Ingredients
-
Butylene glycol is a humectant—a type of ingredient that draws water into the skin and helps it stay hydrated. It's a small, lightweight molecule commonly used in moisturizers to improve hydration without leaving a heavy feel on the skin.
Benefits
- Increases skin hydration and moisture retention
- Lightweight and absorbs quickly
- Helps other active ingredients penetrate the skin more effectively
Science: Research demonstrates that butylene glycol, when combined with other humectants (like glycerin and hyaluronic acid) and occlusive ingredients in moisturizers, significantly improves skin hydration in both healthy skin and compromised skin conditions such as atopic dermatitis. It is recognized as a safe, effective humectant in dermatological formulations.
Analyze Ingredient Further→ -
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Sodium hyaluronate is the salt form of hyaluronic acid, a naturally occurring substance found in your skin that acts like a moisture magnet. In skincare products, it absorbs water from the environment and binds it to your skin, helping to hydrate and plump the skin's surface.
Benefits
- Delivers intense hydration to the skin
- Helps reduce the appearance of fine lines by improving skin moisture
- Supports skin barrier function
- Suitable for all skin types, including sensitive and oily skin
Potential concerns
- In very dry climates with low humidity, it may draw moisture from deeper skin layers if not sealed with an occlusive product
- Rare allergic reactions are possible but extremely uncommon
Science: While the provided research focuses on intra-articular injections for joint health (showing good safety and efficacy), hyaluronic acid and its salt form are well-established in dermatology for topical hydration. The molecule's safety profile is well-documented across decades of use in medical and cosmetic applications, with severe adverse reactions being extremely rare.
Analyze Ingredient Further→ -
Caprylyl glycol is a preservative and skin-conditioning ingredient derived from coconut oil. It helps prevent bacterial and mold growth in skincare products while also providing mild hydrating and humectant benefits to the skin.
Benefits
- Helps preserve product freshness and prevent contamination
- Provides gentle humectant properties to help retain skin moisture
- Often used as a gentler alternative to traditional preservatives
Potential concerns
- Rare cases of allergic contact dermatitis have been reported in sensitive individuals
- May cause irritation in those with known sensitivity to glycols
Science: A 200-subject repeat patch test study found no delayed hypersensitivity reactions to caprylyl glycol at typical use concentrations. However, isolated case reports of allergic contact dermatitis exist, suggesting it can act as an allergen in susceptible individuals. It is widely used in infant and sensitive-skin formulations as a preservative alternative.
Analyze Ingredient Further→ -
This is a thickening and stabilizing agent that helps give skincare products their texture and consistency. It works by absorbing water and forming a gel-like network, making products feel smooth and creamy on the skin without leaving a greasy residue.
Benefits
- Creates smooth, pleasant product texture
- Helps stabilize emulsions and prevent separation
- Allows for lightweight formulations that don't feel heavy
Science: Limited peer-reviewed data available for this ingredient. It is widely used in cosmetics and generally recognized as safe by regulatory bodies including the CosIng database and is approved for use in the EU and US.
Analyze Ingredient Further→ -
Glucose is a simple sugar that acts as a humectant in skincare products, meaning it helps draw moisture into the skin and keep it hydrated. It's a naturally occurring ingredient commonly found in honey and other botanical sources.
Benefits
- Hydration and moisture retention
- Humectant properties that help skin feel softer
- Generally well-tolerated by most skin types
Potential concerns
- May contribute to glycation (sugar binding to proteins) with prolonged exposure, potentially affecting skin aging
- Can feed acne-causing bacteria in susceptible individuals
- May cause irritation or sensitivity in some users
Science: Glucose is a key component of honey, which has established antimicrobial, emollient, and humectant properties in dermatological applications. However, the scientific literature raises concerns about sugar and glycation's role in skin aging, suggesting that while glucose provides short-term hydration benefits, excessive or chronic exposure may have negative effects on skin aging.
Analyze Ingredient Further→ -
Trisodium Ethylenediamine Disuccinate is a chelating agent, which means it binds to trace metals in cosmetic formulas to keep products stable and prevent discoloration or degradation. It's used in small amounts primarily to maintain product quality rather than directly benefit your skin.
Benefits
- Extends product shelf life
- Prevents oxidation and discoloration
- Improves formula stability
Science: Limited peer-reviewed data available for this ingredient. It is approved for cosmetic use under EU and US regulations as a chelating agent and is considered safe at the low concentrations used in skincare formulations.
Analyze Ingredient Further→ -
Pentylene glycol is a lightweight humectant—a ingredient that draws water into the skin to improve hydration and texture. It's commonly used in serums, sunscreens, and moisturizers as a preservative booster and skin-conditioning agent.
Benefits
- Improves skin hydration by attracting moisture
- Lightweight feel, absorbs quickly without heaviness
- Helps preserve product stability and extends shelf life
Potential concerns
- Rare contact allergy reported in sensitive individuals
- Emerging evidence suggests it may be an uncommon cosmetic allergen—if you have sensitive or reactive skin, patch test first
Science: Safety studies show a high margin of safety at standard use levels (87–671 in adults), with minimal skin penetration due to the ingredient's volatility. However, recent dermatological reports flag pentylene glycol as an emerging contact allergen in some individuals, warranting attention for those with sensitive skin.
Analyze Ingredient Further→ -
Tocopherol is a form of vitamin E, a fat-soluble antioxidant that protects skin from damage caused by free radicals and oxidative stress. It helps maintain skin's natural barrier function and is commonly used in skincare products to prevent premature aging and support overall skin health.
Benefits
- Protects skin from free radical damage and oxidative stress
- Supports skin barrier function and moisture retention
- May help reduce signs of aging caused by UV exposure and environmental damage
- Works as a lipid antioxidant to prevent degradation of skin oils
Science: Tocopherol (α-tocopherol) is recognized in peer-reviewed research as a key endogenous defense mechanism against oxidative stress in aging skin, particularly from UV-induced damage. Studies confirm it functions as a lipid-soluble antioxidant capable of preventing lipid peroxidation, with established efficacy in cosmetic and therapeutic applications.
Analyze Ingredient Further→ -
Chlorphenesin is a synthetic preservative used in skincare products to prevent bacterial and fungal growth, extending shelf life. It's a broad-spectrum antimicrobial agent that helps keep products safe from contamination during storage and use.
Benefits
- Prevents microbial contamination in skincare formulations
- Extends product shelf life
- Allows formulas to remain stable without refrigeration
Potential concerns
- May cause irritation to sensitive eyes and eye area when present in eye products
- Degrades under UV exposure, potentially creating more harmful breakdown products
- Limited long-term safety data in peer-reviewed literature
Science: Research shows chlorphenesin can be toxic to eye tissue cells at approved concentrations, particularly affecting meibomian glands. When exposed to sunlight, it breaks down into compounds like 4-chlorophenol that may be more ecotoxic than the original ingredient, though systemic absorption in skincare is typically minimal.
Analyze Ingredient Further→ -
Alumina is a fine powder form of aluminum oxide, a naturally occurring mineral. In skincare, it functions as a gentle abrasive, absorbent, and bulking agent that helps absorb excess oil and improve product texture.
Benefits
- Gently exfoliates dead skin cells
- Absorbs excess oil and sebum
- Improves product texture and feel
Science: The Cosmetic Ingredient Review Expert Panel concluded that alumina is safe as used in cosmetics at current concentrations. Occupational exposure studies show alumina dust in industrial settings has not been associated with significant lung damage or cancer, and the form used in cosmetics is essentially the same as that approved for medical devices.
Analyze Ingredient Further→ -
Dipropylene glycol is a lightweight humectant and solvent derived from propylene glycol that helps skincare products absorb into skin while drawing moisture to the surface. It's commonly used in serums, toners, and lightweight moisturizers to improve texture and hydration.
Benefits
- Humectant that draws moisture into the skin
- Lightweight feel that doesn't leave greasy residue
- Enhances absorption of other active ingredients
- Helps preserve product stability
Potential concerns
- Rare potential for allergic contact dermatitis in sensitive individuals (documented in medical device contexts)
- May cause irritation or sensitization in people with compromised skin barriers
- Unlikely concern in typical skincare concentrations, but those with known propylene glycol sensitivity should avoid
Science: Dipropylene glycol diacrylate (a related compound) has been identified as an allergen in medical devices in patch testing studies, though the base dipropylene glycol ingredient itself has limited published dermatology data. Allergic reactions appear rare and primarily documented in specialized medical contexts rather than cosmetic skincare use.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Caprylic/Capric Triglyceride is a lightweight oil derived from coconut that acts as an emollient and helps formulations blend smoothly. It softens skin and reduces water loss by creating an occlusive barrier on the skin's surface.
Benefits
- Improves skin hydration and reduces transepidermal water loss (TEWL)
- Lightweight, non-greasy feel compared to heavier oils
- Helps deliver other active ingredients deeper into the skin
- Smooth, silky texture in skincare formulations
Science: Research shows that emulsions containing 15% caprylic/capric triglyceride significantly increase skin hydration and reduce water loss in healthy subjects. The ingredient is also used as an effective carrier oil in nanoemulsions to enhance penetration of active compounds into skin.
Analyze Ingredient Further→ -
Camellia Japonica Flower Extract is derived from the flowers of the Japanese camellia plant. In skincare, it works as an antioxidant that helps protect skin cells from damage and may support skin's natural repair processes to address signs of aging.
Benefits
- Antioxidant protection against free radical damage
- May support skin firmness and elasticity through collagen and elastin production
- Could help maintain skin barrier function
Science: Recent research demonstrates that Camellia japonica flower extract and its active compound hyperoside activate cellular repair pathways in human skin cells, reducing oxidative stress and promoting collagen synthesis. However, current evidence is limited to laboratory and cell-based studies; clinical efficacy in humans requires further investigation.
Analyze Ingredient Further→ -
Coco-Caprylate is a lightweight, fast-absorbing oil derived from coconut that acts as an emollient and texture enhancer in skincare products. It helps soften and condition the skin while improving the spreadability and feel of formulations.
Benefits
- Lightweight moisturizing without a greasy residue
- Improves product texture and skin feel
- Helps dissolve and stabilize UV filters in sunscreens
Science: Research shows Coco-Caprylate performs comparably to other standard cosmetic emollients in sunscreen formulations. While it has moderate polarity, it was slightly less optimal than Dibutyl Adipate for maximizing UVA protection in sunscreens, though it does not negatively impact SPF performance.
Analyze Ingredient Further→ -
2-Hexanediol is a humectant and preservative booster commonly used in skincare products to help retain moisture and extend shelf life. It works by drawing water into the skin while also enhancing the effectiveness of other preservatives, allowing brands to use lower amounts of traditional preservatives.
Benefits
- Hydrates and moisturizes skin by drawing in water
- Helps preserve products with lower preservative levels
- Works synergistically with other skincare ingredients like niacinamide
Potential concerns
- May cause cell viability concerns at concentrations above 1.0% in laboratory studies
- Limited real-world safety data in humans at typical skincare concentrations (usually 2-5%)
- Potential environmental concern if released into water systems
Science: While 2-hexanediol is widely used as a preservative substitute for parabens, recent cytotoxicity studies raise questions about safety at concentrations commonly found in skincare products (>2%). However, these findings are from laboratory cell studies and may not directly translate to human skin application. Further human safety studies are needed to confirm real-world risk.
Analyze Ingredient Further→ -
Sodium Hydroxide is a strong alkaline chemical used in skincare products primarily as a pH buffer to neutralize acids and adjust the product's pH to safe levels for skin. It is not an active skincare ingredient and appears only in trace amounts in finished products.
Potential concerns
- In concentrated form, sodium hydroxide is caustic and can cause severe chemical burns; however, in cosmetic products it is diluted and pH-buffered to safe levels
- Undiluted or highly concentrated sodium hydroxide should never contact skin directly
Science: The provided research discusses sodium hydroxide only in a specialized medical context (10% solution for surgical cauterization of ingrown toenails), which is not relevant to cosmetic skincare use. In properly formulated skincare products, sodium hydroxide is used in minimal concentrations solely for pH adjustment and is considered safe by regulatory bodies including the FDA and EU.
Analyze Ingredient Further→ -
Tin Oxide is a mineral powder used in cosmetics primarily as a colorant and opacifying agent to create a smooth, matte finish in powders and foundations. It's an inert mineral that sits on top of the skin rather than being absorbed.
Benefits
- Provides opacity and coverage in powder formulations
- Creates a matte or satin finish
- Inert and unlikely to cause irritation in topical skincare use
Potential concerns
- Inhalation of powder particles should be avoided; inhaling tin oxide dust in industrial settings has been linked to lung concerns, though cosmetic powder use is a different exposure route
- No significant skin or eye irritation reported in normal cosmetic use
Science: The available research focuses on occupational inhalation hazards in industrial manufacturing rather than cosmetic use on skin. Tin oxide is poorly soluble and remains on the skin surface, making systemic absorption unlikely from topical application. Limited peer-reviewed data specifically addresses safety in finished skincare products.
Analyze Ingredient Further→ -
Betaine is a naturally occurring compound found in plants like sugar beets and rice that helps skin retain moisture. In skincare products, it works as a humectant to draw water into the skin and maintain hydration.
Benefits
- Hydrates and moisturizes skin
- Helps skin retain water
- May have anti-inflammatory properties
- Generally non-irritating and well-tolerated
Science: Research indicates betaine (particularly in combination with polyhexanide) is nontoxic and well-tolerated in topical applications. Studies on rice-derived betaine show it is safe, non-irritating, and hypoallergenic, with potential anti-inflammatory and moisturizing benefits for skin.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Meadowfoam seed oil is a lightweight plant oil extracted from meadowfoam seeds, prized for its exceptional stability and rich fatty acid profile. It absorbs quickly into skin while providing moisture and a silky feel, making it a popular choice in premium skincare formulations.
Benefits
- Deep moisturizing without heavy greasy residue
- Improves skin barrier function
- Rich in fatty acids and antioxidants
- Excellent oxidative stability compared to many other plant oils
Science: Limited peer-reviewed data available for this ingredient. Traditional use and cosmetic industry data suggest excellent safety and skin tolerance, with a composition dominated by long-chain fatty acids (C20-C22) that support skin hydration and protection.
Analyze Ingredient Further→ -
Sunflower seed oil is a natural plant oil extracted from sunflower seeds. In skincare, it acts as a moisturizer and emollient, helping to soften and hydrate the skin while forming a protective barrier on the skin's surface.
Benefits
- Hydration and moisturizing
- Skin softening and smoothing
- Rich in antioxidants and vitamin E
Science: Recent research shows sunflower oil does not trigger cross-reactivity with common allergens like nickel or Compositae plant allergens, supporting its safety profile for sensitive skin. It is well-tolerated and has a long history of safe use in cosmetics.
Analyze Ingredient Further→ -
Acetyl Tetrapeptide-5 is a synthetic peptide (short chain of amino acids) designed to mimic natural signaling molecules in skin. It's primarily used in anti-aging and eye care products with the goal of reducing the appearance of fine lines and supporting skin firmness.
Benefits
- May help reduce fine lines and wrinkles
- May improve skin firmness and elasticity
- Often used in eye care products for under-eye concerns
Science: Limited peer-reviewed data available for this ingredient. It is based on peptide chemistry principles used in cosmetics, but specific efficacy and safety studies in published literature are not readily documented.
Analyze Ingredient Further→ -
Water is the primary ingredient in most skincare products, serving as a base that dissolves and carries other active ingredients. It hydrates the skin surface and helps other beneficial compounds penetrate effectively.
Benefits
- Hydrates and plumps the skin
- Helps deliver other skincare ingredients
- Essential solvent for product formulation
Science: Water is a fundamental component of skin physiology and cosmetic formulations. No safety concerns exist for topical application; it is non-irritating and universally safe for all skin types.
Analyze Ingredient Further→ -
CI 42090, also known as Brilliant Blue or FD&C Blue No. 1, is a synthetic colorant used to give skincare products a blue tint. It serves no active skincare function and is included purely for visual appeal and product identification.
Potential concerns
- May cause allergic reactions or contact dermatitis in sensitive individuals
- Not recommended for those with known sensitivity to synthetic dyes
- Can stain skin or fabrics upon contact
Science: CI 42090 is approved for cosmetic use in the EU, US (as FD&C Blue No. 1), and most major markets. Limited peer-reviewed data exists on its dermal effects as a cosmetic colorant, though it has been used safely in food and pharmaceuticals for decades with a favorable safety profile.
Analyze Ingredient Further→ -
Ginger root extract is a botanical ingredient derived from the ginger plant, commonly used in skincare for its skin-conditioning properties. It's valued for its warming sensation and traditional use in supporting healthy skin.
Benefits
- Skin conditioning and moisturizing support
- Warming sensation that may improve circulation
- Antioxidant properties from natural compounds
Potential concerns
- May cause irritation or sensitization in sensitive skin types
- Can contain natural sensitizers (like citronellol) depending on extraction method and purity
- Risk increases if combined with other botanical ingredients containing similar irritants
Science: An Expert Panel for Cosmetic Ingredient Safety concluded that ginger root extract is safe in cosmetics at current use levels when formulated to be non-sensitizing, though they noted concern about potential sensitizing compounds in botanical extracts and recommend quality control to minimize impurities.
Analyze Ingredient Further→ -
Isononyl isononanoate is a lightweight synthetic oil derived from fatty acids, used in skincare products as an emollient to soften and smooth skin. It provides a silky texture without a greasy feel, making it popular in moisturizers, serums, and foundations.
Benefits
- Softens and conditions skin
- Provides lightweight moisture without heaviness
- Improves product texture and spreadability
Science: Research shows isononyl isononanoate has a very clean chemical profile with minimal volatile compounds—mainly just the ester itself and traces of isononyl alcohol from synthesis. It is well-tolerated in cosmetic formulations and considered safe for topical use.
Analyze Ingredient Further→ -
Camellia oleifera seed oil is a plant-based oil extracted from tea plant seeds, rich in fatty acids and antioxidants. In skincare, it works as a nourishing emollient that hydrates skin, reduces water loss, and may help even out skin tone.
Benefits
- Improves skin hydration and reduces transepidermal water loss (TEWL)
- Provides antioxidant protection
- May help inhibit melanin production, supporting even skin tone
- Non-irritating and suitable for sensitive skin formulations
Science: Clinical studies show camellia seed oil formulations reduce water loss and increase skin hydration for at least 10 hours after application without causing skin irritation. Research also demonstrates melanogenesis-inhibitory (skin-brightening) and antioxidant effects, though the full mechanisms are still being characterized.
Analyze Ingredient Further→ -
Diglycerin is a humectant derived from glycerin that works by drawing moisture from the air and deeper skin layers to the surface, helping your skin stay hydrated. It's a gentler, less sticky alternative to pure glycerin and is commonly used in lightweight moisturizers and serums.
Benefits
- Hydration and moisture retention
- Lightweight feel compared to glycerin
- Helps plump skin and reduce fine lines appearance
Science: Limited peer-reviewed data available for this ingredient. Diglycerin is generally recognized as safe in cosmetics and is a well-established humectant with a safety profile similar to glycerin, though specific efficacy studies are minimal.
Analyze Ingredient Further→ -
Castor seed oil is a natural oil extracted from castor plant seeds that acts as a skin conditioner and emulsifier in skincare products. It helps soften skin, stabilize formulas, and can provide mild UV protection.
Benefits
- Softens and conditions skin
- Helps stabilize product formulas
- Mild natural UV absorption
- Generally well-tolerated on skin
Potential concerns
- May enhance penetration of other ingredients through skin (can be beneficial or problematic depending on formula)
- Potential for sensitivity in individuals with castor seed allergies (rare)
Science: Multiple safety assessments by the Cosmetic Ingredient Review Expert Panel (2007, 2025) have concluded castor seed oil and related derivatives are safe for cosmetic use at typical concentrations. The oil is free of ricin (a toxic protein) because ricin does not partition into the oil during extraction. Animal and human safety data support its use in concentrations up to 81% in products like lipsticks.
Analyze Ingredient Further→ -
Titanium dioxide is a naturally occurring mineral that acts as a physical UV filter and colorant in skincare products. It sits on top of your skin to block and scatter both UVA and UVB rays, making it a key ingredient in mineral sunscreens and tinted moisturizers.
Benefits
- Provides broad-spectrum UV protection without chemical absorption
- Non-irritating option for sensitive skin and those prone to chemical sunscreen reactions
- Creates a brightening or mattifying effect on skin due to its white, reflective nature
Potential concerns
- Can leave a visible white cast on deeper skin tones
- May feel heavy or chalky if formulated poorly
- Nano-sized particles raise theoretical concerns, though topical use on intact skin is considered safe by major regulatory bodies
Science: Titanium dioxide is widely regarded as safe by the FDA, EU, and other regulators for use in cosmetics and sunscreens. Extensive safety data supports its use as a physical UV blocker; concerns about nano-particle inhalation apply primarily to manufacturing or inhaled exposure, not topical application on skin.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients