Ingredients
-
Analysis not yet available for this ingredient.
-
Butylene glycol is a humectant—a type of ingredient that draws water into the skin and helps it stay hydrated. It's a small, lightweight molecule commonly used in moisturizers to improve hydration without leaving a heavy feel on the skin.
Benefits
- Increases skin hydration and moisture retention
- Lightweight and absorbs quickly
- Helps other active ingredients penetrate the skin more effectively
Science: Research demonstrates that butylene glycol, when combined with other humectants (like glycerin and hyaluronic acid) and occlusive ingredients in moisturizers, significantly improves skin hydration in both healthy skin and compromised skin conditions such as atopic dermatitis. It is recognized as a safe, effective humectant in dermatological formulations.
Analyze Ingredient Further→ -
Tocopheryl acetate is a stable form of vitamin E, a fat-soluble antioxidant that helps protect skin from damage caused by free radicals and oxidative stress. It's commonly used in skincare products because it's more shelf-stable than other vitamin E forms and may help support the skin's natural barrier function.
Benefits
- Antioxidant protection against environmental damage
- Supports skin barrier health
- Stable ingredient with good shelf life in formulations
Science: Tocopheryl acetate is a well-established vitamin E ester that the body converts to free vitamin E for use. Research shows it functions as a lipid-soluble antioxidant; one recent study found it contributed to a moisturizer's beneficial effects on skin microbiota balance in atopic dermatitis models, though more direct clinical evidence on topical efficacy is limited.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Diisostearyl Malate is an emollient and texture-enhancing ingredient derived from malic acid and isostearyl alcohol. It's used in cosmetics to create a smooth, silky feel and improve product spreadability on skin.
Benefits
- Creates a smooth, silky texture in formulations
- Helps improve product spreadability and application
- Provides emollient properties for skin conditioning
Potential concerns
- Potential for contact dermatitis in sensitive individuals, particularly linked to trace impurities (isostearyl alcohol) rather than the ingredient itself
- May cause lip irritation in lip care products in susceptible people
Science: A 1987 case study documented contact dermatitis from this ingredient in lipstick, though the reaction was traced to specific impurities (isostearyl alcohol) present in the material rather than the pure ingredient itself. Limited additional peer-reviewed safety data is available for this ingredient.
Analyze Ingredient Further→ -
Titanium dioxide is a naturally occurring mineral that works as a physical UV filter and opacifying agent in skincare products. It sits on the skin's surface and reflects and scatters UV rays to provide broad-spectrum sun protection, and is also commonly used in foundations and powders to create coverage and a matte finish.
Benefits
- Provides broad-spectrum UVA and UVB protection
- Physical (non-chemical) sun filter suitable for sensitive skin
- Helps create opaque, matte finishes in makeup and tinted products
Potential concerns
- May leave a white cast on darker skin tones due to its opacity
- Can feel slightly heavy or occlusive on very oily skin types
- Rarely, inhalation of airborne powder particles may be a concern in occupational settings, though not in typical consumer use
Science: Titanium dioxide has a long history of safe use in cosmetics and is approved by the FDA, EU, and other major regulatory bodies as a sunscreen active ingredient. It is considered non-toxic and non-penetrating when applied topically in skincare products.
Analyze Ingredient Further→ -
2-Hexanediol is a humectant and preservative booster commonly used in skincare products to help retain moisture and extend shelf life. It works by drawing water into the skin while also enhancing the effectiveness of other preservatives, allowing brands to use lower amounts of traditional preservatives.
Benefits
- Hydrates and moisturizes skin by drawing in water
- Helps preserve products with lower preservative levels
- Works synergistically with other skincare ingredients like niacinamide
Potential concerns
- May cause cell viability concerns at concentrations above 1.0% in laboratory studies
- Limited real-world safety data in humans at typical skincare concentrations (usually 2-5%)
- Potential environmental concern if released into water systems
Science: While 2-hexanediol is widely used as a preservative substitute for parabens, recent cytotoxicity studies raise questions about safety at concentrations commonly found in skincare products (>2%). However, these findings are from laboratory cell studies and may not directly translate to human skin application. Further human safety studies are needed to confirm real-world risk.
Analyze Ingredient Further→ -
Silica Silylate is a silica-derived ingredient that acts as a texture modifier and absorbent in skincare formulations. It helps create a smooth, matte finish and can absorb excess oil and moisture, making it popular in primers, powders, and lightweight creams.
Benefits
- Creates a smooth, refined skin appearance
- Helps absorb excess oil and sebum
- Provides a matte or velvet-like finish
Science: Limited peer-reviewed data available for this ingredient. It is derived from silica, a widely-used and generally recognized as safe cosmetic material, though specific safety studies on the silylated form are not readily available in published literature.
Analyze Ingredient Further→ -
Silica Dimethyl Silylate is a silicone-based powder derived from silica (a mineral) that's been chemically modified. In skincare, it works as a texture enhancer and absorbent, helping products feel smoother on skin and reducing shine by absorbing excess oils.
Benefits
- Smooths product texture and application
- Absorbs excess oil and reduces shine
- Improves powder-based product performance
Science: Limited peer-reviewed data available for this ingredient. It is structurally related to commonly used silicones in cosmetics, which have a long safety history, though specific safety studies on this particular derivative are not widely published.
Analyze Ingredient Further→ -
Polybutene is a synthetic polymer derived from petroleum that acts as a thickener, binder, and emollient in skincare products. It helps create a smooth texture and forms a protective layer on the skin without dissolving in water.
Benefits
- Improves product texture and spreadability
- Creates a protective, conditioning layer on skin
- Helps bind ingredients together in formulations
Science: The Cosmetic Ingredient Review Expert Panel concluded that Polyisobutene and Hydrogenated Polyisobutene are safe as used in cosmetics based on extensive toxicity testing, including 2-year chronic studies, reproductive studies, and clinical patch tests showing no dermal irritation, sensitization, or ocular irritation. The ingredient's extremely low water solubility and high oil-water partition coefficient indicate minimal skin absorption and systemic exposure.
Analyze Ingredient Further→ -
Petrolatum, commonly known as petroleum jelly, is a mineral-based occlusive moisturizer derived from petroleum. It forms a protective barrier on the skin's surface to lock in moisture and prevent water loss, making it effective for dry and sensitive skin.
Benefits
- Creates a strong moisture barrier to prevent water loss from skin
- Helps heal and protect damaged or irritated skin
- Non-irritating and hypoallergenic for most people, including sensitive skin types
- Safe to use around eyes and on delicate areas
Potential concerns
- Has a thick, greasy texture that some people find uncomfortable
- May feel heavy on oily or acne-prone skin
- Does not actively hydrate skin—it seals in existing moisture rather than adding water
Science: Recent dermatological research confirms petrolatum is highly safe with an excellent safety profile. Common myths about it causing acne or flammability have been scientifically dispelled. It is widely used in clinical dermatology as a vehicle for medicated treatments and wound care, with virtually no allergenic or comedogenic concerns for typical use.
Analyze Ingredient Further→ -
Polyethylene is a synthetic plastic polymer used in skincare products as a thickening agent, emollient, and texture modifier. It creates a smooth, spreadable consistency and helps bind ingredients together in formulations.
Benefits
- Creates smooth, pleasant texture in creams and lotions
- Helps stabilize and thicken product formulations
- Provides a protective barrier on skin surface
Potential concerns
- Poor biodegradability — persists in the environment and may accumulate over time
- Not derived from renewable sources, contributing to plastic waste
- Microplastic concern if used in products that wash down drains
Science: Research indicates polyethylene shows poor environmental biodegradability and does not meet emerging sustainability criteria for topical skincare products. While safe for skin contact, dermatological literature increasingly recommends plant-based alternatives (such as plant waxes and biopolymers) to reduce environmental impact.
Analyze Ingredient Further→ -
Fragrance is a blend of aromatic compounds added to skincare products to create a pleasant scent. It serves no therapeutic benefit to your skin and is purely for sensory appeal.
Benefits
- Improves user experience through pleasant scent
- Can enhance the perception of product quality
Potential concerns
- May cause irritation or allergic reactions, especially in sensitive skin
- Can trigger contact dermatitis or sensitization with repeated exposure
- Fragrance is a common allergen and a leading cause of cosmetic-related skin reactions
Science: Fragrance is a known contact allergen and irritant for a subset of the population. Those with sensitive skin, eczema, or fragrance sensitivity should avoid fragranced products. The specific allergens vary depending on which aromatic compounds are used in the fragrance blend.
Analyze Ingredient Further→ -
Dehydroacetic acid is a preservative used in skincare products to prevent bacterial and fungal growth, helping extend shelf life and maintain product safety. It's been used in cosmetics for decades and works by inhibiting microbial activity.
Benefits
- Prevents bacterial and fungal contamination in products
- Extends product shelf life
- Allows products to remain safe and effective over time
Potential concerns
- May cause sensitivity or irritation in individuals with fragrance or preservative sensitivities
- Can interact with other preservatives in formulations, potentially reducing effectiveness
Science: The Cosmetic Ingredient Review Expert Panel has repeatedly affirmed the safety of dehydroacetic acid when used at current concentrations and practices, most recently in 2024 after reviewing updated safety data. The ingredient has been assessed as safe in cosmetics since 1985 with consistent reaffirmation in subsequent reviews.
Analyze Ingredient Further→ -
Ceramide 3 is a naturally occurring lipid found in your skin's outer barrier that helps lock in moisture and protect against irritants. It's used in skincare products to restore and strengthen this protective barrier, particularly in formulations designed for sensitive or compromised skin.
Benefits
- Strengthens the skin barrier to reduce water loss and dehydration
- May help reduce symptoms of eczema and other barrier-disruption conditions
- Supports skin's natural protective function against environmental stressors
Potential concerns
- Low solubility and penetration ability limit effectiveness in standard formulations — absorption can be improved through specialized delivery systems
- Individual sensitivity possible, though rare
Science: Research suggests Ceramide 3 plays a role in atopic dermatitis pathogenesis and is one of three critical lipids in the skin barrier alongside ceramide 1 and cholesterol. Recent studies show that specialized delivery systems (like transethosomes) may improve Ceramide 3's skin penetration and effectiveness in treating barrier-compromised conditions.
Analyze Ingredient Further→ -
Yellow 5 Lake is a synthetic colorant used to give skincare products a yellow or golden hue. It's the insoluble form of Yellow 5 (Tartrazine), made by binding the dye to an inert mineral base so it doesn't dissolve in water. It serves purely cosmetic purposes—to make the product visually appealing—and has no active skincare benefits.
Potential concerns
- May trigger allergic reactions or sensitivity in people with tartrazine sensitivity (estimated 0.1-0.2% of population)
- Can cause itching, hives, or contact dermatitis in susceptible individuals
- Potential concern for people with aspirin sensitivity, as tartrazine may cross-react
Science: Yellow 5 Lake is approved by the FDA and EU as a cosmetic colorant and has a long history of use with a strong safety profile in the general population. Limited peer-reviewed data exists specifically for Yellow 5 Lake in skincare, but it is considered a low-risk ingredient for most users when used as a colorant.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients