Ingredients
-
Analysis not yet available for this ingredient.
-
Butylene glycol is a humectant—a type of ingredient that draws water into the skin and helps it stay hydrated. It's a small, lightweight molecule commonly used in moisturizers to improve hydration without leaving a heavy feel on the skin.
Benefits
- Increases skin hydration and moisture retention
- Lightweight and absorbs quickly
- Helps other active ingredients penetrate the skin more effectively
Science: Research demonstrates that butylene glycol, when combined with other humectants (like glycerin and hyaluronic acid) and occlusive ingredients in moisturizers, significantly improves skin hydration in both healthy skin and compromised skin conditions such as atopic dermatitis. It is recognized as a safe, effective humectant in dermatological formulations.
Analyze Ingredient Further→ -
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Sodium lactate is a salt derived from lactic acid that acts as a humectant and pH buffer in skincare products. It helps draw moisture into the skin and maintain the product's stability.
Benefits
- Humectant that attracts and retains water in the skin
- Helps maintain skin hydration and plumpness
- Gentle pH buffer that stabilizes formulations
Science: Limited peer-reviewed data available specifically for topical skincare use. The provided research focuses on medical applications (intravenous use in shock treatment) and cellular mechanisms unrelated to cosmetic skincare; these do not directly inform safety or efficacy for topical skin application.
Analyze Ingredient Further→ -
Ethylhexylglycerin is a preservative and antimicrobial ingredient used to prevent bacterial growth and extend shelf life in skincare products. It's a multifunctional ingredient that helps keep formulations stable and free from contamination.
Benefits
- Prevents bacterial contamination in products
- Helps extend product shelf life
- Works synergistically with other preservatives for enhanced protection
Potential concerns
- May not be effective against all bacterial species (notably some Pseudomonas aeruginosa strains)
- Preservative-related sensitization possible in sensitive individuals, though uncommon
Science: Research shows ethylhexylglycerin has broad antimicrobial activity against many common cosmetic contaminants, though effectiveness varies by bacterial species. Studies demonstrate it can work synergistically with other preservative components to enhance biofilm inhibition.
Analyze Ingredient Further→ -
Lecithin is a naturally derived ingredient that acts as an emulsifier and skin conditioner in skincare products. It helps blend water and oil-based ingredients together and can improve the texture and feel of creams and lotions on your skin.
Benefits
- Helps create smooth, blended formulations
- Conditions and softens skin
- Improves product texture and spreadability
Science: The Cosmetic Ingredient Review Expert Panel concluded that lecithin and related phosphoglycerides are safe for use in cosmetics at concentrations up to 50%, based on comprehensive safety assessment. While lecithin can have physiological effects when ingested, these effects are not reproduced through topical skin application.
Analyze Ingredient Further→ -
Squalane is a lightweight, skin-identical oil derived from squalene (a natural component of human sebum). It absorbs easily into the skin to lock in moisture and create a smooth, soft feel without leaving a greasy residue.
Benefits
- Hydrates and moisturizes skin
- Mimics skin's natural oils for better compatibility
- Lightweight emollient that doesn't clog pores
- Antioxidant properties
- Well-tolerated by most skin types
Science: The Cosmetic Ingredient Review Expert Panel confirmed squalane is safe for cosmetic use at typical concentrations (2023). Research demonstrates skin hydrating and emollient activity, and squalane is naturally present in human sebum at ~13%, making it biocompatible with skin.
Analyze Ingredient Further→ -
Caprylic/Capric Triglyceride is a lightweight oil derived from coconut that acts as an emollient and helps formulations blend smoothly. It softens skin and reduces water loss by creating an occlusive barrier on the skin's surface.
Benefits
- Improves skin hydration and reduces transepidermal water loss (TEWL)
- Lightweight, non-greasy feel compared to heavier oils
- Helps deliver other active ingredients deeper into the skin
- Smooth, silky texture in skincare formulations
Science: Research shows that emulsions containing 15% caprylic/capric triglyceride significantly increase skin hydration and reduce water loss in healthy subjects. The ingredient is also used as an effective carrier oil in nanoemulsions to enhance penetration of active compounds into skin.
Analyze Ingredient Further→ -
Niacinamide is an active form of vitamin B3 that works within your skin's cells to strengthen the barrier, reduce inflammation, and regulate oil production. It's a water-soluble ingredient that's been shown to have multiple benefits across different skin concerns, from sensitivity to aging.
Benefits
- Reduces redness and calms irritation
- Minimizes pore appearance and controls excess oil
- Supports skin barrier function and hydration
- Brightens skin tone and evens complexion
- Has anti-aging properties and protects against environmental damage
Science: Niacinamide is well-tolerated and safe across diverse skin types with strong clinical evidence supporting its use for acne, dermatitis, and general skin health. Research shows it works by regulating inflammation at the cellular level and protecting skin barrier integrity, with proven efficacy in concentrations commonly found in cosmetic products.
Analyze Ingredient Further→ -
Sodium Hydroxide is a strong alkaline chemical used in skincare products primarily as a pH buffer to neutralize acids and adjust the product's pH to safe levels for skin. It is not an active skincare ingredient and appears only in trace amounts in finished products.
Potential concerns
- In concentrated form, sodium hydroxide is caustic and can cause severe chemical burns; however, in cosmetic products it is diluted and pH-buffered to safe levels
- Undiluted or highly concentrated sodium hydroxide should never contact skin directly
Science: The provided research discusses sodium hydroxide only in a specialized medical context (10% solution for surgical cauterization of ingrown toenails), which is not relevant to cosmetic skincare use. In properly formulated skincare products, sodium hydroxide is used in minimal concentrations solely for pH adjustment and is considered safe by regulatory bodies including the FDA and EU.
Analyze Ingredient Further→ -
Behenyl alcohol is a waxy, plant-derived fatty alcohol that acts as a thickener and emollient in skincare products. It helps create stable, creamy textures in formulations and can improve the feel and moisturizing properties of creams and lotions.
Benefits
- Thickens and stabilizes product texture
- Provides emollient properties for skin conditioning
- Helps reduce moisture loss from skin
- Creates a smooth, non-greasy feel in formulations
Science: Research from L'Oréal shows behenyl alcohol works effectively as a structure-building agent in oil-based skincare systems, particularly when combined with behenic acid. It forms stable crystalline networks in oils that enhance product stability and texture without irritation concerns.
Analyze Ingredient Further→ -
This is a synthetic polymer that acts as a thickener and film-former in skincare products. It helps create a smooth texture, improve product consistency, and can form a light protective layer on the skin's surface to help retain moisture.
Benefits
- Improves product texture and spreadability
- Helps retain moisture on skin
- Creates a smooth, even application
Science: Limited peer-reviewed data available for this ingredient. It is used widely in cosmetics as a safe thickening and film-forming agent, with no significant safety concerns reported in cosmetic safety databases.
Analyze Ingredient Further→ -
Sorbitan Isostearate is an emulsifier made from sorbitol (a natural sugar alcohol) and isostearic acid (a fatty acid). It helps blend oil and water-based ingredients together in skincare products, creating a smooth, stable texture.
Benefits
- Stabilizes product formulations by helping oil and water mix
- Creates smooth, pleasant texture in lotions and creams
- Generally well-tolerated in most skincare products
Potential concerns
- May cause mild to moderate skin irritation in sensitive individuals
- Rarely can trigger allergic contact dermatitis (less than 1% of people with contact sensitivity)
- Animal studies showed moderate irritation potential; use lower concentrations if sensitivity occurs
Science: The Cosmetic Ingredient Review Expert Panel concluded this ingredient is safe for cosmetic use under current practices (typically under 10% concentration). Clinical studies show it is generally a mild irritant and non-sensitizing in most users, though some individuals with sensitive skin may experience irritation.
Analyze Ingredient Further→ -
Palmitoyl Tetrapeptide-7 is a synthetic peptide (a short chain of amino acids) combined with palmitic acid, designed to signal skin cells to produce more collagen and support skin firmness. It's often marketed as a targeted anti-aging ingredient that may help reduce the appearance of fine lines and improve skin elasticity.
Benefits
- May support collagen production to improve skin firmness
- Potentially helps reduce the appearance of fine lines and wrinkles
- Generally well-tolerated by most skin types
Potential concerns
- Limited real-world testing data on effectiveness in typical skincare formulations
- May be irritating to very sensitive skin at high concentrations
- Peptides can be unstable and may lose potency depending on product formulation and storage
Science: Limited peer-reviewed data available for this specific ingredient. While peptides in general have shown promise in supporting skin health and collagen signaling, efficacy depends heavily on product formulation, concentration, and stability.
Analyze Ingredient Further→ -
Carbomer is a thickening agent and stabilizer that gives skincare products their gel-like texture. It helps create a smooth, spreadable consistency and can hold active ingredients in place on the skin for better absorption.
Benefits
- Creates a smooth, easy-to-apply gel texture
- Helps stabilize and thicken formulations
- Can improve how long active ingredients stay on the skin
- Allows better delivery of beneficial compounds into deeper skin layers
Potential concerns
- Can occasionally cause irritation or sensitivity in very reactive skin types
- Requires proper pH adjustment in formulations (formulators use this, not consumers)
Science: Research shows carbomer is commonly used as a gel base in advanced skincare delivery systems, including those designed for anti-inflammatory and healing treatments. Studies indicate it effectively works with active ingredients like nanoparticles and botanical extracts to improve their penetration and efficacy on skin.
Analyze Ingredient Further→ -
Shea butter is a natural fat extracted from the nuts of the African shea tree. In skincare, it works as a rich moisturizer and skin conditioning agent that helps soften and protect the skin barrier.
Benefits
- Deep moisturization and hydration
- Skin conditioning and softening
- May help improve skin texture and elasticity
Potential concerns
- May cause sensitivity or irritation in some individuals; formulations should be tested to ensure non-sensitizing properties
- Quality varies by source—impurities in poorly processed shea butter could potentially cause irritation
Science: A 2024 safety assessment by the Cosmetic Ingredient Review Expert Panel concluded that shea-derived ingredients are safe at current use levels and concentrations when formulated to be non-sensitizing. Formulators should monitor for impurities and be aware of cumulative botanical constituents in multi-ingredient products.
Analyze Ingredient Further→ -
Palmitoyl Tripeptide-1 (PT-1) is a peptide derived from amino acids that signals skin cells to boost collagen production. Research suggests it works particularly well when applied at night, aligning with your skin's natural repair cycle to support firmness and skin structure.
Benefits
- May promote collagen synthesis, particularly when applied at nighttime
- Could improve skin firmness and reduce the appearance of fine lines
- May enhance overall skin luminance and quality when used as part of a consistent routine
Science: A 2026 clinical trial (n=30) found that nightly PT-1 application synergistically improved collagen metabolism when combined with daytime baicalin, showing significant improvements in skin luminance (+16.29%), nasolabial fold depth (-36.35%), and firmness (+24.35%) over 8 weeks. The ingredient appears to work by boosting collagen synthesis during the skin's natural nighttime repair phase.
Analyze Ingredient Further→ -
Coco-Glucoside is a gentle, plant-derived cleanser made from coconut oil and glucose. It works by loosening and removing oil-based dirt and makeup from your skin without stripping away natural moisture.
Benefits
- Effective at removing oils and makeup at lower concentrations than harsher cleansers
- Gentle, non-ionic cleanser suitable for everyday use
- Works well when combined with other cleansing ingredients to boost effectiveness
Potential concerns
- Known contact allergen — can trigger allergic reactions in sensitive individuals and those with atopic skin
- Higher prevalence in products marketed as 'hypoallergenic' or 'for sensitive skin' despite being a recognized irritant for some people
- May cause allergic contact dermatitis, particularly in rinse-off products like cleansers and shampoos
Science: Recent research confirms coco-glucoside is an effective cleanser, particularly at removing oil-based soils, and performs best in low concentrations. However, it is classified as a known contact allergen and is surprisingly common in products marketed for sensitive skin, despite evidence that atopic and sensitive-skin individuals are most susceptible to glucoside-induced allergic reactions.
Analyze Ingredient Further→ -
Sodium Acrylates Copolymer is a synthetic polymer that acts as a thickener and film-former in skincare products. It helps create a smooth texture, improve product consistency, and can form a light protective layer on the skin's surface.
Benefits
- Improves product texture and spreadability
- Creates a light, breathable film on skin
- Helps stabilize formulations
Science: Limited peer-reviewed data available for this ingredient. It is listed as safe by regulatory bodies (FDA, EU) and has a long history of use in cosmetics with low sensitization potential.
Analyze Ingredient Further→ -
Ceramide NG is a naturally-derived lipid (fat) that mimics ceramides found in your skin's outer layer. It helps repair and strengthen your skin barrier, which reduces water loss and keeps skin hydrated and protected.
Benefits
- Strengthens skin barrier function
- Reduces transepidermal water loss (TEWL)
- Improves skin hydration and softness
- Helps soothe dry, irritated, or sensitive skin
Science: Ceramides are well-established in skincare science as key structural components of the skin barrier. While limited peer-reviewed data exists specifically for Ceramide NG, the broader ceramide ingredient class has strong evidence supporting barrier repair and hydration benefits in numerous clinical studies.
Analyze Ingredient Further→ -
Tetrasodium Glutamate Diacetate is a chelating agent that binds to metal ions (like calcium and iron) in skincare formulations, preventing them from causing unwanted chemical reactions or product degradation. It helps keep products stable and effective over time.
Benefits
- Stabilizes skincare formulations by controlling metal ion activity
- Helps prevent product discoloration and oxidation
- Allows products to maintain consistency and efficacy during storage
Science: The Cosmetic Ingredient Review Expert Panel concluded in 2025 that Tetrasodium Glutamate Diacetate is safe for use in cosmetics at typical concentrations. Research shows it functions effectively as a chelator, with strong binding capacity for metals like calcium and iron.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients