Ingredients
-
Analysis not yet available for this ingredient.
-
Butylene glycol is a humectant—a type of ingredient that draws water into the skin and helps it stay hydrated. It's a small, lightweight molecule commonly used in moisturizers to improve hydration without leaving a heavy feel on the skin.
Benefits
- Increases skin hydration and moisture retention
- Lightweight and absorbs quickly
- Helps other active ingredients penetrate the skin more effectively
Science: Research demonstrates that butylene glycol, when combined with other humectants (like glycerin and hyaluronic acid) and occlusive ingredients in moisturizers, significantly improves skin hydration in both healthy skin and compromised skin conditions such as atopic dermatitis. It is recognized as a safe, effective humectant in dermatological formulations.
Analyze Ingredient Further→ -
Sucrose is a natural sugar derived from sugar cane or sugar beets. In skincare, it's primarily used as a humectant to help the skin retain moisture, and as a texture enhancer in formulations. It can also serve as a gentle exfoliant in some products when used in granulated form.
Benefits
- Helps skin retain moisture
- Provides humectant properties to improve hydration
- Generally well-tolerated by most skin types
Potential concerns
- May feed acne-causing bacteria if not properly formulated
- Can leave skin sticky if used in high concentrations
- Potential for irritation in individuals with sensitive skin if concentration is excessive
Science: Limited peer-reviewed data available specifically evaluating sucrose as a skincare active ingredient. The provided research discusses sucrose only as a laboratory tool for isolating nanoparticles, not for its direct skincare benefits. Sucrose's use in cosmetics is well-established as a safe humectant and preservative agent based on decades of cosmetic industry use.
Analyze Ingredient Further→ -
Sodium hyaluronate is the salt form of hyaluronic acid, a naturally occurring substance found in your skin that acts like a moisture magnet. In skincare products, it absorbs water from the environment and binds it to your skin, helping to hydrate and plump the skin's surface.
Benefits
- Delivers intense hydration to the skin
- Helps reduce the appearance of fine lines by improving skin moisture
- Supports skin barrier function
- Suitable for all skin types, including sensitive and oily skin
Potential concerns
- In very dry climates with low humidity, it may draw moisture from deeper skin layers if not sealed with an occlusive product
- Rare allergic reactions are possible but extremely uncommon
Science: While the provided research focuses on intra-articular injections for joint health (showing good safety and efficacy), hyaluronic acid and its salt form are well-established in dermatology for topical hydration. The molecule's safety profile is well-documented across decades of use in medical and cosmetic applications, with severe adverse reactions being extremely rare.
Analyze Ingredient Further→ -
Caprylyl glycol is a preservative and skin-conditioning ingredient derived from coconut oil. It helps prevent bacterial and mold growth in skincare products while also providing mild hydrating and humectant benefits to the skin.
Benefits
- Helps preserve product freshness and prevent contamination
- Provides gentle humectant properties to help retain skin moisture
- Often used as a gentler alternative to traditional preservatives
Potential concerns
- Rare cases of allergic contact dermatitis have been reported in sensitive individuals
- May cause irritation in those with known sensitivity to glycols
Science: A 200-subject repeat patch test study found no delayed hypersensitivity reactions to caprylyl glycol at typical use concentrations. However, isolated case reports of allergic contact dermatitis exist, suggesting it can act as an allergen in susceptible individuals. It is widely used in infant and sensitive-skin formulations as a preservative alternative.
Analyze Ingredient Further→ -
Tocopheryl acetate is a stable form of vitamin E, a fat-soluble antioxidant that helps protect skin from damage caused by free radicals and oxidative stress. It's commonly used in skincare products because it's more shelf-stable than other vitamin E forms and may help support the skin's natural barrier function.
Benefits
- Antioxidant protection against environmental damage
- Supports skin barrier health
- Stable ingredient with good shelf life in formulations
Science: Tocopheryl acetate is a well-established vitamin E ester that the body converts to free vitamin E for use. Research shows it functions as a lipid-soluble antioxidant; one recent study found it contributed to a moisturizer's beneficial effects on skin microbiota balance in atopic dermatitis models, though more direct clinical evidence on topical efficacy is limited.
Analyze Ingredient Further→ -
Hexylene glycol is a lightweight humectant and preservative booster used in skincare products to help retain moisture and improve product stability. It also enhances the penetration of other active ingredients into the skin.
Benefits
- Helps skin retain moisture
- Improves product texture and spreadability
- Enhances effectiveness of preservative systems
Potential concerns
- May cause mild irritation or redness in sensitive individuals (occurs in roughly 3% of eczema-prone skin)
- Potential for delayed allergic contact reactions in susceptible people, though this is uncommon
- Less irritating than propylene glycol under occlusion, but still worth avoiding if you have known sensitivities to glycols
Science: A 1989 study found hexylene glycol caused visible skin reactions in 2.8% of eczema patients at high concentrations (30-50%), with potential for delayed allergic sensitization in rare cases. It was less irritating than propylene glycol. One case report mentions hexylene glycol as a potential allergen in medical formulations, though reactions are uncommon at typical cosmetic concentrations.
Analyze Ingredient Further→ -
Disodium EDTA is a chelating agent that binds to metals and minerals in skincare formulations, helping to preserve product stability and extend shelf life. It's used in small amounts (typically under 2%) to prevent unwanted chemical reactions that could degrade the formula.
Benefits
- Stabilizes cosmetic formulations by binding trace metals
- Extends product shelf life and maintains efficacy
- Allows other skincare ingredients to work more effectively
Potential concerns
- May increase skin penetration of other ingredients by chelating calcium in the skin barrier—only a concern if combined with potentially harmful substances
- Not absorbed through skin in normal use, but inhalation from sprays was identified as a theoretical concern in safety assessments
Science: The Cosmetic Ingredient Review Expert Panel confirmed safety in 2023 based on standard use concentrations. Clinical studies show no skin absorption; however, it can affect how other chemicals penetrate the skin, so formulators must account for this when combining with other actives.
Analyze Ingredient Further→ -
Sodium benzoate is a preservative used in skincare products to prevent bacterial and fungal growth, extending shelf life. It's a salt derived from benzoic acid and is one of the most widely used preservatives in cosmetics, skincare, and food products.
Benefits
- Prevents microbial contamination and extends product shelf life
- Generally effective at low concentrations (0.1-0.5%)
- Approved for cosmetic use by major regulatory bodies
Potential concerns
- Can cause allergic contact dermatitis in sensitive individuals; identified as an allergen in medical hand cleansers
- Recent research suggests long-term oral intake may affect bone health and increase osteoporosis risk, though topical skincare exposure is minimal
Science: Sodium benzoate is well-established as a safe preservative in cosmetics at typical use levels. However, emerging research indicates that chronic systemic intake may interfere with bone metabolism through the FGF2/p38/RUNX2 pathway. For topical skincare use, the exposure and absorption are minimal compared to dietary intake, but individuals with known sensitivities should avoid it.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Sodium chloride is common table salt, used in skincare products as a texture modifier, preservative, and to help balance formulations. In small amounts, it's generally well-tolerated by skin.
Benefits
- Helps preserve product stability
- Can enhance skin hydration when used in appropriate concentrations
- Improves product texture and consistency
Potential concerns
- High concentrations may irritate sensitive or compromised skin
- Excessive topical salt exposure can potentially disrupt skin barrier function
- May cause dryness or tightness in some individuals
Science: Sodium chloride is a naturally occurring electrolyte essential to skin physiology. Research indicates the skin actively regulates sodium levels through complex mechanisms involving the endothelium, immune cells, and lymphatics; however, peer-reviewed data specifically addressing topical sodium chloride in cosmetic formulations at typical use levels is limited.
Analyze Ingredient Further→ -
Aloe Barbadensis Leaf Juice is the clear gel extracted from the inner part of the aloe vera leaf. In skincare, it functions as a skin-conditioning agent known for its soothing and hydrating properties, and is typically used at low concentrations (usually under 1%).
Benefits
- Soothing and anti-inflammatory properties
- Hydrating and skin-conditioning
- Antimicrobial and wound-healing support
Potential concerns
- Whole leaf aloe (including latex) contains anthraquinones that can cause photosensitivity and irritation; reputable products use only the inner gel
- High oral doses in animal studies showed reproductive toxicity and developmental effects; topical use in cosmetics at low concentrations is considered safe
- Potential for allergic contact dermatitis in sensitive individuals
Science: A 2007 safety review by the Cosmetic Ingredient Review panel concluded aloe-derived ingredients are safe for cosmetic use when the phototoxic anthraquinone content is limited to 50 ppm or lower and concentrations remain at 1% or less. The inner gel (polysaccharides) is well-tolerated topically, though oral studies at high doses showed concerns unrelated to typical skincare application.
Analyze Ingredient Further→ -
Cocamidopropyl hydroxysultaine is a mild, plant-derived surfactant (cleansing agent) made from coconut oil. It gently cleanses the skin while also helping to condition it and reduce static, making it a versatile ingredient in cleansers and shampoos.
Benefits
- Gentle cleansing without stripping
- Conditioning properties
- Reduces frizz and static
Potential concerns
- May cause contact dermatitis in sensitive individuals
- Potential for irritation at high concentrations
Science: A 2024 expert safety assessment by the Cosmetic Ingredient Review Panel concluded that alkyl sultaines (including this ingredient) are safe in cosmetics at current use levels and concentrations. However, isolated cases of contact dermatitis have been reported in susceptible individuals.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
PEG-120 Methyl Glucose Dioleate is a gentle emulsifier and surfactant derived from glucose (a natural sugar) combined with plant oils. It helps mix water and oil-based ingredients together in skincare products, creating smooth, stable formulations while also providing mild cleansing properties.
Benefits
- Helps create stable, well-blended skincare formulas
- Mild cleansing action suitable for sensitive skin
- Derived from natural sources (glucose and plant oils)
Potential concerns
- May cause irritation in individuals with very sensitive skin when used in high concentrations
- Some people may react to PEG-based ingredients, though this one is considered mild
Science: Limited peer-reviewed data available for this specific ingredient. It belongs to the well-established class of PEG esters and glucose-derived surfactants, which are generally recognized as safe in cosmetic formulations at typical use levels.
Analyze Ingredient Further→ -
Sodium Laureth Sulfate (SLES) is a cleansing agent that helps remove oil and dirt from skin and hair. It's a mild surfactant commonly used in shampoos, body washes, and facial cleansers to create lather and improve product effectiveness.
Benefits
- Effective at removing oils and impurities
- Creates satisfying lather in cleansing products
- Milder than some alternative surfactants
Potential concerns
- Can be drying or irritating to sensitive skin with prolonged contact
- May cause contact dermatitis in individuals with sensitive skin
- Higher occupational exposure risk for hairdressers; consumer exposure generally considered acceptable
Science: Limited peer-reviewed data specifically addresses SLES safety in consumer skincare products. A systematic review of hair cosmetic ingredients noted that while current safety standards consider typical consumer exposure acceptable, the irritant potential of surfactants like SLES warrants attention in sensitive populations. Research confirms SLES is effective at cleansing, though individual sensitivity varies.
Analyze Ingredient Further→ -
Lauramidopropyl betaine is a mild, plant-derived surfactant (cleaning agent) commonly used in cleansers and shampoos. It helps remove oil and dirt from skin while maintaining a gentle, non-irritating formula.
Benefits
- Gentle cleansing without stripping skin
- Reduces irritation compared to harsher surfactants
- Helps stabilize and thicken formulations
- Mild enough for sensitive skin types
Potential concerns
- May cause irritation in very sensitive individuals at high concentrations
- Can occasionally trigger reactions in those with surfactant sensitivities
Science: Research confirms lauramidopropyl betaine is a zwitterionic (amphoteric) surfactant with mild properties suitable for cosmetic formulations. Studies demonstrate it effectively disperses in water-based systems and maintains stability across various solvent mixtures, supporting its use in rinse-off products where irritation risk is minimal.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Polyquaternium-7 is a synthetic polymer that acts as a conditioning and film-forming agent in skincare products. It helps improve the texture and spreadability of creams and lotions while providing a light protective layer on the skin.
Benefits
- Improves product texture and makes formulas easier to apply
- Provides light conditioning properties
- Helps stabilize emulsions (creams and lotions)
Science: Research shows Polyquaternium-7 is a well-tolerated synthetic cationic polymer used in cosmetic formulations. It has been evaluated in clinical studies, including a six-month safety trial for topical use, with no significant adverse events reported. Limited published dermatological irritation data exists, but its established use in regulated cosmetics suggests a good safety profile.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Sodium sulfate is a mineral salt commonly used in skincare products as a thickening agent, emulsifier, and texture modifier. It helps give products a pleasant consistency and stability but does not directly treat or benefit the skin.
Potential concerns
- May cause dryness or irritation in sensitive individuals
- Can disrupt skin barrier if used in high concentrations
- May cause mild irritation in products formulated at elevated concentrations
Science: Limited peer-reviewed data available for sodium sulfate as a cosmetic skincare ingredient. The provided research focuses on dextran sodium sulfate as a disease-inducing agent in animal models, not on topical cosmetic safety or efficacy.
Analyze Ingredient Further→
Edit this product
Edit Ingredients