👎 0
Ingredients
-
Analysis not yet available for this ingredient.
-
Butylene glycol is a humectant—a type of ingredient that draws water into the skin and helps it stay hydrated. It's a small, lightweight molecule commonly used in moisturizers to improve hydration without leaving a heavy feel on the skin.
Benefits
- Increases skin hydration and moisture retention
- Lightweight and absorbs quickly
- Helps other active ingredients penetrate the skin more effectively
Science: Research demonstrates that butylene glycol, when combined with other humectants (like glycerin and hyaluronic acid) and occlusive ingredients in moisturizers, significantly improves skin hydration in both healthy skin and compromised skin conditions such as atopic dermatitis. It is recognized as a safe, effective humectant in dermatological formulations.
Analyze Ingredient Further→ -
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Trehalose is a naturally occurring sugar (disaccharide) used in skincare products for its stabilizing and protective properties. It helps preserve the integrity of skin cells and other ingredients, particularly when exposed to environmental stressors like heat or dryness.
Benefits
- Helps stabilize and protect skin cells from damage
- May improve skin barrier function and reduce moisture loss
- Supports ingredient stability in formulations
Science: Trehalose is widely recognized in biopharmaceutical and cosmetic industries for its cryoprotective and stabilizing properties. While peer-reviewed evidence specifically for topical skincare benefits is limited, research demonstrates its effectiveness as a cellular protectant and its ability to enhance the uptake and efficacy of other beneficial compounds in tissues.
Analyze Ingredient Further→ -
Sodium hyaluronate is the salt form of hyaluronic acid, a naturally occurring substance found in your skin that acts like a moisture magnet. In skincare products, it absorbs water from the environment and binds it to your skin, helping to hydrate and plump the skin's surface.
Benefits
- Delivers intense hydration to the skin
- Helps reduce the appearance of fine lines by improving skin moisture
- Supports skin barrier function
- Suitable for all skin types, including sensitive and oily skin
Potential concerns
- In very dry climates with low humidity, it may draw moisture from deeper skin layers if not sealed with an occlusive product
- Rare allergic reactions are possible but extremely uncommon
Science: While the provided research focuses on intra-articular injections for joint health (showing good safety and efficacy), hyaluronic acid and its salt form are well-established in dermatology for topical hydration. The molecule's safety profile is well-documented across decades of use in medical and cosmetic applications, with severe adverse reactions being extremely rare.
Analyze Ingredient Further→ -
Citric acid is a naturally occurring organic acid commonly used in skincare products as an exfoliant and pH balancer. It belongs to a group of ingredients called alpha-hydroxy acids (AHAs) that help remove dead skin cells from the surface.
Benefits
- Gentle exfoliation to improve skin texture and appearance
- Helps reduce the appearance of keratosis and acne
- Balances product pH to maintain skin compatibility
Potential concerns
- Can cause irritation, redness, or sensitivity in some users, especially with prolonged or frequent use
- May increase sun sensitivity — sunscreen use is recommended when using AHA products
- Not suitable for very sensitive or compromised skin without caution
Science: Citric acid is an established AHA used in cosmetics for superficial peeling and skin appearance improvement, though research emphasizes that caution should be exercised due to potential adverse reactions. It is widely produced industrially and well-established in skincare formulations.
Analyze Ingredient Further→ -
BHT (butylated hydroxytoluene) is a synthetic antioxidant used in skincare products to prevent oils and other ingredients from oxidizing and going rancid. It's used at very low concentrations (0.0002% to 0.5%) to extend shelf life.
Benefits
- Prevents product degradation and extends shelf life
- Keeps formulations stable over time
- Allows use of beneficial oils without them spoiling
Potential concerns
- Can cause skin irritation or allergic reactions in sensitive individuals at higher concentrations
- May cause mild contact sensitization in some people
- Minimal systemic absorption when applied to skin, but oral ingestion studies show potential liver and kidney effects at high doses
Science: The Cosmetic Ingredient Review Expert Panel concluded BHT is safe as used in cosmetic formulations at typical concentrations. When applied to skin, BHT remains largely in the skin with minimal systemic absorption, unlike oral exposure which showed some toxic effects in animal studies at high doses.
Analyze Ingredient Further→ -
Disodium EDTA is a chelating agent that binds to metals and minerals in skincare formulations, helping to preserve product stability and extend shelf life. It's used in small amounts (typically under 2%) to prevent unwanted chemical reactions that could degrade the formula.
Benefits
- Stabilizes cosmetic formulations by binding trace metals
- Extends product shelf life and maintains efficacy
- Allows other skincare ingredients to work more effectively
Potential concerns
- May increase skin penetration of other ingredients by chelating calcium in the skin barrier—only a concern if combined with potentially harmful substances
- Not absorbed through skin in normal use, but inhalation from sprays was identified as a theoretical concern in safety assessments
Science: The Cosmetic Ingredient Review Expert Panel confirmed safety in 2023 based on standard use concentrations. Clinical studies show no skin absorption; however, it can affect how other chemicals penetrate the skin, so formulators must account for this when combining with other actives.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Sodium Hydroxide is a strong alkaline chemical used in skincare products primarily as a pH buffer to neutralize acids and adjust the product's pH to safe levels for skin. It is not an active skincare ingredient and appears only in trace amounts in finished products.
Potential concerns
- In concentrated form, sodium hydroxide is caustic and can cause severe chemical burns; however, in cosmetic products it is diluted and pH-buffered to safe levels
- Undiluted or highly concentrated sodium hydroxide should never contact skin directly
Science: The provided research discusses sodium hydroxide only in a specialized medical context (10% solution for surgical cauterization of ingrown toenails), which is not relevant to cosmetic skincare use. In properly formulated skincare products, sodium hydroxide is used in minimal concentrations solely for pH adjustment and is considered safe by regulatory bodies including the FDA and EU.
Analyze Ingredient Further→ -
Salicylic acid is a beta hydroxy acid (BHA) that works by gently exfoliating the skin's surface and penetrating pores to remove dead skin cells and excess oil. It's commonly used in acne treatments and can help improve skin texture and clarity.
Benefits
- Helps reduce acne breakouts by unclogging pores
- Gently exfoliates to improve skin texture
- May help fade dark spots and improve uneven skin tone when used as part of combination treatments
Potential concerns
- Can cause dryness, irritation, or sensitivity, especially with frequent use or in higher concentrations
- May increase sun sensitivity, so daily sunscreen is recommended
- Not recommended during pregnancy without consulting a healthcare provider
Science: Salicylic acid is recognized as a first-line topical acne treatment and is considered safe for most users. Research also supports its use as an adjuvant therapy for melasma and hyperpigmentation when combined with other treatments. Start with lower concentrations and introduce gradually to minimize irritation.
Analyze Ingredient Further→ -
Alcohol Denat is denatured ethanol (regular alcohol) that has been made undrinkable by adding bitter-tasting substances. It's used in skincare products as a solvent and preservative to help dissolve other ingredients and extend shelf life.
Benefits
- Helps dissolve and blend skincare ingredients together
- Provides preservative function to prevent microbial growth
- Gives products a lightweight, fast-absorbing texture
Potential concerns
- Can be drying or irritating to sensitive skin with repeated use
- May cause stinging if applied to broken skin or open wounds
- High concentrations may trigger irritation in those with sensitive or reactive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded that Alcohol Denat and its various forms are safe as used in cosmetics. Denaturants added to prevent accidental ingestion (such as Denatonium Benzoate) show low systemic absorption and minimal irritation at typical skincare concentrations.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Benzophenone-4 is a chemical UV filter used in sunscreens and daily skincare to absorb ultraviolet (UV) radiation and protect skin from sun damage. It works by converting UV energy into heat on the skin's surface.
Benefits
- Provides UV protection against sun damage
- Helps prevent sunburn and skin aging from sun exposure
- Commonly used in broad-spectrum sunscreen formulations
Potential concerns
- May cause allergic contact dermatitis or photoallergy in sensitive individuals (approximately 5% of patch-tested patients in clinical studies)
- Can penetrate the skin barrier, though absorption levels appear lower in real-world use than predicted by laboratory tests
- Limited data on long-term systemic effects from cumulative skin absorption
Science: Recent research shows benzophenone-4 can penetrate intact skin in laboratory conditions, though actual blood concentrations from everyday use are significantly lower than theoretical predictions. Historical data indicates it has a higher rate of allergic sensitization compared to some other UV filters, affecting roughly 1 in 20 individuals tested for sunscreen allergy.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients