👎 0
Ingredients
-
Analysis not yet available for this ingredient.
-
Dimethicone is a silicone-based ingredient that forms a smooth, protective layer on your skin. It helps lock in moisture, creates a soft feel, and is commonly used in moisturizers and primers to improve product texture and skin hydration.
Benefits
- Improves skin hydration by creating a moisture-barrier layer
- Provides a smooth, silky feel to products and on skin
- Well-tolerated by sensitive and atopic (eczema-prone) skin
- Non-greasy alternative to heavier oils
Science: Clinical studies demonstrate dimethicone is safe and well-tolerated in children with atopic dermatitis from 12 months of age. Research shows moisturizers containing dimethicone effectively improve skin hydration in mild-to-moderate atopic dermatitis patients over 14 days.
Analyze Ingredient Further→ -
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Sodium hyaluronate is the salt form of hyaluronic acid, a naturally occurring substance found in your skin that acts like a moisture magnet. In skincare products, it absorbs water from the environment and binds it to your skin, helping to hydrate and plump the skin's surface.
Benefits
- Delivers intense hydration to the skin
- Helps reduce the appearance of fine lines by improving skin moisture
- Supports skin barrier function
- Suitable for all skin types, including sensitive and oily skin
Potential concerns
- In very dry climates with low humidity, it may draw moisture from deeper skin layers if not sealed with an occlusive product
- Rare allergic reactions are possible but extremely uncommon
Science: While the provided research focuses on intra-articular injections for joint health (showing good safety and efficacy), hyaluronic acid and its salt form are well-established in dermatology for topical hydration. The molecule's safety profile is well-documented across decades of use in medical and cosmetic applications, with severe adverse reactions being extremely rare.
Analyze Ingredient Further→ -
Caprylyl glycol is a preservative and skin-conditioning ingredient derived from coconut oil. It helps prevent bacterial and mold growth in skincare products while also providing mild hydrating and humectant benefits to the skin.
Benefits
- Helps preserve product freshness and prevent contamination
- Provides gentle humectant properties to help retain skin moisture
- Often used as a gentler alternative to traditional preservatives
Potential concerns
- Rare cases of allergic contact dermatitis have been reported in sensitive individuals
- May cause irritation in those with known sensitivity to glycols
Science: A 200-subject repeat patch test study found no delayed hypersensitivity reactions to caprylyl glycol at typical use concentrations. However, isolated case reports of allergic contact dermatitis exist, suggesting it can act as an allergen in susceptible individuals. It is widely used in infant and sensitive-skin formulations as a preservative alternative.
Analyze Ingredient Further→ -
This is a thickening and stabilizing agent that helps give skincare products their texture and consistency. It works by absorbing water and forming a gel-like network, making products feel smooth and creamy on the skin without leaving a greasy residue.
Benefits
- Creates smooth, pleasant product texture
- Helps stabilize emulsions and prevent separation
- Allows for lightweight formulations that don't feel heavy
Science: Limited peer-reviewed data available for this ingredient. It is widely used in cosmetics and generally recognized as safe by regulatory bodies including the CosIng database and is approved for use in the EU and US.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Triethanolamine (TEA) is a pH adjusting agent and surfactant used in cosmetics to balance acidity and help mix oil and water-based ingredients. It's been used in skincare and makeup formulations for decades to improve product stability and texture.
Benefits
- Neutralizes acidic ingredients to achieve optimal skin pH
- Helps create stable, uniform product textures
- Allows better mixing of different ingredient types
Potential concerns
- May cause skin irritation or sensitization in sensitive individuals
- Can form potentially harmful nitrosamines when combined with certain preservatives
- Classified as a potential carcinogen in some recent literature reviews, though regulatory bodies consider it safe at approved concentrations
Science: A 2013 expert panel safety assessment by the Cosmetic Ingredient Review concluded TEA is safe as used in cosmetics. However, a 2023 analysis of commercial products identified TEA and its derivatives as potential carcinogens present in most facial makeup cosmetics tested, highlighting the need for longer-term safety studies on cumulative exposure.
Analyze Ingredient Further→ -
Trisodium Ethylenediamine Disuccinate is a chelating agent, which means it binds to trace metals in cosmetic formulas to keep products stable and prevent discoloration or degradation. It's used in small amounts primarily to maintain product quality rather than directly benefit your skin.
Benefits
- Extends product shelf life
- Prevents oxidation and discoloration
- Improves formula stability
Science: Limited peer-reviewed data available for this ingredient. It is approved for cosmetic use under EU and US regulations as a chelating agent and is considered safe at the low concentrations used in skincare formulations.
Analyze Ingredient Further→ -
Panthenol is a lightweight humectant derived from pantothenic acid (vitamin B5) that draws moisture into the skin and helps maintain hydration. It also supports the skin barrier and can help soothe irritation, making it a popular choice in products designed for sensitive or compromised skin.
Benefits
- Hydrates and moisturizes the skin
- Helps calm and soothe irritated or sensitive skin
- Supports skin barrier function and repair
- Lightweight and non-greasy
Science: Panthenol is one of the few ingredients in sensitive skin formulations with clinical evidence specifically tested on volunteers with sensitive skin. Research confirms it reduces skin inflammation and supports barrier function, though comprehensive clinical studies on this ingredient remain limited compared to some alternatives.
Analyze Ingredient Further→ -
Tocopherol is a form of vitamin E, a fat-soluble antioxidant that protects skin from damage caused by free radicals and oxidative stress. It helps maintain skin's natural barrier function and is commonly used in skincare products to prevent premature aging and support overall skin health.
Benefits
- Protects skin from free radical damage and oxidative stress
- Supports skin barrier function and moisture retention
- May help reduce signs of aging caused by UV exposure and environmental damage
- Works as a lipid antioxidant to prevent degradation of skin oils
Science: Tocopherol (α-tocopherol) is recognized in peer-reviewed research as a key endogenous defense mechanism against oxidative stress in aging skin, particularly from UV-induced damage. Studies confirm it functions as a lipid-soluble antioxidant capable of preventing lipid peroxidation, with established efficacy in cosmetic and therapeutic applications.
Analyze Ingredient Further→ -
Chlorphenesin is a synthetic preservative used in skincare products to prevent bacterial and fungal growth, extending shelf life. It's a broad-spectrum antimicrobial agent that helps keep products safe from contamination during storage and use.
Benefits
- Prevents microbial contamination in skincare formulations
- Extends product shelf life
- Allows formulas to remain stable without refrigeration
Potential concerns
- May cause irritation to sensitive eyes and eye area when present in eye products
- Degrades under UV exposure, potentially creating more harmful breakdown products
- Limited long-term safety data in peer-reviewed literature
Science: Research shows chlorphenesin can be toxic to eye tissue cells at approved concentrations, particularly affecting meibomian glands. When exposed to sunlight, it breaks down into compounds like 4-chlorophenol that may be more ecotoxic than the original ingredient, though systemic absorption in skincare is typically minimal.
Analyze Ingredient Further→ -
Caprylyl Methicone is a silicone-based conditioning agent that creates a smooth, lightweight film on the skin. It's used in skincare products to improve texture, reduce tackiness, and help other ingredients spread evenly across the skin.
Benefits
- Smooths skin texture
- Reduces greasy or sticky feel
- Improves product spreadability and absorption
Science: Limited peer-reviewed data available for this ingredient. It is a volatile silicone commonly used in cosmetics with a strong safety history and low skin penetration due to its molecular structure.
Analyze Ingredient Further→ -
Silica is a mineral powder derived from silicon dioxide that's commonly used in skincare and makeup products. It works primarily as a texture enhancer and absorbent, helping to mattify skin, improve product feel, and absorb excess oil.
Benefits
- Mattifies skin and reduces shine
- Improves product texture and spreadability
- Absorbs excess sebum and moisture
- Creates a smooth, refined appearance
Potential concerns
- When used as nanoparticles, potential for skin penetration remains under study
- Inhalation of silica powder (primarily occupational concern) has known health risks; topical use in cosmetics is considered lower risk
- Listed among potential carcinogenic substances in cosmetic formulations, though safe use levels and regulatory limits are established in the EU and US
Science: A 2023 review of European facial cosmetics identified silica among potential carcinogenic ingredients present in commercial products, though this reflects presence rather than proven harm at typical use concentrations. Research on silica nanoparticles suggests they are being developed for cosmetic use, but percutaneous penetration and long-term safety data remain limited. Regulatory agencies (EU, FDA) have established safe concentration limits for cosmetic use.
Analyze Ingredient Further→ -
Caprylic/Capric Triglyceride is a lightweight oil derived from coconut that acts as an emollient and helps formulations blend smoothly. It softens skin and reduces water loss by creating an occlusive barrier on the skin's surface.
Benefits
- Improves skin hydration and reduces transepidermal water loss (TEWL)
- Lightweight, non-greasy feel compared to heavier oils
- Helps deliver other active ingredients deeper into the skin
- Smooth, silky texture in skincare formulations
Science: Research shows that emulsions containing 15% caprylic/capric triglyceride significantly increase skin hydration and reduce water loss in healthy subjects. The ingredient is also used as an effective carrier oil in nanoemulsions to enhance penetration of active compounds into skin.
Analyze Ingredient Further→ -
Niacinamide is an active form of vitamin B3 that works within your skin's cells to strengthen the barrier, reduce inflammation, and regulate oil production. It's a water-soluble ingredient that's been shown to have multiple benefits across different skin concerns, from sensitivity to aging.
Benefits
- Reduces redness and calms irritation
- Minimizes pore appearance and controls excess oil
- Supports skin barrier function and hydration
- Brightens skin tone and evens complexion
- Has anti-aging properties and protects against environmental damage
Science: Niacinamide is well-tolerated and safe across diverse skin types with strong clinical evidence supporting its use for acne, dermatitis, and general skin health. Research shows it works by regulating inflammation at the cellular level and protecting skin barrier integrity, with proven efficacy in concentrations commonly found in cosmetic products.
Analyze Ingredient Further→ -
Potassium cetyl phosphate is an emulsifier and skin-conditioning agent that helps mix oil and water together in creams and lotions. It also helps create a protective barrier on the skin to lock in moisture.
Benefits
- Helps create stable, smooth-textured creams
- Improves skin hydration by forming a protective moisture barrier
- Enhances skin softness and spreadability of products
Science: Research shows potassium cetyl phosphate works effectively as part of lipid complexes to improve skin hydration and barrier function, particularly when combined with other fatty acids and ceramide-like ingredients. It creates organized lipid structures on the skin that help reduce water loss and support skin density improvements.
Analyze Ingredient Further→ -
Xanthan gum is a natural thickener derived from fermented bacteria that helps give skincare products a smooth, gel-like texture. It stabilizes formulas and prevents ingredients from separating, while also helping products spread evenly on skin.
Benefits
- Creates smooth, pleasant texture
- Stabilizes emulsions and prevents separation
- Improves product spreadability and application
Science: Xanthan gum is an FDA-approved, anionic polysaccharide with a long history of safe use across food, pharmaceutical, and cosmetic industries since 1969. Its performance as a thickener and stabilizer is well-established in scientific literature, with no notable skin irritation concerns reported.
Analyze Ingredient Further→ -
Diethylhexyl Syringylidenemalonate is a synthetic antioxidant derived from plant-based compounds. It works by neutralizing free radicals and oxidative stress on the skin, helping to protect against environmental damage and support skin stability in formulations.
Benefits
- Antioxidant protection against free radicals
- Helps prevent product oxidation and degradation
- May support skin defense against environmental stressors
Science: Limited peer-reviewed data available for this ingredient. It is structurally related to known antioxidant compounds and is used in cosmetics at low concentrations, with no significant safety concerns reported in cosmetic safety databases.
Analyze Ingredient Further→ -
Glyceryl stearate is a natural emulsifier and thickener derived from vegetable oils and glycerin. It helps bind water and oil together in skincare formulas, creating a smooth texture while providing mild moisturizing properties.
Benefits
- Helps create stable, smooth product textures
- Mild emollient that softens skin
- Derived from natural sources (vegetable-based)
Science: The Cosmetic Ingredient Review Expert Panel confirmed in 2023 that glyceryl stearate and related glyceryl diesters are safe for cosmetic use at standard concentrations. Research indicates the ingredient has a skin-safe pH profile and demonstrates good stability in formulations.
Analyze Ingredient Further→ -
PEG-100 Stearate is an emulsifier—a ingredient that helps bind water and oil together in creams and lotions, creating a smooth, stable texture. It's derived from stearic acid (a fatty acid) combined with polyethylene glycol, and helps products feel pleasant on skin while maintaining their consistency.
Benefits
- Helps stabilize cream formulations so they don't separate
- Creates a smooth, non-greasy texture
- May support skin barrier function when used in well-formulated products
Science: Research shows PEG-100 Stearate formulations can help improve skin barrier function and reduce water loss from skin, even on compromised or irritated skin. The ingredient was well-tolerated in studies comparing it to marketed skincare products.
Analyze Ingredient Further→ -
Polymethylsilsesquioxane is a silica-based powder derived from silicon that acts as a lightweight filler and texture enhancer in skincare products. It helps absorb oils, create a smooth matte finish, and improve how products feel and spread on the skin.
Benefits
- Creates a smooth, velvety texture on skin
- Helps absorb excess oil and sebum
- Provides a matte finish without a heavy feel
- Improves product spreadability and blendability
Science: Recent research confirms polymethylsilsesquioxane is a hydrophobic silica polymer with high biocompatibility, synthesized using non-toxic methods. Its safety profile aligns with established silica filler use in cosmetics, though direct dermatological safety studies in skincare formulations are limited.
Analyze Ingredient Further→ -
Poly C10-30 Alkyl Acrylate is a synthetic polymer used primarily as a film-forming agent and texture enhancer in skincare products. It creates a lightweight, flexible coating on the skin that helps products feel smooth and can improve their staying power.
Benefits
- Creates a smooth, even texture on skin
- Helps products adhere better and last longer
- Provides a light, non-greasy feel
Potential concerns
- Potential for buildup with repeated layering of multiple products
- May trap moisture and heat if applied too thickly on sensitive skin
- Rarely, can cause mild irritation in individuals with polymer sensitivities
Science: Limited peer-reviewed data available for this ingredient. It is generally recognized as safe in cosmetic formulations and is approved by major regulatory bodies (EU, FDA) for use in skincare at typical concentrations.
Analyze Ingredient Further→ -
P-Anisic acid is a naturally-derived compound that acts as a preservative and antimicrobial agent in skincare products. It helps prevent bacterial and microbial growth, making it an alternative to some traditional chemical preservatives, particularly in products designed for sensitive or infant skin.
Benefits
- Antimicrobial properties help preserve product shelf life
- May promote gentle skin cell growth at appropriate concentrations
- Well-tolerated by skin cells with minimal irritation risk
- Considered a gentler preservative option for sensitive formulations
Potential concerns
- At very high concentrations (100+ µg/mL), may slightly reduce skin cell proliferation
- Limited safety data in real-world skincare applications outside controlled laboratory studies
Science: Recent research demonstrates that p-anisic acid shows good biocompatibility with skin cells and can be effectively delivered through polymer systems without causing cytotoxicity at typical use levels. It is being investigated as a preservative replacement in cosmetics for sensitive populations and infant products.
Analyze Ingredient Further→ -
Styrene/Acrylates Copolymer is a synthetic polymer used as a film-forming and binding agent in skincare products. It creates a lightweight, flexible layer on the skin's surface that helps products adhere better and can provide a subtle smoothing or mattifying effect.
Benefits
- Improves product texture and wear
- Provides light film-forming properties for a smooth finish
- Helps bind other ingredients together
Potential concerns
- Potential for buildup with repeated layering
- May feel occlusive on sensitive or acne-prone skin if overused
Science: Limited peer-reviewed data available for this ingredient. Styrene/Acrylates Copolymers are widely used in cosmetics and generally recognized as safe by regulatory bodies, though individual sensitivities can vary.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
This is a film-forming polymer that combines silicone and acrylic components. It creates a smooth, flexible coating on the skin's surface to improve texture, provide a soft-focus effect, and help other ingredients stay on the skin longer.
Benefits
- Smooths skin texture and minimizes the appearance of pores and fine lines
- Creates a silky, comfortable feel on the skin
- Helps create a matte or satin finish in products
Science: Limited peer-reviewed data available for this ingredient. It is widely used in cosmetics as a film-forming agent and is generally recognized as safe by regulatory bodies including the FDA and EU cosmetics regulations.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients