Ingredients
-
Analysis not yet available for this ingredient.
-
Butylene glycol is a humectant—a type of ingredient that draws water into the skin and helps it stay hydrated. It's a small, lightweight molecule commonly used in moisturizers to improve hydration without leaving a heavy feel on the skin.
Benefits
- Increases skin hydration and moisture retention
- Lightweight and absorbs quickly
- Helps other active ingredients penetrate the skin more effectively
Science: Research demonstrates that butylene glycol, when combined with other humectants (like glycerin and hyaluronic acid) and occlusive ingredients in moisturizers, significantly improves skin hydration in both healthy skin and compromised skin conditions such as atopic dermatitis. It is recognized as a safe, effective humectant in dermatological formulations.
Analyze Ingredient Further→ -
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Sodium hyaluronate is the salt form of hyaluronic acid, a naturally occurring substance found in your skin that acts like a moisture magnet. In skincare products, it absorbs water from the environment and binds it to your skin, helping to hydrate and plump the skin's surface.
Benefits
- Delivers intense hydration to the skin
- Helps reduce the appearance of fine lines by improving skin moisture
- Supports skin barrier function
- Suitable for all skin types, including sensitive and oily skin
Potential concerns
- In very dry climates with low humidity, it may draw moisture from deeper skin layers if not sealed with an occlusive product
- Rare allergic reactions are possible but extremely uncommon
Science: While the provided research focuses on intra-articular injections for joint health (showing good safety and efficacy), hyaluronic acid and its salt form are well-established in dermatology for topical hydration. The molecule's safety profile is well-documented across decades of use in medical and cosmetic applications, with severe adverse reactions being extremely rare.
Analyze Ingredient Further→ -
Caprylyl glycol is a preservative and skin-conditioning ingredient derived from coconut oil. It helps prevent bacterial and mold growth in skincare products while also providing mild hydrating and humectant benefits to the skin.
Benefits
- Helps preserve product freshness and prevent contamination
- Provides gentle humectant properties to help retain skin moisture
- Often used as a gentler alternative to traditional preservatives
Potential concerns
- Rare cases of allergic contact dermatitis have been reported in sensitive individuals
- May cause irritation in those with known sensitivity to glycols
Science: A 200-subject repeat patch test study found no delayed hypersensitivity reactions to caprylyl glycol at typical use concentrations. However, isolated case reports of allergic contact dermatitis exist, suggesting it can act as an allergen in susceptible individuals. It is widely used in infant and sensitive-skin formulations as a preservative alternative.
Analyze Ingredient Further→ -
This is a thickening and stabilizing agent that helps give skincare products their texture and consistency. It works by absorbing water and forming a gel-like network, making products feel smooth and creamy on the skin without leaving a greasy residue.
Benefits
- Creates smooth, pleasant product texture
- Helps stabilize emulsions and prevent separation
- Allows for lightweight formulations that don't feel heavy
Science: Limited peer-reviewed data available for this ingredient. It is widely used in cosmetics and generally recognized as safe by regulatory bodies including the CosIng database and is approved for use in the EU and US.
Analyze Ingredient Further→ -
Disodium EDTA is a chelating agent that binds to metals and minerals in skincare formulations, helping to preserve product stability and extend shelf life. It's used in small amounts (typically under 2%) to prevent unwanted chemical reactions that could degrade the formula.
Benefits
- Stabilizes cosmetic formulations by binding trace metals
- Extends product shelf life and maintains efficacy
- Allows other skincare ingredients to work more effectively
Potential concerns
- May increase skin penetration of other ingredients by chelating calcium in the skin barrier—only a concern if combined with potentially harmful substances
- Not absorbed through skin in normal use, but inhalation from sprays was identified as a theoretical concern in safety assessments
Science: The Cosmetic Ingredient Review Expert Panel confirmed safety in 2023 based on standard use concentrations. Clinical studies show no skin absorption; however, it can affect how other chemicals penetrate the skin, so formulators must account for this when combining with other actives.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Polysorbate 20 is a mild emulsifier and solubilizer commonly used in skincare products to help mix oil and water-based ingredients together and keep them stable. It's also used to help dissolve fragrance and active ingredients evenly throughout a formula.
Benefits
- Helps create stable, smooth textures by blending incompatible ingredients
- Improves product consistency and shelf life
- Allows even distribution of active ingredients and fragrance
Potential concerns
- May cause irritation or allergic reactions in people with sensitive skin
- Can occasionally strip skin's natural oils if used in high concentrations
- Some individuals report sensitivity to polysorbates, though this is relatively uncommon
Science: The provided study examined polysorbate 20 as a formulation component in a clinical cancer treatment (vidutolimod), not as a cosmetic ingredient. Limited peer-reviewed data exists specifically evaluating polysorbate 20 safety in topical skincare; however, it is widely used globally and recognized as safe by major regulatory bodies (FDA, EU) at typical cosmetic concentrations (typically under 5%).
Analyze Ingredient Further→ -
Ethylhexylglycerin is a preservative and antimicrobial ingredient used to prevent bacterial growth and extend shelf life in skincare products. It's a multifunctional ingredient that helps keep formulations stable and free from contamination.
Benefits
- Prevents bacterial contamination in products
- Helps extend product shelf life
- Works synergistically with other preservatives for enhanced protection
Potential concerns
- May not be effective against all bacterial species (notably some Pseudomonas aeruginosa strains)
- Preservative-related sensitization possible in sensitive individuals, though uncommon
Science: Research shows ethylhexylglycerin has broad antimicrobial activity against many common cosmetic contaminants, though effectiveness varies by bacterial species. Studies demonstrate it can work synergistically with other preservative components to enhance biofilm inhibition.
Analyze Ingredient Further→ -
Sodium Hydroxide is a strong alkaline chemical used in skincare products primarily as a pH buffer to neutralize acids and adjust the product's pH to safe levels for skin. It is not an active skincare ingredient and appears only in trace amounts in finished products.
Potential concerns
- In concentrated form, sodium hydroxide is caustic and can cause severe chemical burns; however, in cosmetic products it is diluted and pH-buffered to safe levels
- Undiluted or highly concentrated sodium hydroxide should never contact skin directly
Science: The provided research discusses sodium hydroxide only in a specialized medical context (10% solution for surgical cauterization of ingrown toenails), which is not relevant to cosmetic skincare use. In properly formulated skincare products, sodium hydroxide is used in minimal concentrations solely for pH adjustment and is considered safe by regulatory bodies including the FDA and EU.
Analyze Ingredient Further→ -
Sodium polyacrylate is a synthetic polymer that absorbs and holds water, creating a gel-like texture. In skincare, it's used as a thickener and moisture-retention agent to improve product consistency and help keep skin hydrated.
Benefits
- Absorbs and retains moisture to support skin hydration
- Thickens product texture for better application and feel
- Creates a smooth, spreadable consistency in formulations
Science: Contact dermatitis research involving multiple UK hospital dermatology centres found that sensitisation to sodium polyacrylate is rare, indicating excellent safety for topical skincare use. The ingredient has also been studied for advanced biomedical applications including wearable sensors, demonstrating its biocompatibility.
Analyze Ingredient Further→ -
Corn starch is a fine powder extracted from corn kernels that absorbs moisture and oil from the skin's surface. In skincare products, it's primarily used as a thickening agent and to create a smooth, mattifying texture that reduces shine.
Benefits
- Absorbs excess oil and moisture
- Creates a smooth, matte finish
- Adds texture and body to formulas
Potential concerns
- May clog pores in acne-prone individuals
- Can feel heavy or chalky on some skin types
- Potential for bacterial growth if stored in humid conditions
Science: Limited peer-reviewed data available for this ingredient in skincare applications. Corn starch is generally recognized as safe (GRAS) by the FDA for food and cosmetic use, with low sensitization potential.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients