Ingredients
-
Analysis not yet available for this ingredient.
-
Dimethicone is a silicone-based ingredient that forms a smooth, protective layer on your skin. It helps lock in moisture, creates a soft feel, and is commonly used in moisturizers and primers to improve product texture and skin hydration.
Benefits
- Improves skin hydration by creating a moisture-barrier layer
- Provides a smooth, silky feel to products and on skin
- Well-tolerated by sensitive and atopic (eczema-prone) skin
- Non-greasy alternative to heavier oils
Science: Clinical studies demonstrate dimethicone is safe and well-tolerated in children with atopic dermatitis from 12 months of age. Research shows moisturizers containing dimethicone effectively improve skin hydration in mild-to-moderate atopic dermatitis patients over 14 days.
Analyze Ingredient Further→ -
Butylene glycol is a humectant—a type of ingredient that draws water into the skin and helps it stay hydrated. It's a small, lightweight molecule commonly used in moisturizers to improve hydration without leaving a heavy feel on the skin.
Benefits
- Increases skin hydration and moisture retention
- Lightweight and absorbs quickly
- Helps other active ingredients penetrate the skin more effectively
Science: Research demonstrates that butylene glycol, when combined with other humectants (like glycerin and hyaluronic acid) and occlusive ingredients in moisturizers, significantly improves skin hydration in both healthy skin and compromised skin conditions such as atopic dermatitis. It is recognized as a safe, effective humectant in dermatological formulations.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Triethanolamine (TEA) is a pH adjusting agent and surfactant used in cosmetics to balance acidity and help mix oil and water-based ingredients. It's been used in skincare and makeup formulations for decades to improve product stability and texture.
Benefits
- Neutralizes acidic ingredients to achieve optimal skin pH
- Helps create stable, uniform product textures
- Allows better mixing of different ingredient types
Potential concerns
- May cause skin irritation or sensitization in sensitive individuals
- Can form potentially harmful nitrosamines when combined with certain preservatives
- Classified as a potential carcinogen in some recent literature reviews, though regulatory bodies consider it safe at approved concentrations
Science: A 2013 expert panel safety assessment by the Cosmetic Ingredient Review concluded TEA is safe as used in cosmetics. However, a 2023 analysis of commercial products identified TEA and its derivatives as potential carcinogens present in most facial makeup cosmetics tested, highlighting the need for longer-term safety studies on cumulative exposure.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Ethylhexylglycerin is a preservative and antimicrobial ingredient used to prevent bacterial growth and extend shelf life in skincare products. It's a multifunctional ingredient that helps keep formulations stable and free from contamination.
Benefits
- Prevents bacterial contamination in products
- Helps extend product shelf life
- Works synergistically with other preservatives for enhanced protection
Potential concerns
- May not be effective against all bacterial species (notably some Pseudomonas aeruginosa strains)
- Preservative-related sensitization possible in sensitive individuals, though uncommon
Science: Research shows ethylhexylglycerin has broad antimicrobial activity against many common cosmetic contaminants, though effectiveness varies by bacterial species. Studies demonstrate it can work synergistically with other preservative components to enhance biofilm inhibition.
Analyze Ingredient Further→ -
C12-15 Alkyl Benzoate is a lightweight emollient (skin softener) derived from benzoic acid and plant-based alcohols. It's commonly used in sunscreens and moisturizers to create a smooth texture, help dissolve UV filters, and improve how the product feels on skin.
Benefits
- Provides a silky, non-greasy feel
- Helps dissolve and stabilize UV filters in sunscreens
- Lightweight emollient that conditions skin without heaviness
Science: Research shows C12-15 Alkyl Benzoate is effective as a sunscreen emollient, though studies indicate that more polar (water-loving) emollients like Dibutyl Adipate may provide slightly better UVA protection. The ingredient has a good safety profile in cosmetic formulations.
Analyze Ingredient Further→ -
Behenyl alcohol is a waxy, plant-derived fatty alcohol that acts as a thickener and emollient in skincare products. It helps create stable, creamy textures in formulations and can improve the feel and moisturizing properties of creams and lotions.
Benefits
- Thickens and stabilizes product texture
- Provides emollient properties for skin conditioning
- Helps reduce moisture loss from skin
- Creates a smooth, non-greasy feel in formulations
Science: Research from L'Oréal shows behenyl alcohol works effectively as a structure-building agent in oil-based skincare systems, particularly when combined with behenic acid. It forms stable crystalline networks in oils that enhance product stability and texture without irritation concerns.
Analyze Ingredient Further→ -
Adenosine is a naturally occurring compound found in all living cells that plays a role in skin cell energy production and communication. In skincare, it's used to help support skin barrier function and may promote a smoother, more resilient complexion.
Benefits
- Supports skin barrier strength and integrity
- May help reduce the appearance of fine lines and wrinkles
- Promotes skin cell energy metabolism and repair
Science: Research indicates adenosine and related compounds (like cyclic adenosine monophosphate) regulate skin barrier formation and epidermal differentiation. While direct clinical studies on topical adenosine in skincare are limited, the ingredient's role in cellular energy and barrier maintenance is well-established in dermatological literature.
Analyze Ingredient Further→ -
Cyclopentasiloxane is a lightweight silicone fluid commonly used in skincare products as an emollient and slip agent. It helps products glide smoothly onto skin and creates a soft, silky feel without leaving a greasy residue.
Benefits
- Smooth application and comfortable feel
- Lightweight moisturizing layer
- Helps other ingredients spread evenly across skin
Potential concerns
- May not be suitable for acne-prone skin as it can be occlusive
- Some people prefer to avoid silicones due to environmental concerns
- Can accumulate on skin if not properly cleansed
Science: Limited peer-reviewed data available for this ingredient in skincare efficacy studies. Cyclopentasiloxane is widely used in cosmetics and considered safe by regulatory bodies, though some environmental persistence concerns have been noted in chemical literature.
Analyze Ingredient Further→ -
Pullulan is a natural polysaccharide (a type of carbohydrate) derived from yeast that acts as a film-forming agent and thickener in skincare products. It creates a lightweight, breathable layer on the skin that can help improve texture and provide a smooth finish, similar to how primer works in makeup.
Benefits
- Creates a smooth, even skin surface and improves product texture
- Forms a lightweight, breathable film that doesn't feel heavy
- Helps other ingredients adhere better to the skin
- Generally well-tolerated by most skin types including sensitive skin
Science: Pullulan is recognized in pharmaceutical and cosmeceutical formulations as a safe, multifunctional ingredient. Limited direct clinical studies exist on pullulan's specific skincare benefits, but it is widely used and accepted as a generally safe ingredient with minimal irritation potential.
Analyze Ingredient Further→ -
This is a silicone-based emulsifier and texture enhancer made by combining silicone with water-soluble polymers. It helps blend oils and water together in formulas while creating a smooth, lightweight feel on the skin.
Benefits
- Improves product texture and spreadability
- Creates a smooth, non-greasy finish
- Helps stabilize formulas containing both oil and water
Science: Limited peer-reviewed data available for this specific ingredient. As a silicone-polymer hybrid, it's generally recognized as safe in cosmetics and is well-tolerated by most skin types, though some individuals may prefer to avoid silicones.
Analyze Ingredient Further→ -
Sodium polyacrylate is a synthetic polymer that absorbs and holds water, creating a gel-like texture. In skincare, it's used as a thickener and moisture-retention agent to improve product consistency and help keep skin hydrated.
Benefits
- Absorbs and retains moisture to support skin hydration
- Thickens product texture for better application and feel
- Creates a smooth, spreadable consistency in formulations
Science: Contact dermatitis research involving multiple UK hospital dermatology centres found that sensitisation to sodium polyacrylate is rare, indicating excellent safety for topical skincare use. The ingredient has also been studied for advanced biomedical applications including wearable sensors, demonstrating its biocompatibility.
Analyze Ingredient Further→ -
Cetearyl Ethylhexanoate is a lightweight synthetic oil used as an emollient and texture enhancer in skincare products. It helps soften skin, improves product spreadability, and creates a smooth, non-greasy feel on the skin.
Benefits
- Softens and smooths skin
- Improves product texture and absorption
- Reduces greasy residue
Science: Limited peer-reviewed data available for this ingredient. It is structurally similar to other ester-based emollients widely used in cosmetics and considered safe by major regulatory bodies including the FDA and EU.
Analyze Ingredient Further→ -
Algae extract is a natural ingredient derived from seaweed that contains beneficial compounds like astaxanthin and other antioxidants. It's used in skincare to help protect skin from environmental damage and support the skin's natural repair processes.
Benefits
- Antioxidant protection against free radicals and UV-related aging
- May support wound healing and skin repair
- Antimicrobial properties that may help protect against bacteria
Science: Research shows algae extract formulations deliver strong antioxidant activity and were found effective in wound healing studies, with the extract showing antimicrobial properties against common bacteria. However, most studies focus on specific algae species (like Gracilaria and Scenedesmus) rather than algae extract as a broad category, so results may vary by source.
Analyze Ingredient Further→ -
Xylitol is a naturally occurring sugar alcohol that functions as a humectant in skincare, helping to draw moisture into the skin and maintain hydration. It has been safely used in cosmetics, food, and pharmaceuticals for over 50 years.
Benefits
- Hydrates and moisturizes skin by drawing water into the outer layers
- Gentle humectant suitable for sensitive skin types
- Does not trigger rapid blood sugar spikes like regular sugar
Science: Xylitol is endogenously produced in the body and has an established safety history spanning decades of use across multiple industries. Recent cardiovascular research found no significant risk links in clinical studies, though some pilot trials suggest temporary platelet effects at very high doses—irrelevant to topical skincare application.
Analyze Ingredient Further→ -
Dipalmitoyl Hydroxyproline is a modified amino acid derivative designed to improve skin firmness and texture. It works by supporting the skin's structural proteins and is typically used in anti-aging and firming formulations.
Benefits
- May support skin firmness and elasticity
- Helps improve skin texture appearance
- Generally lightweight and non-greasy
Science: Limited peer-reviewed data available for this ingredient. It is derived from hydroxyproline, a natural component of collagen, but direct evidence of efficacy in topical skincare products is minimal.
Analyze Ingredient Further→ -
Anhydroxylitol is a sugar alcohol derived from natural sources, used in skincare formulas primarily as a humectant to help retain moisture in the skin. It works by drawing water into the outer layer of skin, making it smoother and more hydrated.
Benefits
- Improves skin hydration and moisture retention
- Reduces visible skin roughness and fine texture
- Smooths skin microrelief (the tiny peaks and valleys on skin surface)
Science: A 2023 clinical study found that a moisturiser blend containing anhydroxylitol (combined with xylitylglucoside and xylitol) significantly reduced skin roughness measures within 8 hours of application, outperforming some individual moisturisers like urea. The ingredient received a safety clearance from the Cosmetic Ingredient Review Expert Panel in 2025, confirming its safety for use in cosmetics.
Analyze Ingredient Further→ -
Xylitylglucoside is a natural humectant derived from xylose and glucose that works by drawing moisture into the skin and helping it stay hydrated. It's a gentle, sugar-based ingredient commonly used in moisturisers to improve skin smoothness and texture.
Benefits
- Improves skin hydration and moisture retention
- Reduces skin roughness and smooths microrelief texture
- Gentle humectant suitable for sensitive skin types
Science: A 2023 clinical study found that xylitylglucoside (combined with anhydroxylitol and xylitol) showed strong moisturising effects, reducing skin roughness by 2.8-fold and plateau height by 2.1-fold within 8 hours of application—performance comparable to or better than urea and saccharide isomerate.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Trideceth-6 is a mild surfactant and emulsifier derived from plant-based sources. It helps blend oil and water-based ingredients together and can improve the texture and spreadability of skincare formulations.
Benefits
- Helps stabilize formulations by mixing oil and water components
- Improves product texture and ease of application
- Supports uniform distribution of active ingredients
Science: Trideceth-6 has been used safely in cosmetic formulations including self-tanning products. Research shows it functions effectively as part of rheology modifier blends, contributing to improved product performance and skin coverage without adverse effects noted in clinical studies.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients