Ingredients
-
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Aloe Barbadensis Leaf Extract is a concentrated extract derived from the inner gel of the aloe vera plant leaf. It's used in skincare products as a skin-conditioning agent to help soothe and hydrate the skin.
Benefits
- Soothing and anti-inflammatory properties
- Skin hydration and moisture retention
- Antimicrobial and antiviral activity
Potential concerns
- Products must contain less than 50 ppm anthraquinones (bitter yellow compounds from the leaf) to avoid phototoxicity and irritation
- High oral doses in animal studies showed reproductive toxicity and developmental effects; topical exposure at cosmetic concentrations is considered safe when properly purified
- Potential skin irritation in sensitive individuals, particularly if anthraquinone content is not properly controlled
Science: The Cosmetic Ingredient Review Expert Panel assessed aloe-derived ingredients as safe in cosmetics when used at low concentrations (≤0.1%) with anthraquinone levels controlled below 50 ppm. Safety concerns primarily relate to oral ingestion and high-dose exposure; topical application in properly formulated products shows a good safety profile.
Analyze Ingredient Further→ -
Sodium hyaluronate is the salt form of hyaluronic acid, a naturally occurring substance found in your skin that acts like a moisture magnet. In skincare products, it absorbs water from the environment and binds it to your skin, helping to hydrate and plump the skin's surface.
Benefits
- Delivers intense hydration to the skin
- Helps reduce the appearance of fine lines by improving skin moisture
- Supports skin barrier function
- Suitable for all skin types, including sensitive and oily skin
Potential concerns
- In very dry climates with low humidity, it may draw moisture from deeper skin layers if not sealed with an occlusive product
- Rare allergic reactions are possible but extremely uncommon
Science: While the provided research focuses on intra-articular injections for joint health (showing good safety and efficacy), hyaluronic acid and its salt form are well-established in dermatology for topical hydration. The molecule's safety profile is well-documented across decades of use in medical and cosmetic applications, with severe adverse reactions being extremely rare.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Propanediol is a lightweight humectant—a molecule that draws water into the skin to keep it hydrated. It's also used in cosmetic formulations as a solvent and preservative booster, helping products stay stable and feel smooth on the skin.
Benefits
- Hydrates and moisturizes the skin
- Improves product texture and spreadability
- Helps preserve formulations naturally
Science: Propanediol can be produced through bio-based fermentation (from glycerol using microorganisms), making it an environmentally friendly alternative to traditional chemical synthesis. It is widely recognized as safe in cosmetic and food applications, with established use as both a humectant and preservative enhancer.
Analyze Ingredient Further→ -
Ethylhexylglycerin is a preservative and antimicrobial ingredient used to prevent bacterial growth and extend shelf life in skincare products. It's a multifunctional ingredient that helps keep formulations stable and free from contamination.
Benefits
- Prevents bacterial contamination in products
- Helps extend product shelf life
- Works synergistically with other preservatives for enhanced protection
Potential concerns
- May not be effective against all bacterial species (notably some Pseudomonas aeruginosa strains)
- Preservative-related sensitization possible in sensitive individuals, though uncommon
Science: Research shows ethylhexylglycerin has broad antimicrobial activity against many common cosmetic contaminants, though effectiveness varies by bacterial species. Studies demonstrate it can work synergistically with other preservative components to enhance biofilm inhibition.
Analyze Ingredient Further→ -
Squalane is a lightweight, skin-identical oil derived from squalene (a natural component of human sebum). It absorbs easily into the skin to lock in moisture and create a smooth, soft feel without leaving a greasy residue.
Benefits
- Hydrates and moisturizes skin
- Mimics skin's natural oils for better compatibility
- Lightweight emollient that doesn't clog pores
- Antioxidant properties
- Well-tolerated by most skin types
Science: The Cosmetic Ingredient Review Expert Panel confirmed squalane is safe for cosmetic use at typical concentrations (2023). Research demonstrates skin hydrating and emollient activity, and squalane is naturally present in human sebum at ~13%, making it biocompatible with skin.
Analyze Ingredient Further→ -
Sodium phytate is a naturally derived ingredient that acts as a chelating agent, binding to minerals and metals on the skin's surface. In skincare, it's primarily studied for its potential brightening and clarifying properties, though research in this area remains limited.
Benefits
- May help brighten skin appearance
- Potential mild exfoliating or clarifying effect
- Naturally derived ingredient
Potential concerns
- Very limited safety data in skincare applications
- Chelating agents can potentially disrupt skin barrier minerals if used excessively
- Most research focuses on dental use rather than facial skincare
Science: Available research on sodium phytate focuses primarily on dental whitening toothpaste rather than skincare products. One 2025 clinical trial showed modest whitening effects in toothpaste formulations over 3-4 weeks, but efficacy plateaued. Peer-reviewed safety and efficacy data specifically for facial skincare use is limited.
Analyze Ingredient Further→ -
Cetearyl alcohol is a waxy, fatty alcohol derived from vegetable or petroleum sources that acts as an emulsifier and thickener in skincare products. It helps blend oil and water-based ingredients together and gives creams and lotions their smooth, spreadable texture.
Benefits
- Stabilizes emulsions to prevent separation of oil and water
- Thickens and improves texture of creams and lotions
- Creates a smooth, non-greasy feel on skin
Potential concerns
- Rare allergic contact dermatitis reported in sensitive individuals
- May cause localized irritation or allergic reactions in patch-tested cases
Science: Cetearyl alcohol is widely used as an emulsifier in topical formulations and generally has a good safety profile. However, multiple case reports document allergic contact dermatitis in susceptible individuals, suggesting it can act as a contact allergen in rare cases. It does not significantly penetrate skin and primarily remains in the formulation.
Analyze Ingredient Further→ -
Eau is the French word for water, the primary solvent used in most skincare products. It serves as the base ingredient that helps dissolve and deliver active components to your skin.
Science: The provided research articles do not contain relevant data about water as a skincare ingredient. Water is universally recognized as safe and essential for skincare formulations.
Analyze Ingredient Further→ -
Pullulan is a natural polysaccharide (a type of carbohydrate) derived from yeast that acts as a film-forming agent and thickener in skincare products. It creates a lightweight, breathable layer on the skin that can help improve texture and provide a smooth finish, similar to how primer works in makeup.
Benefits
- Creates a smooth, even skin surface and improves product texture
- Forms a lightweight, breathable film that doesn't feel heavy
- Helps other ingredients adhere better to the skin
- Generally well-tolerated by most skin types including sensitive skin
Science: Pullulan is recognized in pharmaceutical and cosmeceutical formulations as a safe, multifunctional ingredient. Limited direct clinical studies exist on pullulan's specific skincare benefits, but it is widely used and accepted as a generally safe ingredient with minimal irritation potential.
Analyze Ingredient Further→ -
Parfum is a mixture of fragrant compounds used to add pleasant scent to skincare products. It's typically composed of essential oils, aromatic chemicals, and solvents blended together to create a specific fragrance profile.
Benefits
- Improves sensory experience and enjoyment of using the product
- Can enhance perceived product quality and appeal
Potential concerns
- May cause allergic contact dermatitis or sensitization, especially in those with fragrance sensitivity
- Can irritate sensitive or compromised skin barriers
- Potential photosensitivity concerns with certain fragrance ingredients when exposed to sunlight
Science: Limited peer-reviewed data available for this ingredient. Fragrance is a known allergen and irritant in some individuals; regulatory bodies like the EU require disclosure of 26 specific allergenic fragrance components when present above threshold levels.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Sodium Polyacryloyldimethyl Taurate is a synthetic polymer used primarily as a thickening and stabilizing agent in skincare formulas. It helps create a smooth texture and keeps product ingredients evenly distributed without separating.
Benefits
- Creates smooth, even product texture
- Improves formula stability
- Helps maintain consistent product performance over time
Science: Limited peer-reviewed data available for this ingredient. It is a synthetic polymer approved for use in cosmetics by major regulatory bodies (including the FDA and EU) and is generally recognized as safe at typical usage levels in skincare products.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Water is the main ingredient in most skincare products, serving as a solvent that helps dissolve and deliver other active ingredients to your skin. It's essential for hydration and helps create the texture and consistency of creams, serums, and lotions.
Benefits
- Hydrates and plumps skin
- Helps deliver other ingredients into the skin
- Essential base for product formulation
Science: Water is the most studied ingredient in skincare. It is non-irritating and universally recognized as safe for topical use by regulatory bodies worldwide, including the FDA and EU cosmetics regulations.
Analyze Ingredient Further→ -
Sodium Acrylates Crosspolymer-2 is a synthetic polymer used in skincare products as a thickening and stabilizing agent. It absorbs water and creates a smooth, gel-like texture in formulations, helping products spread evenly and maintain their consistency.
Benefits
- Creates smooth, spreadable texture
- Helps stabilize product formulation
- Improves water absorption
Science: Limited peer-reviewed data available for this ingredient. As an inert synthetic polymer approved for cosmetic use, it has a well-established safety profile based on its chemical structure and non-absorption through skin.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Hippophae Rhamnoides Oil, also called sea buckthorn oil, is extracted from the berries and seeds of the sea buckthorn plant. It's rich in vitamins, carotenoids, and fatty acids, commonly used in skincare to nourish, moisturize, and support skin's natural barrier function.
Benefits
- Moisturizes and nourishes dry skin
- Rich in antioxidants that may help protect skin from environmental stress
- May help improve skin texture and promote a more radiant appearance
Potential concerns
- Can stain skin and fabrics due to its deep orange color
- Rare allergic reactions possible in sensitive individuals
- May cause irritation if used in excessive amounts on very sensitive skin
Science: Limited peer-reviewed data available for this ingredient. Existing studies suggest sea buckthorn oil contains beneficial compounds including vitamin C, carotenoids, and omega fatty acids, though most evidence comes from traditional use and preliminary research rather than large clinical trials.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients