH to maintain skin compatibility
Potential concerns
- Can cause irritation, redness, or sensitivity in some users, especially with prolonged or frequent use
- May increase sun sensitivity — sunscreen use is recommended when using AHA products
- Not suitable for very sensitive or compromised skin without caution
Science: Citric acid is an established AHA used in cosmetics for superficial peeling and skin appearance improvement, though research emphasizes that caution should be exercised due to potential adverse reactions. It is widely produced industrially and well-established in skincare formulations.
Analyze Ingredient Further→ -
Potassium sorbate is a preservative used in skincare products to prevent the growth of mold, yeast, and some bacteria, helping extend shelf life. It's a salt derived from sorbic acid and is commonly used as a gentler alternative to stronger chemical preservatives.
Benefits
- Prevents microbial contamination and mold growth
- Generally considered milder than some other preservatives like benzalkonium chloride
- Allows products to remain effective longer without refrigeration
Potential concerns
- May cause irritation or allergic contact dermatitis in sensitive individuals
- Not suitable for preservative-free formulations
- Limited effectiveness against some bacteria compared to stronger preservatives
Science: Clinical research suggests potassium sorbate is less damaging to delicate tissues than benzalkonium chloride, making it a preferred alternative preservative in sensitive applications like eye products. However, peer-reviewed safety data specific to topical skincare use in the general population is limited.
Analyze Ingredient Further→ -
Sodium benzoate is a preservative used in skincare products to prevent bacterial and fungal growth, extending shelf life. It's a salt derived from benzoic acid and is one of the most widely used preservatives in cosmetics, skincare, and food products.
Benefits
- Prevents microbial contamination and extends product shelf life
- Generally effective at low concentrations (0.1-0.5%)
- Approved for cosmetic use by major regulatory bodies
Potential concerns
- Can cause allergic contact dermatitis in sensitive individuals; identified as an allergen in medical hand cleansers
- Recent research suggests long-term oral intake may affect bone health and increase osteoporosis risk, though topical skincare exposure is minimal
Science: Sodium benzoate is well-established as a safe preservative in cosmetics at typical use levels. However, emerging research indicates that chronic systemic intake may interfere with bone metabolism through the FGF2/p38/RUNX2 pathway. For topical skincare use, the exposure and absorption are minimal compared to dietary intake, but individuals with known sensitivities should avoid it.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Pentylene glycol is a lightweight humectant—a ingredient that draws water into the skin to improve hydration and texture. It's commonly used in serums, sunscreens, and moisturizers as a preservative booster and skin-conditioning agent.
Benefits
- Improves skin hydration by attracting moisture
- Lightweight feel, absorbs quickly without heaviness
- Helps preserve product stability and extends shelf life
Potential concerns
- Rare contact allergy reported in sensitive individuals
- Emerging evidence suggests it may be an uncommon cosmetic allergen—if you have sensitive or reactive skin, patch test first
Science: Safety studies show a high margin of safety at standard use levels (87–671 in adults), with minimal skin penetration due to the ingredient's volatility. However, recent dermatological reports flag pentylene glycol as an emerging contact allergen in some individuals, warranting attention for those with sensitive skin.
Analyze Ingredient Further→ -
Panthenol is a lightweight humectant derived from pantothenic acid (vitamin B5) that draws moisture into the skin and helps maintain hydration. It also supports the skin barrier and can help soothe irritation, making it a popular choice in products designed for sensitive or compromised skin.
Benefits
- Hydrates and moisturizes the skin
- Helps calm and soothe irritated or sensitive skin
- Supports skin barrier function and repair
- Lightweight and non-greasy
Science: Panthenol is one of the few ingredients in sensitive skin formulations with clinical evidence specifically tested on volunteers with sensitive skin. Research confirms it reduces skin inflammation and supports barrier function, though comprehensive clinical studies on this ingredient remain limited compared to some alternatives.
Analyze Ingredient Further→ -
Ethylhexylglycerin is a preservative and antimicrobial ingredient used to prevent bacterial growth and extend shelf life in skincare products. It's a multifunctional ingredient that helps keep formulations stable and free from contamination.
Benefits
- Prevents bacterial contamination in products
- Helps extend product shelf life
- Works synergistically with other preservatives for enhanced protection
Potential concerns
- May not be effective against all bacterial species (notably some Pseudomonas aeruginosa strains)
- Preservative-related sensitization possible in sensitive individuals, though uncommon
Science: Research shows ethylhexylglycerin has broad antimicrobial activity against many common cosmetic contaminants, though effectiveness varies by bacterial species. Studies demonstrate it can work synergistically with other preservative components to enhance biofilm inhibition.
Analyze Ingredient Further→ -
Lactic acid is a mild chemical exfoliant that works by gently dissolving the bonds between dead skin cells on the surface, helping to slough them away. It's an alpha hydroxy acid (AHA) derived from milk fermentation and is gentler than stronger exfoliants, making it suitable for sensitive skin types.
Benefits
- Gently exfoliates dead skin cells for a smoother texture
- Improves skin radiance and brightness
- Helps reduce the appearance of fine lines and uneven skin tone
- Supports skin hydration by improving moisture absorption
Potential concerns
- Can cause redness, stinging, or irritation, especially at higher concentrations or on sensitive skin
- Increases sun sensitivity — daily SPF is essential when using
- May irritate active acne or compromised skin barrier
- Can cause dryness if overused or not followed with adequate moisturizer
Science: Lactic acid is widely recognized as an effective gentle exfoliant for improving skin texture and hydration. It has a longer history of safe topical use in dermatology compared to stronger AHAs, though it requires proper formulation (typically 5-12% for leave-on products) and concurrent sun protection to minimize irritation risk.
Analyze Ingredient Further→ -
Xanthan gum is a natural thickener derived from fermented bacteria that helps give skincare products a smooth, gel-like texture. It stabilizes formulas and prevents ingredients from separating, while also helping products spread evenly on skin.
Benefits
- Creates smooth, pleasant texture
- Stabilizes emulsions and prevents separation
- Improves product spreadability and application
Science: Xanthan gum is an FDA-approved, anionic polysaccharide with a long history of safe use across food, pharmaceutical, and cosmetic industries since 1969. Its performance as a thickener and stabilizer is well-established in scientific literature, with no notable skin irritation concerns reported.
Analyze Ingredient Further→ -
Carbomer is a thickening agent and stabilizer that gives skincare products their gel-like texture. It helps create a smooth, spreadable consistency and can hold active ingredients in place on the skin for better absorption.
Benefits
- Creates a smooth, easy-to-apply gel texture
- Helps stabilize and thicken formulations
- Can improve how long active ingredients stay on the skin
- Allows better delivery of beneficial compounds into deeper skin layers
Potential concerns
- Can occasionally cause irritation or sensitivity in very reactive skin types
- Requires proper pH adjustment in formulations (formulators use this, not consumers)
Science: Research shows carbomer is commonly used as a gel base in advanced skincare delivery systems, including those designed for anti-inflammatory and healing treatments. Studies indicate it effectively works with active ingredients like nanoparticles and botanical extracts to improve their penetration and efficacy on skin.
Analyze Ingredient Further→ -
Sodium phytate is a naturally derived ingredient that acts as a chelating agent, binding to minerals and metals on the skin's surface. In skincare, it's primarily studied for its potential brightening and clarifying properties, though research in this area remains limited.
Benefits
- May help brighten skin appearance
- Potential mild exfoliating or clarifying effect
- Naturally derived ingredient
Potential concerns
- Very limited safety data in skincare applications
- Chelating agents can potentially disrupt skin barrier minerals if used excessively
- Most research focuses on dental use rather than facial skincare
Science: Available research on sodium phytate focuses primarily on dental whitening toothpaste rather than skincare products. One 2025 clinical trial showed modest whitening effects in toothpaste formulations over 3-4 weeks, but efficacy plateaued. Peer-reviewed safety and efficacy data specifically for facial skincare use is limited.
Analyze Ingredient Further→ -
Methylpropanediol is a lightweight humectant and preservative booster commonly used in skincare formulations. It helps products stay stable while drawing moisture into the skin, making it useful in serums, moisturizers, and other hydrating products.
Benefits
- Humectant that helps skin retain moisture
- Enhances the preservative system in formulations
- Light texture that absorbs easily without greasiness
Science: Research confirms methylpropanediol functions effectively as a polyol solvent in cosmetic formulations and is recognized as a safe alternative preservative booster. The ingredient has been validated in quality control testing of commercial skincare products with good safety margins.
Analyze Ingredient Further→ -
Glycereth-26 is a humectant derived from glycerin that helps skin retain moisture. It also functions as a texture modifier in formulations, making products feel lighter and easier to spread.
Benefits
- Hydrates and moisturizes skin
- Improves product texture and spreadability
- Skin-conditioning agent
Potential concerns
- May cause irritation in sensitive individuals if formula is not properly balanced
Science: A 2025 Expert Panel for Cosmetic Ingredient Safety review assessed glycerin ethoxylates (the ingredient class containing Glycereth-26) and concluded they are safe in cosmetics at current usage levels when formulated to be non-irritating. No significant safety concerns were identified.
Analyze Ingredient Further→ -
Hydroxyethylcellulose (HEC) is a thickening and gelling agent derived from cellulose, a natural plant material. In skincare products, it creates a smooth texture, helps bind ingredients together, and improves how products feel and spread on skin.
Benefits
- Creates a smooth, even texture in gels and creams
- Helps products spread easily without feeling heavy
- Non-ionic, meaning it works well with most other skincare ingredients
- Biocompatible and generally well-tolerated by skin
Science: HEC is documented as biocompatible, biodegradable, nontoxic, and water-soluble in peer-reviewed literature. It is widely used in cosmetic and pharmaceutical formulations as a gelling and thickening agent with a strong safety profile in topical applications.
Analyze Ingredient Further→ -
Aloe Barbadensis Leaf Juice is the clear gel extracted from the inner part of the aloe vera leaf. In skincare, it functions as a skin-conditioning agent known for its soothing and hydrating properties, and is typically used at low concentrations (usually under 1%).
Benefits
- Soothing and anti-inflammatory properties
- Hydrating and skin-conditioning
- Antimicrobial and wound-healing support
Potential concerns
- Whole leaf aloe (including latex) contains anthraquinones that can cause photosensitivity and irritation; reputable products use only the inner gel
- High oral doses in animal studies showed reproductive toxicity and developmental effects; topical use in cosmetics at low concentrations is considered safe
- Potential for allergic contact dermatitis in sensitive individuals
Science: A 2007 safety review by the Cosmetic Ingredient Review panel concluded aloe-derived ingredients are safe for cosmetic use when the phototoxic anthraquinone content is limited to 50 ppm or lower and concentrations remain at 1% or less. The inner gel (polysaccharides) is well-tolerated topically, though oral studies at high doses showed concerns unrelated to typical skincare application.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Amylopectin is a naturally derived starch component extracted from grains like rice. In skincare, it functions as a binder and film-former that helps products adhere to skin and creates a smooth texture.
Benefits
- Helps products stay on skin longer
- Creates a smooth, comfortable feel
- Natural origin from edible grains
- Supports hydration barrier through hydrogen bonding
Science: Research demonstrates amylopectin's excellent biocompatibility and skin adhesion properties through hydrogen bonding interactions. Studies confirm its safety profile and degradability, with applications validated in direct skin contact scenarios including sensitive use cases like enzyme activity monitoring.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients