Ingredients
-
Analysis not yet available for this ingredient.
-
Butylene glycol is a humectant—a type of ingredient that draws water into the skin and helps it stay hydrated. It's a small, lightweight molecule commonly used in moisturizers to improve hydration without leaving a heavy feel on the skin.
Benefits
- Increases skin hydration and moisture retention
- Lightweight and absorbs quickly
- Helps other active ingredients penetrate the skin more effectively
Science: Research demonstrates that butylene glycol, when combined with other humectants (like glycerin and hyaluronic acid) and occlusive ingredients in moisturizers, significantly improves skin hydration in both healthy skin and compromised skin conditions such as atopic dermatitis. It is recognized as a safe, effective humectant in dermatological formulations.
Analyze Ingredient Further→ -
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Sodium hyaluronate is the salt form of hyaluronic acid, a naturally occurring substance found in your skin that acts like a moisture magnet. In skincare products, it absorbs water from the environment and binds it to your skin, helping to hydrate and plump the skin's surface.
Benefits
- Delivers intense hydration to the skin
- Helps reduce the appearance of fine lines by improving skin moisture
- Supports skin barrier function
- Suitable for all skin types, including sensitive and oily skin
Potential concerns
- In very dry climates with low humidity, it may draw moisture from deeper skin layers if not sealed with an occlusive product
- Rare allergic reactions are possible but extremely uncommon
Science: While the provided research focuses on intra-articular injections for joint health (showing good safety and efficacy), hyaluronic acid and its salt form are well-established in dermatology for topical hydration. The molecule's safety profile is well-documented across decades of use in medical and cosmetic applications, with severe adverse reactions being extremely rare.
Analyze Ingredient Further→ -
Caprylyl glycol is a preservative and skin-conditioning ingredient derived from coconut oil. It helps prevent bacterial and mold growth in skincare products while also providing mild hydrating and humectant benefits to the skin.
Benefits
- Helps preserve product freshness and prevent contamination
- Provides gentle humectant properties to help retain skin moisture
- Often used as a gentler alternative to traditional preservatives
Potential concerns
- Rare cases of allergic contact dermatitis have been reported in sensitive individuals
- May cause irritation in those with known sensitivity to glycols
Science: A 200-subject repeat patch test study found no delayed hypersensitivity reactions to caprylyl glycol at typical use concentrations. However, isolated case reports of allergic contact dermatitis exist, suggesting it can act as an allergen in susceptible individuals. It is widely used in infant and sensitive-skin formulations as a preservative alternative.
Analyze Ingredient Further→ -
Propanediol is a lightweight humectant—a molecule that draws water into the skin to keep it hydrated. It's also used in cosmetic formulations as a solvent and preservative booster, helping products stay stable and feel smooth on the skin.
Benefits
- Hydrates and moisturizes the skin
- Improves product texture and spreadability
- Helps preserve formulations naturally
Science: Propanediol can be produced through bio-based fermentation (from glycerol using microorganisms), making it an environmentally friendly alternative to traditional chemical synthesis. It is widely recognized as safe in cosmetic and food applications, with established use as both a humectant and preservative enhancer.
Analyze Ingredient Further→ -
Tocopherol is a form of vitamin E, a fat-soluble antioxidant that protects skin from damage caused by free radicals and oxidative stress. It helps maintain skin's natural barrier function and is commonly used in skincare products to prevent premature aging and support overall skin health.
Benefits
- Protects skin from free radical damage and oxidative stress
- Supports skin barrier function and moisture retention
- May help reduce signs of aging caused by UV exposure and environmental damage
- Works as a lipid antioxidant to prevent degradation of skin oils
Science: Tocopherol (α-tocopherol) is recognized in peer-reviewed research as a key endogenous defense mechanism against oxidative stress in aging skin, particularly from UV-induced damage. Studies confirm it functions as a lipid-soluble antioxidant capable of preventing lipid peroxidation, with established efficacy in cosmetic and therapeutic applications.
Analyze Ingredient Further→ -
Ethylhexylglycerin is a preservative and antimicrobial ingredient used to prevent bacterial growth and extend shelf life in skincare products. It's a multifunctional ingredient that helps keep formulations stable and free from contamination.
Benefits
- Prevents bacterial contamination in products
- Helps extend product shelf life
- Works synergistically with other preservatives for enhanced protection
Potential concerns
- May not be effective against all bacterial species (notably some Pseudomonas aeruginosa strains)
- Preservative-related sensitization possible in sensitive individuals, though uncommon
Science: Research shows ethylhexylglycerin has broad antimicrobial activity against many common cosmetic contaminants, though effectiveness varies by bacterial species. Studies demonstrate it can work synergistically with other preservative components to enhance biofilm inhibition.
Analyze Ingredient Further→ -
Methyl Trimethicone is a lightweight silicone oil that creates a smooth, silky feel on the skin. It forms a breathable protective layer and helps products spread evenly without leaving a heavy or greasy residue.
Benefits
- Smooth, soft skin texture
- Helps products glide on evenly
- Creates a lightweight protective barrier without heaviness
Science: Limited peer-reviewed data available for this ingredient. Methyl Trimethicone is a volatile silicone widely used in cosmetics with a long safety history; it is generally recognized as safe by regulatory authorities including the FDA and EU.
Analyze Ingredient Further→ -
Caprylyl Methicone is a silicone-based conditioning agent that creates a smooth, lightweight film on the skin. It's used in skincare products to improve texture, reduce tackiness, and help other ingredients spread evenly across the skin.
Benefits
- Smooths skin texture
- Reduces greasy or sticky feel
- Improves product spreadability and absorption
Science: Limited peer-reviewed data available for this ingredient. It is a volatile silicone commonly used in cosmetics with a strong safety history and low skin penetration due to its molecular structure.
Analyze Ingredient Further→ -
Disteardimonium hectorite is a clay-derived mineral ingredient used as a thickener and absorbent in cosmetics. It helps create a smooth texture, absorb excess oil, and improve the spreadability of skincare and makeup products.
Benefits
- Absorbs excess oil and sebum
- Improves product texture and consistency
- Helps products spread evenly on skin
Potential concerns
- May cause allergic contact dermatitis in sensitive individuals
- Documented cases of positive patch test reactions when used in cosmetic formulations
Science: A 2020 case study in Contact Dermatitis documented allergic sensitization to disteardimonium hectorite when patch tested as part of a cosmetic formulation, though this appears to be a rare reaction. Limited peer-reviewed safety data exists for this ingredient in general use.
Analyze Ingredient Further→ -
2-Hexanediol is a humectant and preservative booster commonly used in skincare products to help retain moisture and extend shelf life. It works by drawing water into the skin while also enhancing the effectiveness of other preservatives, allowing brands to use lower amounts of traditional preservatives.
Benefits
- Hydrates and moisturizes skin by drawing in water
- Helps preserve products with lower preservative levels
- Works synergistically with other skincare ingredients like niacinamide
Potential concerns
- May cause cell viability concerns at concentrations above 1.0% in laboratory studies
- Limited real-world safety data in humans at typical skincare concentrations (usually 2-5%)
- Potential environmental concern if released into water systems
Science: While 2-hexanediol is widely used as a preservative substitute for parabens, recent cytotoxicity studies raise questions about safety at concentrations commonly found in skincare products (>2%). However, these findings are from laboratory cell studies and may not directly translate to human skin application. Further human safety studies are needed to confirm real-world risk.
Analyze Ingredient Further→ -
Ascorbic acid is vitamin C in its purest, most potent form. It works as a powerful antioxidant that neutralizes free radical damage from sun exposure and environmental stress, and also supports your skin's natural collagen production to improve texture and firmness.
Benefits
- Protects skin from free radical damage caused by UV rays and pollution
- Improves skin texture and reduces the appearance of fine lines and wrinkles
- Brightens skin and may help fade age spots and uneven tone
- Supports collagen production for firmer, more resilient skin
Potential concerns
- Can be irritating, especially for sensitive skin, due to its low pH (works best below pH 3.5)
- Unstable and degrades quickly when exposed to light, heat, or air — products may lose effectiveness over time
- May cause redness, stinging, or dryness if used too frequently or in high concentrations
- Requires specific formulation to penetrate skin effectively; poorly formulated products may not deliver promised benefits
Science: Research shows L-ascorbic acid must be formulated at pH below 3.5 and at 5–20% concentration to effectively penetrate skin. A clinical trial demonstrated that 5% vitamin C cream significantly improved photoaged skin texture, reduced wrinkles, and promoted elastic tissue repair over 6 months. However, effectiveness is highly dependent on formulation quality and product stability.
Analyze Ingredient Further→ -
Butyloctyl Salicylate is a conditioning agent derived from salicylic acid (the same compound used in acne treatments). In skincare products, it works as a skin and hair conditioning ingredient, helping to soften and smooth the skin's surface at typical use levels of 0.5–5%.
Benefits
- Conditions and softens skin
- Improves skin texture and smoothness
- Lightweight conditioning without heavy residue
Potential concerns
- May cause irritation or sensitization in formulations that are not properly balanced
- Some salicylates are absorbed through the skin; long-term effects of topical absorption are not extensively documented
Science: The Cosmetic Ingredient Review Expert Panel (2025) concluded that Butyloctyl Salicylate is safe in cosmetics at current use levels when formulated to be non-irritating and non-sensitizing. The ingredient has low acute toxicity via dermal exposure, though around 10% of applied salicylates may remain in the skin.
Analyze Ingredient Further→ -
Isododecane is a lightweight, colorless liquid hydrocarbon used as a solvent and carrier in skincare formulations. It helps dissolve and deliver other active ingredients, particularly oil-soluble compounds like UV filters and silicone polymers, while providing a smooth, non-greasy feel on the skin.
Benefits
- Serves as an effective solvent for oil-soluble actives and UV absorbers
- Enables efficient delivery of ingredients into the skin
- Provides a light, non-occlusive texture in formulations
Science: Research demonstrates that isododecane is a suitable solvent for UV-absorbing sunscreen ingredients and supports effective topical delivery of active compounds through the skin. It is commonly used in pharmaceutical and cosmetic formulations without documented safety concerns at typical use levels.
Analyze Ingredient Further→ -
Magnesium sulfate is a mineral salt commonly used in skincare products as a bulking agent and texture builder. It's the same compound found in Epsom salts and has a long history of safe use in both cosmetics and medicine.
Benefits
- Adds texture and consistency to formulations
- Well-tolerated by most skin types
- Non-sensitizing based on extensive testing
Science: The Cosmetic Ingredient Review Expert Panel concluded magnesium sulfate is safe in cosmetics at concentrations up to 25% in rinse-off products and 11% in leave-on products. Clinical patch testing and toxicology studies showed no skin irritation or sensitization potential, with the ingredient's long medical history providing additional safety confidence.
Analyze Ingredient Further→ -
Hyaluronic acid is a naturally occurring molecule found in your skin that acts like a sponge, holding water to keep skin hydrated and plump. In skincare products, it helps improve skin moisture, reduce the appearance of fine lines, and support overall skin texture and firmness.
Benefits
- Boosts skin hydration and moisture retention
- Helps reduce the appearance of fine lines and wrinkles
- Supports skin firmness and elasticity
- Well-tolerated and safe for most skin types
- May enhance effects of other anti-aging treatments
Science: Multiple clinical studies confirm hyaluronic acid is highly effective and well-tolerated for improving skin hydration and signs of aging. Research shows it works as an effective standalone treatment and also enhances results when combined with other anti-aging procedures, with benefits sustained over extended use periods.
Analyze Ingredient Further→ -
Zinc oxide is a mineral UV filter that sits on top of your skin to physically block both UVA and UVB rays from reaching your skin. It's one of the few sunscreen actives recognized as safe and effective by the FDA, and it doesn't get absorbed into your bloodstream.
Benefits
- Provides broad-spectrum UV protection (blocks both UVA and UVB rays)
- Mineral/physical blocker — doesn't absorb into skin, making it suitable for sensitive skin and safe during pregnancy
- Photostable — doesn't degrade in sunlight
- Generally well-tolerated with low risk of irritation or allergic reaction
Potential concerns
- Can leave a white cast on skin, especially at higher concentrations needed for adequate protection
- May feel heavy or thick in formulation
Science: Zinc oxide is a mineral UV filter with an established safety profile and is not systemically absorbed through skin. Current scientific evidence supports its efficacy and safety for routine sunscreen use, with no associated negative health effects documented. Unlike organic UV filters, it does not contribute to environmental concerns like coral bleaching.
Analyze Ingredient Further→ -
Glyceryl Caprylate is a mild emulsifier and penetration enhancer derived from glycerin and caprylic acid (a natural fatty acid). In skincare products, it helps blend water and oil-based ingredients together and can improve how active ingredients absorb into the skin.
Benefits
- Helps formulations blend water and oil ingredients
- May enhance absorption of other skincare actives
- Mild and generally well-tolerated by most skin types
Science: Safety assessments by the Cosmetic Ingredient Review panel confirm glyceryl caprylate is safe for cosmetic use. Research demonstrates it functions effectively as a penetration enhancer in topical formulations, helping active ingredients reach deeper skin layers.
Analyze Ingredient Further→ -
Cyclohexasiloxane is a silicone-derived conditioning agent that creates a smooth, lightweight feel on skin and hair. It helps products glide smoothly and can improve the texture and appearance of formulations without leaving a heavy residue.
Benefits
- Smooths and conditions skin and hair
- Creates a lightweight, non-greasy feel
- Improves product spreadability and texture
Potential concerns
- Minimal absorption through skin, but potential bioaccumulation concerns remain under investigation—regulatory agencies continue to evaluate whether this ingredient meets persistence and bioaccumulation criteria
- Not recommended for users concerned about persistent chemicals in the environment
Science: Multiple toxicity studies show no skin irritation, sensitization, or genotoxicity concerns at typical cosmetic concentrations. However, recent 2024 research flags that cyclohexasiloxane (D6) may have bioaccumulation potential similar to its predecessors D4 and D5, which were restricted due to PBT/vPvB classification; regulatory review is ongoing and recommendations may change.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Saccharomyces Ferment Filtrate is a liquid derived from fermenting yeast (a type of fungus) that's filtered to remove the solid yeast cells. It's used in skincare for its potential to support skin health and improve texture, likely because fermentation creates beneficial compounds that may help moisturize and soothe the skin.
Benefits
- May improve skin hydration and moisture retention
- Could help soothe and calm irritated skin
- May support a smoother, more even skin texture
Science: Limited peer-reviewed data available for this ingredient. Fermented ingredients are generally recognized as safe in cosmetics, though efficacy claims are largely based on traditional use and cosmetic brand research rather than published clinical studies.
Analyze Ingredient Further→ -
Glyceryl Glucoside is a humectant derived from natural sources that helps skin retain moisture by supporting aquaporin-3, a protein channel that regulates water movement in skin cells. It works to strengthen the skin barrier and improve hydration levels.
Benefits
- Enhances skin hydration and moisture retention
- Supports skin barrier function
- May help regulate skin cell proliferation and migration
Science: Recent research (2024) demonstrates that Glyceryl Glucoside effectively increases aquaporin-3 expression in keratinocytes and enhances cell migration while reducing hyperproliferation in inflammatory skin models, suggesting potential benefits for barrier-compromised skin conditions.
Analyze Ingredient Further→ -
Anthemis Nobilis Flower Oil is an essential oil extracted from Roman chamomile flowers. It's used in skincare products for its pleasant fragrance and skin-conditioning properties, helping to soften and soothe the skin.
Benefits
- Gentle fragrance
- Skin-conditioning and softening
- Traditional soothing properties
Potential concerns
- Potential for allergic reactions in sensitive individuals
- May cause sensitization if used at very high concentrations
- Those with ragweed allergies should use with caution
Science: A comprehensive safety assessment by the Cosmetic Ingredient Review Expert Panel concluded that Anthemis nobilis flower oil is safe at typical use concentrations (up to 10%) and is neither irritating nor sensitizing in standard cosmetic formulations when properly manufactured to minimize impurities.
Analyze Ingredient Further→ -
Methyl methacrylate crosspolymer is a synthetic polymer used primarily as a thickening and film-forming agent in skincare formulations. It helps create texture and consistency in products while potentially supporting preservative effectiveness.
Benefits
- Improves product texture and spreadability
- Creates a light film on skin
- May enhance preservative performance, allowing lower preservative levels in formulations
Potential concerns
- Limited safety data specific to skin application in published literature
- Synthetic polymer — may cause sensitivity in those with polymer sensitivities, though this is rare
Science: Research shows that methyl methacrylate crosspolymer at high concentrations (50,000 ppm) can reduce the effectiveness of common preservatives like 1,2-hexanediol against bacteria and fungi, suggesting it may interfere with preservative function rather than support it. Limited peer-reviewed data exists on direct skin safety and efficacy at typical use levels.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients