Ingredients
-
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Aloe Barbadensis Leaf Extract is a concentrated extract derived from the inner gel of the aloe vera plant leaf. It's used in skincare products as a skin-conditioning agent to help soothe and hydrate the skin.
Benefits
- Soothing and anti-inflammatory properties
- Skin hydration and moisture retention
- Antimicrobial and antiviral activity
Potential concerns
- Products must contain less than 50 ppm anthraquinones (bitter yellow compounds from the leaf) to avoid phototoxicity and irritation
- High oral doses in animal studies showed reproductive toxicity and developmental effects; topical exposure at cosmetic concentrations is considered safe when properly purified
- Potential skin irritation in sensitive individuals, particularly if anthraquinone content is not properly controlled
Science: The Cosmetic Ingredient Review Expert Panel assessed aloe-derived ingredients as safe in cosmetics when used at low concentrations (≤0.1%) with anthraquinone levels controlled below 50 ppm. Safety concerns primarily relate to oral ingestion and high-dose exposure; topical application in properly formulated products shows a good safety profile.
Analyze Ingredient Further→ -
Potassium sorbate is a preservative used in skincare products to prevent the growth of mold, yeast, and some bacteria, helping extend shelf life. It's a salt derived from sorbic acid and is commonly used as a gentler alternative to stronger chemical preservatives.
Benefits
- Prevents microbial contamination and mold growth
- Generally considered milder than some other preservatives like benzalkonium chloride
- Allows products to remain effective longer without refrigeration
Potential concerns
- May cause irritation or allergic contact dermatitis in sensitive individuals
- Not suitable for preservative-free formulations
- Limited effectiveness against some bacteria compared to stronger preservatives
Science: Clinical research suggests potassium sorbate is less damaging to delicate tissues than benzalkonium chloride, making it a preferred alternative preservative in sensitive applications like eye products. However, peer-reviewed safety data specific to topical skincare use in the general population is limited.
Analyze Ingredient Further→ -
Sodium benzoate is a preservative used in skincare products to prevent bacterial and fungal growth, extending shelf life. It's a salt derived from benzoic acid and is one of the most widely used preservatives in cosmetics, skincare, and food products.
Benefits
- Prevents microbial contamination and extends product shelf life
- Generally effective at low concentrations (0.1-0.5%)
- Approved for cosmetic use by major regulatory bodies
Potential concerns
- Can cause allergic contact dermatitis in sensitive individuals; identified as an allergen in medical hand cleansers
- Recent research suggests long-term oral intake may affect bone health and increase osteoporosis risk, though topical skincare exposure is minimal
Science: Sodium benzoate is well-established as a safe preservative in cosmetics at typical use levels. However, emerging research indicates that chronic systemic intake may interfere with bone metabolism through the FGF2/p38/RUNX2 pathway. For topical skincare use, the exposure and absorption are minimal compared to dietary intake, but individuals with known sensitivities should avoid it.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Ethylhexylglycerin is a preservative and antimicrobial ingredient used to prevent bacterial growth and extend shelf life in skincare products. It's a multifunctional ingredient that helps keep formulations stable and free from contamination.
Benefits
- Prevents bacterial contamination in products
- Helps extend product shelf life
- Works synergistically with other preservatives for enhanced protection
Potential concerns
- May not be effective against all bacterial species (notably some Pseudomonas aeruginosa strains)
- Preservative-related sensitization possible in sensitive individuals, though uncommon
Science: Research shows ethylhexylglycerin has broad antimicrobial activity against many common cosmetic contaminants, though effectiveness varies by bacterial species. Studies demonstrate it can work synergistically with other preservative components to enhance biofilm inhibition.
Analyze Ingredient Further→ -
Caprylic/Capric Triglyceride is a lightweight oil derived from coconut that acts as an emollient and helps formulations blend smoothly. It softens skin and reduces water loss by creating an occlusive barrier on the skin's surface.
Benefits
- Improves skin hydration and reduces transepidermal water loss (TEWL)
- Lightweight, non-greasy feel compared to heavier oils
- Helps deliver other active ingredients deeper into the skin
- Smooth, silky texture in skincare formulations
Science: Research shows that emulsions containing 15% caprylic/capric triglyceride significantly increase skin hydration and reduce water loss in healthy subjects. The ingredient is also used as an effective carrier oil in nanoemulsions to enhance penetration of active compounds into skin.
Analyze Ingredient Further→ -
Lactic acid is a mild chemical exfoliant that works by gently dissolving the bonds between dead skin cells on the surface, helping to slough them away. It's an alpha hydroxy acid (AHA) derived from milk fermentation and is gentler than stronger exfoliants, making it suitable for sensitive skin types.
Benefits
- Gently exfoliates dead skin cells for a smoother texture
- Improves skin radiance and brightness
- Helps reduce the appearance of fine lines and uneven skin tone
- Supports skin hydration by improving moisture absorption
Potential concerns
- Can cause redness, stinging, or irritation, especially at higher concentrations or on sensitive skin
- Increases sun sensitivity — daily SPF is essential when using
- May irritate active acne or compromised skin barrier
- Can cause dryness if overused or not followed with adequate moisturizer
Science: Lactic acid is widely recognized as an effective gentle exfoliant for improving skin texture and hydration. It has a longer history of safe topical use in dermatology compared to stronger AHAs, though it requires proper formulation (typically 5-12% for leave-on products) and concurrent sun protection to minimize irritation risk.
Analyze Ingredient Further→ -
Sodium Hydroxide is a strong alkaline chemical used in skincare products primarily as a pH buffer to neutralize acids and adjust the product's pH to safe levels for skin. It is not an active skincare ingredient and appears only in trace amounts in finished products.
Potential concerns
- In concentrated form, sodium hydroxide is caustic and can cause severe chemical burns; however, in cosmetic products it is diluted and pH-buffered to safe levels
- Undiluted or highly concentrated sodium hydroxide should never contact skin directly
Science: The provided research discusses sodium hydroxide only in a specialized medical context (10% solution for surgical cauterization of ingrown toenails), which is not relevant to cosmetic skincare use. In properly formulated skincare products, sodium hydroxide is used in minimal concentrations solely for pH adjustment and is considered safe by regulatory bodies including the FDA and EU.
Analyze Ingredient Further→ -
Xanthan gum is a natural thickener derived from fermented bacteria that helps give skincare products a smooth, gel-like texture. It stabilizes formulas and prevents ingredients from separating, while also helping products spread evenly on skin.
Benefits
- Creates smooth, pleasant texture
- Stabilizes emulsions and prevents separation
- Improves product spreadability and application
Science: Xanthan gum is an FDA-approved, anionic polysaccharide with a long history of safe use across food, pharmaceutical, and cosmetic industries since 1969. Its performance as a thickener and stabilizer is well-established in scientific literature, with no notable skin irritation concerns reported.
Analyze Ingredient Further→ -
Propylene glycol is a lightweight humectant and solvent commonly used in skincare formulations. It helps draw moisture into the skin and improves the texture and spreadability of products.
Benefits
- Hydrates skin by attracting and retaining moisture
- Enhances product texture and makes formulas easier to apply
- Helps active ingredients penetrate the skin more effectively
- Improves stability and shelf life of formulations
Potential concerns
- May cause contact dermatitis or irritation in sensitive individuals
- Can occasionally trigger allergic reactions in susceptible people
- High concentrations may feel sticky or heavy on some skin types
Science: Research confirms propylene glycol acts as a penetration enhancer in topical formulations, improving skin uptake of active ingredients. The ingredient is widely studied and considered safe at typical cosmetic concentrations, though individual sensitivity varies.
Analyze Ingredient Further→ -
Disodium EDTA is a chelating agent that binds to metals and minerals in skincare formulations. It helps stabilize products, prevent discoloration, and improve texture by controlling how other ingredients behave in the formula.
Benefits
- Stabilizes skincare formulations and extends shelf life
- Prevents oxidation and discoloration of products
- Improves product texture and consistency
Potential concerns
- May increase skin penetration of other ingredients in the formula
- Not absorbed through skin under normal use, but inhalation from sprays should be minimized
- Can cause irritation at high concentrations, though typical use levels (under 2%) are considered safe
Science: The Cosmetic Ingredient Review Expert Panel confirmed in 2023 that disodium EDTA is safe at typical cosmetic use concentrations (under 2%). Research shows it is not absorbed through intact skin, though it may affect how other ingredients penetrate skin due to its mineral-binding properties. No carcinogenic effects have been identified.
Analyze Ingredient Further→ -
This is a synthetic polymer that acts as a thickener and film-former in skincare products. It helps create a smooth texture, improve product consistency, and can form a light protective layer on the skin's surface to help retain moisture.
Benefits
- Improves product texture and spreadability
- Helps retain moisture on skin
- Creates a smooth, even application
Science: Limited peer-reviewed data available for this ingredient. It is used widely in cosmetics as a safe thickening and film-forming agent, with no significant safety concerns reported in cosmetic safety databases.
Analyze Ingredient Further→ -
Ascorbic acid is vitamin C in its purest, most potent form. It works as a powerful antioxidant that neutralizes free radical damage from sun exposure and environmental stress, and also supports your skin's natural collagen production to improve texture and firmness.
Benefits
- Protects skin from free radical damage caused by UV rays and pollution
- Improves skin texture and reduces the appearance of fine lines and wrinkles
- Brightens skin and may help fade age spots and uneven tone
- Supports collagen production for firmer, more resilient skin
Potential concerns
- Can be irritating, especially for sensitive skin, due to its low pH (works best below pH 3.5)
- Unstable and degrades quickly when exposed to light, heat, or air — products may lose effectiveness over time
- May cause redness, stinging, or dryness if used too frequently or in high concentrations
- Requires specific formulation to penetrate skin effectively; poorly formulated products may not deliver promised benefits
Science: Research shows L-ascorbic acid must be formulated at pH below 3.5 and at 5–20% concentration to effectively penetrate skin. A clinical trial demonstrated that 5% vitamin C cream significantly improved photoaged skin texture, reduced wrinkles, and promoted elastic tissue repair over 6 months. However, effectiveness is highly dependent on formulation quality and product stability.
Analyze Ingredient Further→ -
Maltodextrin is a carbohydrate derived from starches like corn or potato. In skincare, it's used as a filler, thickener, and texture agent — it has no direct active benefit for skin itself.
Science: Maltodextrin is an inert, non-toxic carbohydrate commonly used as a placebo control in clinical nutrition studies, indicating excellent safety and tolerability. No adverse effects on skin health or systemic absorption concerns have been documented.
Analyze Ingredient Further→ -
Jojoba seed oil is a natural oil extracted from jojoba plant seeds that closely mimics the skin's natural sebum. It's commonly used in skincare to moisturize, balance oil production, and improve skin texture without leaving a heavy residue.
Benefits
- Lightweight moisturization
- Helps balance oily and dry skin
- Rich in vitamin E and antioxidants
- Generally non-comedogenic (unlikely to clog pores)
Potential concerns
- Rare allergic reactions in sensitive individuals
- May not be suitable for very acne-prone skin in high concentrations
Science: Jojoba oil has a long history of safe use in cosmetics and is well-tolerated by most skin types. Limited peer-reviewed data available for this specific ingredient, but extensive industry experience and anecdotal evidence support its safety and efficacy as a natural moisturizer.
Analyze Ingredient Further→ -
Chamomile flower extract is a plant-derived ingredient made from the dried flowers of German chamomile (Matricaria chamomilla). It's commonly used in skincare for its soothing and anti-inflammatory properties, making it popular in products designed to calm irritated or sensitive skin.
Benefits
- Soothes and calms irritated or inflamed skin
- May help reduce redness and sensitivity
- Antioxidant properties that help protect skin from environmental stress
Potential concerns
- Rare allergic reactions, particularly in people sensitive to plants in the daisy family (ragweed, chrysanthemums)
- May cause contact dermatitis in sensitive individuals
Science: Chamomile has been traditionally used for centuries and is well-documented in herbal medicine literature. While robust clinical studies on skincare formulations are limited, the ingredient has established anti-inflammatory and antioxidant properties supported by phytochemical research.
Analyze Ingredient Further→ -
Water is the primary ingredient in most skincare products, serving as a base that dissolves and carries other active ingredients. It hydrates the skin surface and helps other beneficial compounds penetrate effectively.
Benefits
- Hydrates and plumps the skin
- Helps deliver other skincare ingredients
- Essential solvent for product formulation
Science: Water is a fundamental component of skin physiology and cosmetic formulations. No safety concerns exist for topical application; it is non-irritating and universally safe for all skin types.
Analyze Ingredient Further→ -
Dihydroxyacetone (DHA) is a 3-carbon sugar approved by the FDA as a color additive for sunless tanning products. When applied to skin, it reacts with proteins in the outer layer to produce a temporary brown tan-like color that develops over a few hours.
Benefits
- Creates a tan appearance without sun exposure
- Temporary effect that washes off with soap and water
- Allows customization of tan depth depending on product concentration
Potential concerns
- Should not contact eyes, lips, or mucous membranes
- Inhalation of spray-tan mist is not FDA-approved and should be avoided
- May cause streaking or uneven coloring if not applied evenly
Science: DHA has been used safely in topical tanning products since the 1960s. It works by binding to free amino groups in skin proteins, particularly arginine, to create the brown color. Current research suggests DHA staining may have diagnostic applications in dermatology for identifying skin lesions.
Analyze Ingredient Further→ -
Erythrulose is a naturally derived sugar that works as a self-tanning agent. Like DHA (dihydroxyacetone), it reacts with amino acids in your skin to create a brown color, but it typically develops more slowly and may last slightly longer than DHA alone.
Benefits
- Creates a gradual, natural-looking tan without sun exposure
- Often used alongside DHA to extend tan duration and improve color evenness
- Generally well-tolerated with low irritation potential
- Semi-permanent color that fades as skin naturally sheds dead cells
Potential concerns
- May cause contact dermatitis or allergic reactions in sensitive individuals
- Can cause unwanted pigmentary changes or streaking if not applied evenly
- Provides no UV protection—sunscreen use is still essential
Science: Erythrulose is used in approximately 38% of commercial self-tanning products, typically combined with DHA. It works through the same Maillard reaction mechanism as DHA, producing brown pigments (melanoidins) that deposit in the outer skin layer. Clinical data on adverse effects show self-tanners overall have a low incidence of skin reactions (roughly 2%), though contact dermatitis remains a possible concern in susceptible individuals.
Analyze Ingredient Further→ -
Cetearyl Olivate is a natural emulsifier and skin-conditioning agent derived from olive oil. It helps blend oil and water-based ingredients together in skincare products while leaving skin feeling soft and moisturized.
Benefits
- Helps create smooth, stable product texture
- Provides light moisturizing properties
- Derived from natural olive oil
Science: Limited peer-reviewed data available for this ingredient. Cetearyl Olivate is widely used in cosmetics as a safe, naturally-derived emulsifier with a strong safety history in consumer skincare products.
Analyze Ingredient Further→ -
Sorbitan Olivate is an emulsifier derived from sorbitol (a natural sugar alcohol) and olive oil fatty acids. It helps mix oil and water-based ingredients together in skincare formulations, creating stable, smooth products.
Benefits
- Stabilizes product texture and prevents separation of oils and water
- Derived from natural olive oil, aligning with plant-based ingredient preferences
- Allows for creation of lighter, more elegant formulations
Potential concerns
- Generally mild skin irritant in some individuals; minimal irritation in most clinical studies
- Rare allergic contact dermatitis reported in fewer than 1% of sensitive individuals
- May cause greater irritation when combined with fragrance components
Science: The Cosmetic Ingredient Review Expert Panel concluded Sorbitan Olivate is safe for cosmetic use at concentrations typically below 10%. Clinical studies show it is generally a minimal to mild skin irritant and nonsensitizing in the general population, though rare allergic reactions have been documented in individuals with contact dermatitis.
Analyze Ingredient Further→ -
Sodium metabisulfite is a preservative and antioxidant used in skincare to prevent product spoilage and oxidation. It helps extend shelf life by protecting formulations from degradation caused by air and light exposure.
Benefits
- Preserves product stability and extends shelf life
- Prevents oxidation of other ingredients
- Approved for cosmetic use at standard concentrations
Potential concerns
- May cause irritation or allergic reactions in sensitive individuals, particularly those with sulfite sensitivities
- Can trigger reactions in people with asthma or sulfite allergies
- Not typically recommended for products applied to sensitive facial skin
Science: The Cosmetic Ingredient Review Expert Panel confirmed sodium metabisulfite is safe in cosmetic formulations at typical use concentrations (2023). However, research indicates it can affect cellular ion channels at higher concentrations; safety depends on the low levels used in skincare products.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients