Ingredients
-
Analysis not yet available for this ingredient.
-
Butylene glycol is a humectant—a type of ingredient that draws water into the skin and helps it stay hydrated. It's a small, lightweight molecule commonly used in moisturizers to improve hydration without leaving a heavy feel on the skin.
Benefits
- Increases skin hydration and moisture retention
- Lightweight and absorbs quickly
- Helps other active ingredients penetrate the skin more effectively
Science: Research demonstrates that butylene glycol, when combined with other humectants (like glycerin and hyaluronic acid) and occlusive ingredients in moisturizers, significantly improves skin hydration in both healthy skin and compromised skin conditions such as atopic dermatitis. It is recognized as a safe, effective humectant in dermatological formulations.
Analyze Ingredient Further→ -
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Sodium hyaluronate is the salt form of hyaluronic acid, a naturally occurring substance found in your skin that acts like a moisture magnet. In skincare products, it absorbs water from the environment and binds it to your skin, helping to hydrate and plump the skin's surface.
Benefits
- Delivers intense hydration to the skin
- Helps reduce the appearance of fine lines by improving skin moisture
- Supports skin barrier function
- Suitable for all skin types, including sensitive and oily skin
Potential concerns
- In very dry climates with low humidity, it may draw moisture from deeper skin layers if not sealed with an occlusive product
- Rare allergic reactions are possible but extremely uncommon
Science: While the provided research focuses on intra-articular injections for joint health (showing good safety and efficacy), hyaluronic acid and its salt form are well-established in dermatology for topical hydration. The molecule's safety profile is well-documented across decades of use in medical and cosmetic applications, with severe adverse reactions being extremely rare.
Analyze Ingredient Further→ -
Sodium benzoate is a preservative used in skincare products to prevent bacterial and fungal growth, extending shelf life. It's a salt derived from benzoic acid and is one of the most widely used preservatives in cosmetics, skincare, and food products.
Benefits
- Prevents microbial contamination and extends product shelf life
- Generally effective at low concentrations (0.1-0.5%)
- Approved for cosmetic use by major regulatory bodies
Potential concerns
- Can cause allergic contact dermatitis in sensitive individuals; identified as an allergen in medical hand cleansers
- Recent research suggests long-term oral intake may affect bone health and increase osteoporosis risk, though topical skincare exposure is minimal
Science: Sodium benzoate is well-established as a safe preservative in cosmetics at typical use levels. However, emerging research indicates that chronic systemic intake may interfere with bone metabolism through the FGF2/p38/RUNX2 pathway. For topical skincare use, the exposure and absorption are minimal compared to dietary intake, but individuals with known sensitivities should avoid it.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Kaolin is a naturally occurring clay mineral that works as an absorbent in skincare products. It helps remove excess oil and impurities from the skin's surface, making it a popular ingredient in masks and cleansers, particularly for oily or combination skin types.
Benefits
- Absorbs excess sebum and oil from skin
- Gentle physical exfoliant that removes dead skin cells
- Helps purify pores and reduce appearance of blemishes
- Soothing and calming for irritated skin
Potential concerns
- May be drying if used excessively or on already dry skin
- Can cause mild irritation in sensitive individuals
- May leave a slight residue or chalky feel if not rinsed thoroughly
Science: Kaolin is a well-established pharmaceutical and cosmetic ingredient with multiple documented applications in skincare, including oil absorption, skin protection, and anti-inflammatory properties. It has a long history of safe topical use and is recognized as biocompatible with minimal toxicity concerns.
Analyze Ingredient Further→ -
Sodium Hydroxide is a strong alkaline chemical used in skincare products primarily as a pH buffer to neutralize acids and adjust the product's pH to safe levels for skin. It is not an active skincare ingredient and appears only in trace amounts in finished products.
Potential concerns
- In concentrated form, sodium hydroxide is caustic and can cause severe chemical burns; however, in cosmetic products it is diluted and pH-buffered to safe levels
- Undiluted or highly concentrated sodium hydroxide should never contact skin directly
Science: The provided research discusses sodium hydroxide only in a specialized medical context (10% solution for surgical cauterization of ingrown toenails), which is not relevant to cosmetic skincare use. In properly formulated skincare products, sodium hydroxide is used in minimal concentrations solely for pH adjustment and is considered safe by regulatory bodies including the FDA and EU.
Analyze Ingredient Further→ -
Ascorbyl Glucoside is a stable form of vitamin C that's been chemically modified to last longer in skincare products. Once absorbed into the skin, your body converts it into active vitamin C, which helps brighten skin tone, reduce the appearance of dark spots, and support overall skin health.
Benefits
- Helps fade dark spots and uneven pigmentation (solar lentigos)
- Brightens overall skin tone and improves radiance
- More stable than standard vitamin C, so it stays effective longer in products
- Antioxidant protection against environmental damage
Science: Clinical research demonstrates that ascorbyl glucoside-arginine complex significantly reduced pigmentation in sun spots after 24 weeks of twice-daily use, with visible lightening effects and no reported adverse effects or unwanted skin bleaching. The ingredient is well-tolerated and considered a safe, effective alternative to less stable vitamin C forms.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Bifida Ferment Lysate is a fermented ingredient derived from Bifida bacteria that has been broken down into smaller, skin-absorbable components. It's used in skincare to support skin hydration and may help with skin barrier function and reducing irritation.
Benefits
- Improves skin hydration when used in short-term treatments (under 25 minutes)
- May help reduce redness and calm irritated skin
- Supports skin barrier function and moisture retention
- Generally well-tolerated in acne-prone skin formulations
Potential concerns
- Prolonged exposure (over 25 minutes) may paradoxically increase dryness and redness
- May cause mild redness in sensitive individuals, particularly with extended use
Science: Recent clinical studies show this ingredient effectively improves skin hydration and activates aquaporin-3 (water channel) expression in the skin when used short-term. However, prolonged application (over 25 minutes) can lead to increased dryness and irritation, suggesting moderation is key for optimal results.
Analyze Ingredient Further→ -
Hydrolyzed algin is a thickening and moisture-binding ingredient derived from brown seaweed. It forms a lightweight film on the skin to help retain hydration and improve product texture.
Benefits
- Hydration and moisture retention
- Improved product texture and spreadability
- Skin-soothing properties
Science: Limited peer-reviewed data available for this ingredient. Algin derivatives are well-established as safe, non-toxic ingredients in cosmetics with a long history of use in skincare formulations.
Analyze Ingredient Further→ -
Sodium polyacrylate is a synthetic polymer that absorbs and holds water, creating a gel-like texture. In skincare, it's used as a thickener and moisture-retention agent to improve product consistency and help keep skin hydrated.
Benefits
- Absorbs and retains moisture to support skin hydration
- Thickens product texture for better application and feel
- Creates a smooth, spreadable consistency in formulations
Science: Contact dermatitis research involving multiple UK hospital dermatology centres found that sensitisation to sodium polyacrylate is rare, indicating excellent safety for topical skincare use. The ingredient has also been studied for advanced biomedical applications including wearable sensors, demonstrating its biocompatibility.
Analyze Ingredient Further→ -
Isononyl isononanoate is a lightweight synthetic oil derived from fatty acids, used in skincare products as an emollient to soften and smooth skin. It provides a silky texture without a greasy feel, making it popular in moisturizers, serums, and foundations.
Benefits
- Softens and conditions skin
- Provides lightweight moisture without heaviness
- Improves product texture and spreadability
Science: Research shows isononyl isononanoate has a very clean chemical profile with minimal volatile compounds—mainly just the ester itself and traces of isononyl alcohol from synthesis. It is well-tolerated in cosmetic formulations and considered safe for topical use.
Analyze Ingredient Further→ -
Biosaccharide Gum-1 is a natural polymer derived from fermented sugars that works as a thickener and stabilizer in skincare formulas. It helps create a smooth texture and can form a light film on the skin to help retain moisture.
Benefits
- Improves product texture and consistency
- Helps hydrate and retain skin moisture
- Creates a light, breathable protective layer
Science: Limited peer-reviewed data available for this ingredient. Biosaccharide gums are generally recognized as safe cosmetic thickeners with low irritation potential, though comprehensive safety studies specific to Biosaccharide Gum-1 are not widely published.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients