Ingredients
-
Analysis not yet available for this ingredient.
-
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Tocopheryl acetate is a stable form of vitamin E, a fat-soluble antioxidant that helps protect skin from damage caused by free radicals and oxidative stress. It's commonly used in skincare products because it's more shelf-stable than other vitamin E forms and may help support the skin's natural barrier function.
Benefits
- Antioxidant protection against environmental damage
- Supports skin barrier health
- Stable ingredient with good shelf life in formulations
Science: Tocopheryl acetate is a well-established vitamin E ester that the body converts to free vitamin E for use. Research shows it functions as a lipid-soluble antioxidant; one recent study found it contributed to a moisturizer's beneficial effects on skin microbiota balance in atopic dermatitis models, though more direct clinical evidence on topical efficacy is limited.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Squalane is a lightweight, skin-identical oil derived from squalene (a natural component of human sebum). It absorbs easily into the skin to lock in moisture and create a smooth, soft feel without leaving a greasy residue.
Benefits
- Hydrates and moisturizes skin
- Mimics skin's natural oils for better compatibility
- Lightweight emollient that doesn't clog pores
- Antioxidant properties
- Well-tolerated by most skin types
Science: The Cosmetic Ingredient Review Expert Panel confirmed squalane is safe for cosmetic use at typical concentrations (2023). Research demonstrates skin hydrating and emollient activity, and squalane is naturally present in human sebum at ~13%, making it biocompatible with skin.
Analyze Ingredient Further→ -
Caprylic/Capric Triglyceride is a lightweight oil derived from coconut that acts as an emollient and helps formulations blend smoothly. It softens skin and reduces water loss by creating an occlusive barrier on the skin's surface.
Benefits
- Improves skin hydration and reduces transepidermal water loss (TEWL)
- Lightweight, non-greasy feel compared to heavier oils
- Helps deliver other active ingredients deeper into the skin
- Smooth, silky texture in skincare formulations
Science: Research shows that emulsions containing 15% caprylic/capric triglyceride significantly increase skin hydration and reduce water loss in healthy subjects. The ingredient is also used as an effective carrier oil in nanoemulsions to enhance penetration of active compounds into skin.
Analyze Ingredient Further→ -
Titanium dioxide is a white mineral powder that sits on top of your skin to physically block and scatter ultraviolet (UV) rays before they can cause damage. It's commonly used as the active ingredient in mineral or physical sunscreens.
Benefits
- Provides broad-spectrum UV protection (UVA and UVB)
- Less likely to irritate sensitive skin compared to chemical sunscreen filters
- Starts protecting immediately upon application without needing to absorb into skin
Potential concerns
- Can leave a white or chalky cast on skin, especially in higher concentrations or on darker skin tones
- May feel heavy or thick in formulations
- In powder form, inhalation of particles has raised occupational safety concerns, though skincare use is considered safe
Science: Titanium dioxide is approved as a safe sunscreen active ingredient by the FDA and is considered non-irritating and photostable. The EU and regulatory bodies have confirmed safety for cosmetic use; concerns about nanoparticle penetration have been largely addressed by evidence showing minimal skin penetration of typical formulation sizes.
Analyze Ingredient Further→ -
Neopentyl Glycol Diheptanoate is a synthetic emollient and skin-conditioning agent that helps soften and smooth the skin. It's an ester made from neopentyl glycol and heptanoic acid, commonly used in cosmetics to improve texture and spreadability of formulations.
Benefits
- Softens and conditions skin
- Improves product texture and ease of application
- Lightweight emollient that doesn't feel greasy
Science: Research demonstrates that Neopentyl Glycol Diheptanoate can be synthesized through enzymatic pathways with high purity (95% conversion) without additional purification steps, supporting its safety profile for cosmetic use. Limited peer-reviewed safety or efficacy data specifically addressing this ingredient's performance on human skin.
Analyze Ingredient Further→ -
Polyglyceryl-10 Laurate is a gentle, plant-derived emulsifier and solubilizer that helps blend water and oil-based ingredients together in skincare formulas. It also helps deliver other active ingredients more effectively into the skin by improving their stability and absorption.
Benefits
- Helps dissolve and stabilize hard-to-mix ingredients like plant extracts and oils
- Improves the effectiveness of active ingredients through better delivery
- Mild and well-tolerated by most skin types
- Enables creation of lightweight, non-greasy formulations
Science: Research shows polyglyceryl-10 laurate effectively solubilizes botanical extracts and encapsulates unstable active ingredients like bakuchiol, improving their stability in aqueous formulations without compromising their beneficial properties.
Analyze Ingredient Further→ -
Polyglyceryl-10 Myristate is a gentle emulsifier and solubilizer derived from plant-based glycerin and myristic acid. It helps blend water and oil-based ingredients together and can improve how certain plant extracts dissolve in skincare formulas, making them more effective.
Benefits
- Helps stabilize and blend different product ingredients
- Can improve the absorption and effectiveness of plant extracts like rosemary
- Mild, plant-derived alternative to synthetic emulsifiers
Science: Research shows polyglyceryl-10 myristate effectively solubilizes plant extracts (like rosemary) in water-based systems, enhancing their bioavailability in cosmetic formulations. It is recognized as a safe, mild emulsifier suitable for skincare applications.
Analyze Ingredient Further→ -
Isododecane is a lightweight, colorless liquid hydrocarbon used as a solvent and carrier in skincare formulations. It helps dissolve and deliver other active ingredients, particularly oil-soluble compounds like UV filters and silicone polymers, while providing a smooth, non-greasy feel on the skin.
Benefits
- Serves as an effective solvent for oil-soluble actives and UV absorbers
- Enables efficient delivery of ingredients into the skin
- Provides a light, non-occlusive texture in formulations
Science: Research demonstrates that isododecane is a suitable solvent for UV-absorbing sunscreen ingredients and supports effective topical delivery of active compounds through the skin. It is commonly used in pharmaceutical and cosmetic formulations without documented safety concerns at typical use levels.
Analyze Ingredient Further→ -
Polymethylsilsesquioxane is a silica-based powder derived from silicon that acts as a lightweight filler and texture enhancer in skincare products. It helps absorb oils, create a smooth matte finish, and improve how products feel and spread on the skin.
Benefits
- Creates a smooth, velvety texture on skin
- Helps absorb excess oil and sebum
- Provides a matte finish without a heavy feel
- Improves product spreadability and blendability
Science: Recent research confirms polymethylsilsesquioxane is a hydrophobic silica polymer with high biocompatibility, synthesized using non-toxic methods. Its safety profile aligns with established silica filler use in cosmetics, though direct dermatological safety studies in skincare formulations are limited.
Analyze Ingredient Further→ -
Bisabolol is a naturally occurring compound found in chamomile and other plants, known for its soothing and anti-inflammatory properties. It's used in skincare products to calm irritated skin and reduce redness.
Benefits
- Reduces inflammation and redness
- Soothes irritated or sensitive skin
- Antimicrobial and antifungal properties
- May help manage conditions like seborrheic dermatitis when used in appropriate formulations
Potential concerns
- Rare allergic sensitization possible, particularly in individuals sensitive to chamomile or related plants
Science: Bisabolol is recognized as a safe, plant-derived ingredient and is included in medical device shampoos for inflammatory scalp conditions alongside antifungal agents. It has a long history of use in chamomile products, which are designated 'generally recognized as safe' (GRAS) by the FDA.
Analyze Ingredient Further→ -
Hyaluronic acid is a naturally occurring molecule found in your skin that acts like a sponge, holding water to keep skin hydrated and plump. In skincare products, it helps improve skin moisture, reduce the appearance of fine lines, and support overall skin texture and firmness.
Benefits
- Boosts skin hydration and moisture retention
- Helps reduce the appearance of fine lines and wrinkles
- Supports skin firmness and elasticity
- Well-tolerated and safe for most skin types
- May enhance effects of other anti-aging treatments
Science: Multiple clinical studies confirm hyaluronic acid is highly effective and well-tolerated for improving skin hydration and signs of aging. Research shows it works as an effective standalone treatment and also enhances results when combined with other anti-aging procedures, with benefits sustained over extended use periods.
Analyze Ingredient Further→ -
C13-15 Alkane is a lightweight, colorless oil derived from petroleum that acts as an emollient and texture enhancer in skincare products. It helps soften and smooth the skin while giving products a silky, non-greasy feel.
Benefits
- Lightweight moisturizing without heavy residue
- Improves product spreadability and smooth application
- Creates a silky skin feel
Science: Limited peer-reviewed data available for this ingredient. It is generally recognized as safe by regulatory bodies (including the FDA) for use in cosmetics and is non-irritating for most skin types.
Analyze Ingredient Further→ -
Argania Spinosa Kernel Oil, commonly known as argan oil, is a natural oil extracted from the kernels of the argan tree. It's rich in fatty acids and antioxidants, and is used in skincare products to moisturize and nourish the skin.
Benefits
- Deep moisturization and skin nourishment
- Anti-inflammatory properties that may help reduce skin irritation and redness
- Antioxidant content that may help protect skin from environmental damage
Potential concerns
- Oxidative stability concerns: argan oil degrades relatively quickly when exposed to heat or sunlight, so products should be stored properly and used within 6 months for best quality
- May not be suitable for very acne-prone skin due to its occlusive nature, though this varies by individual
Science: Clinical studies show argan oil as part of multi-ingredient formulations is safe and effective for treating inflammatory skin conditions, with no reported adverse effects. However, the ingredient's stability is a concern—argan oil loses quality quickly at warm temperatures or in sunlight, so proper storage and formulation are important for maintaining efficacy.
Analyze Ingredient Further→ -
Dextrin Palmitate is a synthetic ingredient made by combining dextrin (a carbohydrate derived from starch) with palmitic acid (a fatty acid). In skincare, it functions as an emollient and texture enhancer, helping to soften skin and improve how products feel on application.
Benefits
- Softens and smooths skin texture
- Improves product spreadability and feel
- Adds mild moisturizing properties
Science: Limited peer-reviewed data available for this ingredient. It is generally recognized as safe in cosmetic formulations based on the safety profiles of its component parts (dextrin and palmitic acid), but specific clinical studies on Dextrin Palmitate itself are scarce.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Cetyl ethylhexanoate is a lightweight oil derived from natural sources that functions as a skin-conditioning agent and emollient in skincare formulations. It helps soften and smooth the skin while also serving as a functional component that stabilizes emulsions and improves product texture.
Benefits
- Softens and conditions skin
- Improves product texture and spreadability
- Helps stabilize emulsions for better product performance
- Lightweight feel without heaviness
Potential concerns
- When formulated incorrectly, products containing this ingredient may cause irritation; formulations should be tested to ensure non-irritating concentrations
- Generally safe at typical use levels (up to 52% in leave-on products like lipsticks, and 77.3% in rinse-off formulations)
Science: The Cosmetic Ingredient Review Expert Panel concluded this ingredient is safe in cosmetic formulations at current use levels when properly formulated to be non-irritating. Recent research (2024) demonstrates its role in advanced emulsion technology, where it helps create stable, thickened skincare products with enhanced cleansing and usability properties.
Analyze Ingredient Further→ -
Iron Oxides (CI 77491) is a naturally occurring mineral pigment used to add color to skincare and cosmetic products. In the context listed (CI 77491 is red iron oxide), it provides red, brown, or yellow tones depending on the specific iron oxide type. It sits on the skin's surface and does not penetrate deeply.
Benefits
- Provides color to cosmetic formulations
- Well-tolerated by most skin types
- Does not require preservatives as it is a mineral
Potential concerns
- May cause irritation in people with sensitive skin or known sensitivities to iron oxide
- Can stain skin or fabrics if used in high concentrations
- Potential for contamination if sourced impurely, though cosmetic-grade versions are regulated
Science: Iron oxides are widely approved for use in cosmetics by regulatory bodies including the FDA and EU. Limited peer-reviewed data exists specifically on iron oxides in skincare, but their long history of safe use in color cosmetics and their mineral nature support a strong safety profile for topical application.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Homosalate is a chemical UV filter that absorbs UVB rays to protect skin from sun damage. It's commonly used in sunscreens and is often combined with other UV-blocking ingredients for broader protection.
Benefits
- Absorbs UVB radiation to help prevent sunburn
- Lightweight and works well in various sunscreen formulations
- Allows for flexible product formats (lotions, sprays, etc.)
Potential concerns
- Systemic absorption occurs—research shows it enters the bloodstream at levels exceeding FDA's 0.5 ng/mL threshold after a single application
- Long-term effects of systemic absorption are not yet fully understood
- May cause skin irritation or allergic contact dermatitis in sensitive individuals
Science: A 2020 FDA-led clinical trial found that homosalate, along with five other common sunscreen actives, is systemically absorbed and exceeds the FDA's recommended safety threshold (0.5 ng/mL) after a single application. While this absorption is documented, the clinical significance and long-term health implications remain under investigation.
Analyze Ingredient Further→ -
Octisalate is a chemical UV filter used in sunscreens to absorb ultraviolet (UVB) light and help protect skin from sun damage. It works by converting UV rays into heat that dissipates from the skin.
Benefits
- Provides UVB sun protection
- Lightweight and less visible on skin than mineral filters
- Compatible with many other skincare ingredients
Potential concerns
- Systemic absorption detected in blood after single application; all participants exceeded FDA's 0.5 ng/mL threshold on day 1
- Long-term health effects of systemic absorption remain unclear and require further study
- May cause skin irritation or allergic contact dermatitis in sensitive individuals
Science: A 2020 FDA-led clinical trial found that octisalate is absorbed systemically into the bloodstream after topical sunscreen application, with measurable plasma concentrations exceeding regulatory thresholds. The long-term safety implications of this absorption are not yet fully established, and additional research is ongoing.
Analyze Ingredient Further→ -
Octocrylene is an organic UV filter that absorbs ultraviolet radiation, primarily UVB and short-wavelength UVA rays. It's commonly used in sunscreens and other cosmetic products to provide sun protection and prevent UV damage to skin and product formulations.
Benefits
- Provides UVB and short-wavelength UVA sun protection
- Works synergistically with other UV filters (notably stabilizes avobenzone)
- Feels pleasant on skin, which encourages regular sunscreen use
- Helps prevent skin cancer and UV-induced skin damage
Potential concerns
- Potential allergic or photoallergic reactions in sensitive individuals
- Concerns about possible endocrine system effects (currently under ongoing regulatory assessment)
- Not a complete broad-spectrum protector on its own (limited UVA coverage)
Science: Recent research indicates octocrylene is stable and provides UV protection with minimal adverse effects compared to other organic filters like oxybenzone. However, potential endocrine concerns have been raised and the ingredient remains under continuous safety review by regulatory agencies including the European Chemical Agency.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Methyl methacrylate crosspolymer is a synthetic polymer used primarily as a thickening and film-forming agent in skincare formulations. It helps create texture and consistency in products while potentially supporting preservative effectiveness.
Benefits
- Improves product texture and spreadability
- Creates a light film on skin
- May enhance preservative performance, allowing lower preservative levels in formulations
Potential concerns
- Limited safety data specific to skin application in published literature
- Synthetic polymer — may cause sensitivity in those with polymer sensitivities, though this is rare
Science: Research shows that methyl methacrylate crosspolymer at high concentrations (50,000 ppm) can reduce the effectiveness of common preservatives like 1,2-hexanediol against bacteria and fungi, suggesting it may interfere with preservative function rather than support it. Limited peer-reviewed data exists on direct skin safety and efficacy at typical use levels.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients