Ingredients
-
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Citric acid is a naturally occurring organic acid commonly used in skincare products as an exfoliant and pH balancer. It belongs to a group of ingredients called alpha-hydroxy acids (AHAs) that help remove dead skin cells from the surface.
Benefits
- Gentle exfoliation to improve skin texture and appearance
- Helps reduce the appearance of keratosis and acne
- Balances product pH to maintain skin compatibility
Potential concerns
- Can cause irritation, redness, or sensitivity in some users, especially with prolonged or frequent use
- May increase sun sensitivity — sunscreen use is recommended when using AHA products
- Not suitable for very sensitive or compromised skin without caution
Science: Citric acid is an established AHA used in cosmetics for superficial peeling and skin appearance improvement, though research emphasizes that caution should be exercised due to potential adverse reactions. It is widely produced industrially and well-established in skincare formulations.
Analyze Ingredient Further→ -
Tocopherol is a form of vitamin E, a fat-soluble antioxidant that protects skin from damage caused by free radicals and oxidative stress. It helps maintain skin's natural barrier function and is commonly used in skincare products to prevent premature aging and support overall skin health.
Benefits
- Protects skin from free radical damage and oxidative stress
- Supports skin barrier function and moisture retention
- May help reduce signs of aging caused by UV exposure and environmental damage
- Works as a lipid antioxidant to prevent degradation of skin oils
Science: Tocopherol (α-tocopherol) is recognized in peer-reviewed research as a key endogenous defense mechanism against oxidative stress in aging skin, particularly from UV-induced damage. Studies confirm it functions as a lipid-soluble antioxidant capable of preventing lipid peroxidation, with established efficacy in cosmetic and therapeutic applications.
Analyze Ingredient Further→ -
Ethylhexylglycerin is a preservative and antimicrobial ingredient used to prevent bacterial growth and extend shelf life in skincare products. It's a multifunctional ingredient that helps keep formulations stable and free from contamination.
Benefits
- Prevents bacterial contamination in products
- Helps extend product shelf life
- Works synergistically with other preservatives for enhanced protection
Potential concerns
- May not be effective against all bacterial species (notably some Pseudomonas aeruginosa strains)
- Preservative-related sensitization possible in sensitive individuals, though uncommon
Science: Research shows ethylhexylglycerin has broad antimicrobial activity against many common cosmetic contaminants, though effectiveness varies by bacterial species. Studies demonstrate it can work synergistically with other preservative components to enhance biofilm inhibition.
Analyze Ingredient Further→ -
Lecithin is a naturally derived ingredient that acts as an emulsifier and skin conditioner in skincare products. It helps blend water and oil-based ingredients together and can improve the texture and feel of creams and lotions on your skin.
Benefits
- Helps create smooth, blended formulations
- Conditions and softens skin
- Improves product texture and spreadability
Science: The Cosmetic Ingredient Review Expert Panel concluded that lecithin and related phosphoglycerides are safe for use in cosmetics at concentrations up to 50%, based on comprehensive safety assessment. While lecithin can have physiological effects when ingested, these effects are not reproduced through topical skin application.
Analyze Ingredient Further→ -
Titanium dioxide is a naturally occurring mineral that works as a physical UV filter and opacifying agent in skincare products. It sits on the skin's surface and reflects and scatters UV rays to provide broad-spectrum sun protection, and is also commonly used in foundations and powders to create coverage and a matte finish.
Benefits
- Provides broad-spectrum UVA and UVB protection
- Physical (non-chemical) sun filter suitable for sensitive skin
- Helps create opaque, matte finishes in makeup and tinted products
Potential concerns
- May leave a white cast on darker skin tones due to its opacity
- Can feel slightly heavy or occlusive on very oily skin types
- Rarely, inhalation of airborne powder particles may be a concern in occupational settings, though not in typical consumer use
Science: Titanium dioxide has a long history of safe use in cosmetics and is approved by the FDA, EU, and other major regulatory bodies as a sunscreen active ingredient. It is considered non-toxic and non-penetrating when applied topically in skincare products.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
CI 77499 is iron oxides (specifically black iron oxide), a mineral colorant approved for use in cosmetics. It's primarily used to add color and pigmentation to skincare and makeup products, and may have mild antioxidant properties.
Benefits
- Provides stable color to products
- Iron oxides are generally well-tolerated on skin
Potential concerns
- Minimal risks for topical use; not an irritant or sensitizer for most people
- May accumulate in pores if used in heavy formulations, though this is rare
Science: Iron oxides are approved colorants in cosmetics by regulatory bodies including the FDA and EU. Limited peer-reviewed data specifically evaluates CI 77499, but iron oxides have a long history of safe use in color cosmetics with no significant safety concerns identified.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Caprylic/Capric Triglyceride is a lightweight oil derived from coconut that acts as an emollient and helps formulations blend smoothly. It softens skin and reduces water loss by creating an occlusive barrier on the skin's surface.
Benefits
- Improves skin hydration and reduces transepidermal water loss (TEWL)
- Lightweight, non-greasy feel compared to heavier oils
- Helps deliver other active ingredients deeper into the skin
- Smooth, silky texture in skincare formulations
Science: Research shows that emulsions containing 15% caprylic/capric triglyceride significantly increase skin hydration and reduce water loss in healthy subjects. The ingredient is also used as an effective carrier oil in nanoemulsions to enhance penetration of active compounds into skin.
Analyze Ingredient Further→ -
Sodium Hydroxide is a strong alkaline chemical used in skincare products primarily as a pH buffer to neutralize acids and adjust the product's pH to safe levels for skin. It is not an active skincare ingredient and appears only in trace amounts in finished products.
Potential concerns
- In concentrated form, sodium hydroxide is caustic and can cause severe chemical burns; however, in cosmetic products it is diluted and pH-buffered to safe levels
- Undiluted or highly concentrated sodium hydroxide should never contact skin directly
Science: The provided research discusses sodium hydroxide only in a specialized medical context (10% solution for surgical cauterization of ingrown toenails), which is not relevant to cosmetic skincare use. In properly formulated skincare products, sodium hydroxide is used in minimal concentrations solely for pH adjustment and is considered safe by regulatory bodies including the FDA and EU.
Analyze Ingredient Further→ -
Xanthan gum is a natural thickener derived from fermented bacteria that helps give skincare products a smooth, gel-like texture. It stabilizes formulas and prevents ingredients from separating, while also helping products spread evenly on skin.
Benefits
- Creates smooth, pleasant texture
- Stabilizes emulsions and prevents separation
- Improves product spreadability and application
Science: Xanthan gum is an FDA-approved, anionic polysaccharide with a long history of safe use across food, pharmaceutical, and cosmetic industries since 1969. Its performance as a thickener and stabilizer is well-established in scientific literature, with no notable skin irritation concerns reported.
Analyze Ingredient Further→ -
Tin Oxide is a mineral powder used in cosmetics primarily as a colorant and opacifying agent to create a smooth, matte finish in powders and foundations. It's an inert mineral that sits on top of the skin rather than being absorbed.
Benefits
- Provides opacity and coverage in powder formulations
- Creates a matte or satin finish
- Inert and unlikely to cause irritation in topical skincare use
Potential concerns
- Inhalation of powder particles should be avoided; inhaling tin oxide dust in industrial settings has been linked to lung concerns, though cosmetic powder use is a different exposure route
- No significant skin or eye irritation reported in normal cosmetic use
Science: The available research focuses on occupational inhalation hazards in industrial manufacturing rather than cosmetic use on skin. Tin oxide is poorly soluble and remains on the skin surface, making systemic absorption unlikely from topical application. Limited peer-reviewed data specifically addresses safety in finished skincare products.
Analyze Ingredient Further→ -
Synthetic fluorphlogopite is a mineral-derived ingredient made from magnesium silicate. It works as a bulking agent and thickener in cosmetic formulas, helping to create the right texture and consistency in products like foundations, powders, and creams.
Benefits
- Thickens and stabilizes product texture
- Improves spreadability and application
- Provides a smooth, even finish
Science: The Cosmetic Ingredient Review Expert Panel evaluated synthetic fluorphlogopite and concluded it is safe for use in cosmetics at typical concentrations. The ingredient has a well-established safety profile similar to other magnesium silicates used in skincare.
Analyze Ingredient Further→ -
Sunflower seed oil is a natural plant oil extracted from sunflower seeds. In skincare, it acts as a moisturizer and emollient, helping to soften and hydrate the skin while forming a protective barrier on the skin's surface.
Benefits
- Hydration and moisturizing
- Skin softening and smoothing
- Rich in antioxidants and vitamin E
Science: Recent research shows sunflower oil does not trigger cross-reactivity with common allergens like nickel or Compositae plant allergens, supporting its safety profile for sensitive skin. It is well-tolerated and has a long history of safe use in cosmetics.
Analyze Ingredient Further→ -
Glyceryl stearate is a natural emulsifier and thickener derived from vegetable oils and glycerin. It helps bind water and oil together in skincare formulas, creating a smooth texture while providing mild moisturizing properties.
Benefits
- Helps create stable, smooth product textures
- Mild emollient that softens skin
- Derived from natural sources (vegetable-based)
Science: The Cosmetic Ingredient Review Expert Panel confirmed in 2023 that glyceryl stearate and related glyceryl diesters are safe for cosmetic use at standard concentrations. Research indicates the ingredient has a skin-safe pH profile and demonstrates good stability in formulations.
Analyze Ingredient Further→ -
Cetearyl alcohol is a waxy, fatty alcohol derived from vegetable or petroleum sources that acts as an emulsifier and thickener in skincare products. It helps blend oil and water-based ingredients together and gives creams and lotions their smooth, spreadable texture.
Benefits
- Stabilizes emulsions to prevent separation of oil and water
- Thickens and improves texture of creams and lotions
- Creates a smooth, non-greasy feel on skin
Potential concerns
- Rare allergic contact dermatitis reported in sensitive individuals
- May cause localized irritation or allergic reactions in patch-tested cases
Science: Cetearyl alcohol is widely used as an emulsifier in topical formulations and generally has a good safety profile. However, multiple case reports document allergic contact dermatitis in susceptible individuals, suggesting it can act as a contact allergen in rare cases. It does not significantly penetrate skin and primarily remains in the formulation.
Analyze Ingredient Further→ -
Ascorbyl palmitate is a stabilized form of vitamin C (ascorbic acid) that's designed to be more shelf-stable and easier to formulate into skincare products than pure vitamin C. It works as an antioxidant to help protect skin from environmental damage and may support anti-aging benefits.
Benefits
- Antioxidant protection against free radicals
- May help reduce appearance of fine lines and support skin firmness
- Can help even out skin tone and reduce hyperpigmentation
- More stable formulation option compared to L-ascorbic acid
Potential concerns
- Less potent than pure L-ascorbic acid at the same concentration
- Penetration into deeper skin layers is limited without specialized delivery systems
- May cause mild irritation in sensitive skin at higher concentrations
Science: Recent research (2024) shows that ascorbyl palmitate has good antioxidant and anti-aging properties similar to L-ascorbic acid. When encapsulated in liposomes, skin penetration improved significantly (1.2–1.3 fold increase), suggesting that standard formulations may have limited effectiveness unless specifically optimized for absorption.
Analyze Ingredient Further→ -
Sodium stearoyl glutamate is a gentle cleanser and skin-conditioning agent derived from amino acids and fatty acids. It helps remove oil and impurities while maintaining skin's natural moisture balance, commonly used in cleansers and makeup removers.
Benefits
- Mild cleansing action
- Skin conditioning
- Helps remove makeup and oil
Potential concerns
- Potential allergen for sensitive individuals
- May cause contact dermatitis in susceptible people
Science: Recent dermatological literature (2022) identifies sodium stearoyl glutamate as a known sensitizer in cosmetics, capable of triggering allergic contact dermatitis in some users. While generally recognized as safe for most people, it has been documented as a cause of contact allergies in clinical cases.
Analyze Ingredient Further→ -
Hydroxyacetophenone is a naturally derived compound with antioxidant and antimicrobial properties. It's used in skincare products to help protect skin from environmental stress and maintain product freshness.
Benefits
- Antioxidant protection against free radicals
- Antimicrobial and antiseptic properties
- May help preserve product stability
Science: Research shows hydroxyacetophenone has demonstrated antioxidant, antibacterial, and antiseptic activities in cosmetic and pharmaceutical applications. However, peer-reviewed data specifically evaluating its safety profile and efficacy in topical skincare products for consumers is limited.
Analyze Ingredient Further→ -
Cellulose is a natural plant-derived polymer that acts as a thickener and structural support in skincare formulas. In skincare products like masks and serums, it forms a porous matrix that helps hold water and active ingredients on the skin, improving hydration and product delivery.
Benefits
- Increases skin hydration and moisture retention
- Improves product adhesion and allows for better delivery of active ingredients
- Biocompatible and well-tolerated by skin
- Supports the formation of masks and gel-like textures
Science: Research shows bacterial cellulose membranes significantly improve skin moisture, with one study demonstrating a 76% increase in hydration in most volunteers. Cellulose's highly porous nanostructure allows rapid incorporation and release of cosmetic actives, making it an effective support material for skincare applications.
Analyze Ingredient Further→ -
Dicaprylyl Carbonate is a lightweight, silky emollient and texture enhancer derived from coconut oil. It helps products feel smooth and non-greasy on skin while improving how easily the formula spreads and absorbs.
Benefits
- Creates a smooth, silky texture in formulas
- Provides light hydration without a heavy or oily feel
- Improves product spreadability and absorption
Science: Limited peer-reviewed data available for this ingredient. It is widely recognized as safe by cosmetic regulatory bodies (including the CosIng database) and has a long history of use in skincare and cosmetic formulations without notable safety concerns.
Analyze Ingredient Further→ -
Polyacrylate Crosspolymer-6 is a synthetic polymer used as a thickener and stabilizer in skincare formulas. It helps create a smooth, gel-like texture and keeps product ingredients evenly distributed without separating.
Benefits
- Creates smooth, spreadable texture
- Stabilizes formulas and prevents separation
- Helps products feel lightweight on skin
Science: Limited peer-reviewed data available for this ingredient. As a synthetic polymer, it is generally recognized as safe for topical use and is not absorbed through the skin due to its large molecular size. It is approved for cosmetic use in major regulatory regions.
Analyze Ingredient Further→ -
Tetrasodium Glutamate Diacetate is a chelating agent that binds to metal ions (like calcium and iron) in skincare formulations, preventing them from causing unwanted chemical reactions or product degradation. It helps keep products stable and effective over time.
Benefits
- Stabilizes skincare formulations by controlling metal ion activity
- Helps prevent product discoloration and oxidation
- Allows products to maintain consistency and efficacy during storage
Science: The Cosmetic Ingredient Review Expert Panel concluded in 2025 that Tetrasodium Glutamate Diacetate is safe for use in cosmetics at typical concentrations. Research shows it functions effectively as a chelator, with strong binding capacity for metals like calcium and iron.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients