Ingredients
-
Analysis not yet available for this ingredient.
-
Dimethicone is a silicone-based ingredient that forms a smooth, protective layer on your skin. It helps lock in moisture, creates a soft feel, and is commonly used in moisturizers and primers to improve product texture and skin hydration.
Benefits
- Improves skin hydration by creating a moisture-barrier layer
- Provides a smooth, silky feel to products and on skin
- Well-tolerated by sensitive and atopic (eczema-prone) skin
- Non-greasy alternative to heavier oils
Science: Clinical studies demonstrate dimethicone is safe and well-tolerated in children with atopic dermatitis from 12 months of age. Research shows moisturizers containing dimethicone effectively improve skin hydration in mild-to-moderate atopic dermatitis patients over 14 days.
Analyze Ingredient Further→ -
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Drometrizole trisiloxane is a UV filter used in sunscreens to protect skin from harmful ultraviolet radiation. It's a newer chemical sunscreen ingredient that offers broad-spectrum protection and is widely used in international markets, though not yet approved in the U.S.
Benefits
- Provides broad-spectrum UV protection against UVA and UVB rays
- More photostable than some older UV filters, maintaining effectiveness longer
- Newer alternative to older chemical sunscreen ingredients with potentially better safety profiles
Potential concerns
- Allergic contact dermatitis has been reported in some individuals
- May cross-react with sensitivities to other sunscreen chemicals
- Not yet FDA-approved in the U.S., so long-term safety data in American populations is limited
Science: Drometrizole trisiloxane is used internationally and has demonstrated favorable safety and efficacy profiles in global markets. However, documented cases of allergic contact dermatitis exist in the scientific literature, indicating it may not be suitable for all skin types. As a newer filter, it has less extensive long-term safety data compared to established UV filters like zinc oxide or titanium dioxide.
Analyze Ingredient Further→ -
Sodium hyaluronate is the salt form of hyaluronic acid, a naturally occurring substance found in your skin that acts like a moisture magnet. In skincare products, it absorbs water from the environment and binds it to your skin, helping to hydrate and plump the skin's surface.
Benefits
- Delivers intense hydration to the skin
- Helps reduce the appearance of fine lines by improving skin moisture
- Supports skin barrier function
- Suitable for all skin types, including sensitive and oily skin
Potential concerns
- In very dry climates with low humidity, it may draw moisture from deeper skin layers if not sealed with an occlusive product
- Rare allergic reactions are possible but extremely uncommon
Science: While the provided research focuses on intra-articular injections for joint health (showing good safety and efficacy), hyaluronic acid and its salt form are well-established in dermatology for topical hydration. The molecule's safety profile is well-documented across decades of use in medical and cosmetic applications, with severe adverse reactions being extremely rare.
Analyze Ingredient Further→ -
Caprylyl glycol is a preservative and skin-conditioning ingredient derived from coconut oil. It helps prevent bacterial and mold growth in skincare products while also providing mild hydrating and humectant benefits to the skin.
Benefits
- Helps preserve product freshness and prevent contamination
- Provides gentle humectant properties to help retain skin moisture
- Often used as a gentler alternative to traditional preservatives
Potential concerns
- Rare cases of allergic contact dermatitis have been reported in sensitive individuals
- May cause irritation in those with known sensitivity to glycols
Science: A 200-subject repeat patch test study found no delayed hypersensitivity reactions to caprylyl glycol at typical use concentrations. However, isolated case reports of allergic contact dermatitis exist, suggesting it can act as an allergen in susceptible individuals. It is widely used in infant and sensitive-skin formulations as a preservative alternative.
Analyze Ingredient Further→ -
This is a thickening and stabilizing agent that helps give skincare products their texture and consistency. It works by absorbing water and forming a gel-like network, making products feel smooth and creamy on the skin without leaving a greasy residue.
Benefits
- Creates smooth, pleasant product texture
- Helps stabilize emulsions and prevent separation
- Allows for lightweight formulations that don't feel heavy
Science: Limited peer-reviewed data available for this ingredient. It is widely used in cosmetics and generally recognized as safe by regulatory bodies including the CosIng database and is approved for use in the EU and US.
Analyze Ingredient Further→ -
BHT (butylated hydroxytoluene) is a synthetic antioxidant used in skincare products to prevent oils and other ingredients from oxidizing and going rancid. It's used at very low concentrations (0.0002% to 0.5%) to extend shelf life.
Benefits
- Prevents product degradation and extends shelf life
- Keeps formulations stable over time
- Allows use of beneficial oils without them spoiling
Potential concerns
- Can cause skin irritation or allergic reactions in sensitive individuals at higher concentrations
- May cause mild contact sensitization in some people
- Minimal systemic absorption when applied to skin, but oral ingestion studies show potential liver and kidney effects at high doses
Science: The Cosmetic Ingredient Review Expert Panel concluded BHT is safe as used in cosmetic formulations at typical concentrations. When applied to skin, BHT remains largely in the skin with minimal systemic absorption, unlike oral exposure which showed some toxic effects in animal studies at high doses.
Analyze Ingredient Further→ -
Disodium EDTA is a chelating agent that binds to metals and minerals in skincare formulations, helping to preserve product stability and extend shelf life. It's used in small amounts (typically under 2%) to prevent unwanted chemical reactions that could degrade the formula.
Benefits
- Stabilizes cosmetic formulations by binding trace metals
- Extends product shelf life and maintains efficacy
- Allows other skincare ingredients to work more effectively
Potential concerns
- May increase skin penetration of other ingredients by chelating calcium in the skin barrier—only a concern if combined with potentially harmful substances
- Not absorbed through skin in normal use, but inhalation from sprays was identified as a theoretical concern in safety assessments
Science: The Cosmetic Ingredient Review Expert Panel confirmed safety in 2023 based on standard use concentrations. Clinical studies show no skin absorption; however, it can affect how other chemicals penetrate the skin, so formulators must account for this when combining with other actives.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Polysorbate 20 is a mild emulsifier and solubilizer commonly used in skincare products to help mix oil and water-based ingredients together and keep them stable. It's also used to help dissolve fragrance and active ingredients evenly throughout a formula.
Benefits
- Helps create stable, smooth textures by blending incompatible ingredients
- Improves product consistency and shelf life
- Allows even distribution of active ingredients and fragrance
Potential concerns
- May cause irritation or allergic reactions in people with sensitive skin
- Can occasionally strip skin's natural oils if used in high concentrations
- Some individuals report sensitivity to polysorbates, though this is relatively uncommon
Science: The provided study examined polysorbate 20 as a formulation component in a clinical cancer treatment (vidutolimod), not as a cosmetic ingredient. Limited peer-reviewed data exists specifically evaluating polysorbate 20 safety in topical skincare; however, it is widely used globally and recognized as safe by major regulatory bodies (FDA, EU) at typical cosmetic concentrations (typically under 5%).
Analyze Ingredient Further→ -
Chlorphenesin is a synthetic preservative used in skincare products to prevent bacterial and fungal growth, extending shelf life. It's a broad-spectrum antimicrobial agent that helps keep products safe from contamination during storage and use.
Benefits
- Prevents microbial contamination in skincare formulations
- Extends product shelf life
- Allows formulas to remain stable without refrigeration
Potential concerns
- May cause irritation to sensitive eyes and eye area when present in eye products
- Degrades under UV exposure, potentially creating more harmful breakdown products
- Limited long-term safety data in peer-reviewed literature
Science: Research shows chlorphenesin can be toxic to eye tissue cells at approved concentrations, particularly affecting meibomian glands. When exposed to sunlight, it breaks down into compounds like 4-chlorophenol that may be more ecotoxic than the original ingredient, though systemic absorption in skincare is typically minimal.
Analyze Ingredient Further→ -
Silica is a mineral powder derived from silicon dioxide that's commonly used in skincare and makeup products. It works primarily as a texture enhancer and absorbent, helping to mattify skin, improve product feel, and absorb excess oil.
Benefits
- Mattifies skin and reduces shine
- Improves product texture and spreadability
- Absorbs excess sebum and moisture
- Creates a smooth, refined appearance
Potential concerns
- When used as nanoparticles, potential for skin penetration remains under study
- Inhalation of silica powder (primarily occupational concern) has known health risks; topical use in cosmetics is considered lower risk
- Listed among potential carcinogenic substances in cosmetic formulations, though safe use levels and regulatory limits are established in the EU and US
Science: A 2023 review of European facial cosmetics identified silica among potential carcinogenic ingredients present in commercial products, though this reflects presence rather than proven harm at typical use concentrations. Research on silica nanoparticles suggests they are being developed for cosmetic use, but percutaneous penetration and long-term safety data remain limited. Regulatory agencies (EU, FDA) have established safe concentration limits for cosmetic use.
Analyze Ingredient Further→ -
Sodium Hydroxide is a strong alkaline chemical used in skincare products primarily as a pH buffer to neutralize acids and adjust the product's pH to safe levels for skin. It is not an active skincare ingredient and appears only in trace amounts in finished products.
Potential concerns
- In concentrated form, sodium hydroxide is caustic and can cause severe chemical burns; however, in cosmetic products it is diluted and pH-buffered to safe levels
- Undiluted or highly concentrated sodium hydroxide should never contact skin directly
Science: The provided research discusses sodium hydroxide only in a specialized medical context (10% solution for surgical cauterization of ingrown toenails), which is not relevant to cosmetic skincare use. In properly formulated skincare products, sodium hydroxide is used in minimal concentrations solely for pH adjustment and is considered safe by regulatory bodies including the FDA and EU.
Analyze Ingredient Further→ -
Xanthan gum is a natural thickener derived from fermented bacteria that helps give skincare products a smooth, gel-like texture. It stabilizes formulas and prevents ingredients from separating, while also helping products spread evenly on skin.
Benefits
- Creates smooth, pleasant texture
- Stabilizes emulsions and prevents separation
- Improves product spreadability and application
Science: Xanthan gum is an FDA-approved, anionic polysaccharide with a long history of safe use across food, pharmaceutical, and cosmetic industries since 1969. Its performance as a thickener and stabilizer is well-established in scientific literature, with no notable skin irritation concerns reported.
Analyze Ingredient Further→ -
This is a silicone-based polymer that forms a lightweight, flexible film on the skin. It's created by cross-linking dimethicone (a common silicone) with vinyl dimethicone, making it more stable and long-lasting than regular silicone oils. It helps products glide smoothly and creates a silky texture.
Benefits
- Smooths skin texture and blurs fine lines temporarily
- Creates a silky, non-greasy feel
- Improves product spreadability and wear time
- Provides a light, breathable barrier
Science: Limited peer-reviewed data available for this ingredient. Cross-linked silicone polymers are widely used in cosmetics and are generally recognized as safe by regulatory agencies including the FDA and EU. They are non-irritating, non-comedogenic, and rarely cause sensitization.
Analyze Ingredient Further→ -
Ascorbic acid is vitamin C in its purest, most potent form. It works as a powerful antioxidant that neutralizes free radical damage from sun exposure and environmental stress, and also supports your skin's natural collagen production to improve texture and firmness.
Benefits
- Protects skin from free radical damage caused by UV rays and pollution
- Improves skin texture and reduces the appearance of fine lines and wrinkles
- Brightens skin and may help fade age spots and uneven tone
- Supports collagen production for firmer, more resilient skin
Potential concerns
- Can be irritating, especially for sensitive skin, due to its low pH (works best below pH 3.5)
- Unstable and degrades quickly when exposed to light, heat, or air — products may lose effectiveness over time
- May cause redness, stinging, or dryness if used too frequently or in high concentrations
- Requires specific formulation to penetrate skin effectively; poorly formulated products may not deliver promised benefits
Science: Research shows L-ascorbic acid must be formulated at pH below 3.5 and at 5–20% concentration to effectively penetrate skin. A clinical trial demonstrated that 5% vitamin C cream significantly improved photoaged skin texture, reduced wrinkles, and promoted elastic tissue repair over 6 months. However, effectiveness is highly dependent on formulation quality and product stability.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Glyceryl stearate is a natural emulsifier and thickener derived from vegetable oils and glycerin. It helps bind water and oil together in skincare formulas, creating a smooth texture while providing mild moisturizing properties.
Benefits
- Helps create stable, smooth product textures
- Mild emollient that softens skin
- Derived from natural sources (vegetable-based)
Science: The Cosmetic Ingredient Review Expert Panel confirmed in 2023 that glyceryl stearate and related glyceryl diesters are safe for cosmetic use at standard concentrations. Research indicates the ingredient has a skin-safe pH profile and demonstrates good stability in formulations.
Analyze Ingredient Further→ -
Stearyl alcohol is a waxy, naturally-derived fatty alcohol used in skincare products as a thickener and emollient. It helps create a smooth texture and forms a protective barrier on the skin to lock in moisture.
Benefits
- Improves skin hydration by forming a protective moisture barrier
- Creates a smooth, luxurious product texture
- Well-tolerated by most skin types
Potential concerns
- Rare allergic contact dermatitis reported in sensitive individuals
- May cause irritation or allergic reactions in people with stearyl alcohol sensitivity
Science: Stearyl alcohol is regarded as safe by cosmetic safety panels at typical use concentrations. Recent research suggests it may have anti-inflammatory properties in topical formulations, though rare cases of allergic contact dermatitis have been documented in sensitive individuals.
Analyze Ingredient Further→ -
Cetyl alcohol is a fatty alcohol derived from natural sources like palm oil that works as an emollient and thickening agent in skincare products. It helps create a smooth texture, improve product consistency, and soften the skin by forming a light protective layer.
Benefits
- Softens and moisturizes skin
- Improves product texture and spreadability
- Helps stabilize emulsions (creams and lotions)
Potential concerns
- Very rare allergic reactions or contact sensitivity in susceptible individuals
- May cause mild irritation in products with high concentrations
Science: Cetyl alcohol has a long history of safe use in topical cosmetics with established safety data. Research indicates it forms nanostructured systems that interact well with skin and does not cause irritation or cellular toxicity in standard formulations.
Analyze Ingredient Further→ -
PEG-100 Stearate is an emulsifier—a ingredient that helps blend oil and water together in skincare creams and lotions. It's used to create smooth, stable textures and can help improve how well products spread on skin.
Benefits
- Helps create smooth, gel-like cream textures
- Improves physical stability of formulations
- May support skin barrier function when used in basic moisturizing formulas
Science: Research shows that formulations containing PEG-100 Stearate alongside other emulsifiers can improve skin barrier function and reduce trans-epidermal water loss, suggesting it may be suitable for compromised or sensitive skin in moisturizing products.
Analyze Ingredient Further→ -
Isononyl isononanoate is a lightweight synthetic oil derived from fatty acids, used in skincare products as an emollient to soften and smooth skin. It provides a silky texture without a greasy feel, making it popular in moisturizers, serums, and foundations.
Benefits
- Softens and conditions skin
- Provides lightweight moisture without heaviness
- Improves product texture and spreadability
Science: Research shows isononyl isononanoate has a very clean chemical profile with minimal volatile compounds—mainly just the ester itself and traces of isononyl alcohol from synthesis. It is well-tolerated in cosmetic formulations and considered safe for topical use.
Analyze Ingredient Further→ -
Steareth-21 is an emulsifier—a helper ingredient that blends oil and water together in creams and lotions. It's made by combining stearic acid (a natural fatty acid) with ethylene oxide, creating a molecule that stabilizes skincare formulations and keeps them from separating.
Benefits
- Helps create stable, smooth emulsions in creams and lotions
- Improves product texture and spreadability
- Allows other active ingredients to be evenly distributed
Science: Research shows that steareth-21 used in oil-in-water emulsions significantly reduces skin penetration of certain sunscreen agents compared to other emulsifier systems, suggesting it creates a stronger barrier effect. This makes it a preferred choice in protective formulations where controlling ingredient absorption is desirable.
Analyze Ingredient Further→ -
Nylon-12 is a microplastic powder used in cosmetics as an absorbent and texture-enhancing agent. It helps products feel smooth, absorb excess oil, and improve spreadability on skin.
Benefits
- Absorbs excess sebum and oil
- Improves product texture and feel
- Provides a smooth, matte finish
Potential concerns
- Microplastic ingredient with potential environmental persistence
- May contribute to microplastic pollution in aquatic ecosystems when washed down the drain
- Electrostatic adhesion to skin could theoretically trap bacteria or disrupt skin microbiome (limited evidence in humans)
Science: Research shows nylon polymers are microplastics that can adhere to aquatic microorganisms and disrupt their function. While direct human skin safety data is limited, growing concern about microplastic accumulation in the environment and potential bioaccumulation warrants caution. Regulatory bodies in some regions are restricting microplastics in rinse-off cosmetics.
Analyze Ingredient Further→ -
Retinol is a form of vitamin A that works by stimulating skin cell turnover and boosting collagen production. It's one of the most well-researched anti-aging ingredients, helping to improve skin texture, reduce fine lines, and strengthen the deeper layers of your skin.
Benefits
- Reduces the appearance of fine lines and wrinkles
- Improves skin texture and smoothness
- Decreases hyperpigmentation and age spots
- Thickens the epidermis and dermis over time
- Supports skin barrier function
Potential concerns
- Can cause initial redness, stinging, and skin scaling, especially when first introduced
- May increase sun sensitivity — daily SPF is essential when using retinol
- Not recommended during pregnancy without medical guidance
- Can be irritating for sensitive skin types; start with low concentrations
Science: Clinical studies confirm retinol significantly improves photoaging, wrinkle appearance, and hyperpigmentation. While effective, retinol is more likely to cause irritation and scaling than gentler alternatives like bakuchiol, though both show similar efficacy for anti-aging benefits.
Analyze Ingredient Further→ -
Styrene/Acrylates Copolymer is a synthetic polymer used as a film-forming and binding agent in skincare products. It creates a lightweight, flexible layer on the skin's surface that helps products adhere better and can provide a subtle smoothing or mattifying effect.
Benefits
- Improves product texture and wear
- Provides light film-forming properties for a smooth finish
- Helps bind other ingredients together
Potential concerns
- Potential for buildup with repeated layering
- May feel occlusive on sensitive or acne-prone skin if overused
Science: Limited peer-reviewed data available for this ingredient. Styrene/Acrylates Copolymers are widely used in cosmetics and generally recognized as safe by regulatory bodies, though individual sensitivities can vary.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients