Ingredients
-
Butylene glycol is a humectant—a type of ingredient that draws water into the skin and helps it stay hydrated. It's a small, lightweight molecule commonly used in moisturizers to improve hydration without leaving a heavy feel on the skin.
Benefits
- Increases skin hydration and moisture retention
- Lightweight and absorbs quickly
- Helps other active ingredients penetrate the skin more effectively
Science: Research demonstrates that butylene glycol, when combined with other humectants (like glycerin and hyaluronic acid) and occlusive ingredients in moisturizers, significantly improves skin hydration in both healthy skin and compromised skin conditions such as atopic dermatitis. It is recognized as a safe, effective humectant in dermatological formulations.
Analyze Ingredient Further→ -
Glycerin is a naturally derived humectant—a ingredient that draws moisture from the air into your skin. It's one of the most widely used and well-studied moisturizing agents in skincare, helping skin feel softer and more hydrated.
Benefits
- Attracts and retains moisture in the skin
- Improves skin hydration and softness
- Helps strengthen skin barrier function
- Suitable for most skin types, including sensitive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded glycerin is safe as used in cosmetics across all concentrations. Research shows glycerin effectively improves skin hydration and is well-tolerated with minimal irritation risk. It is also referenced in clinical guidelines for managing inflammatory skin conditions and maintaining skin integrity.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Lecithin is a naturally derived ingredient that acts as an emulsifier and skin conditioner in skincare products. It helps blend water and oil-based ingredients together and can improve the texture and feel of creams and lotions on your skin.
Benefits
- Helps create smooth, blended formulations
- Conditions and softens skin
- Improves product texture and spreadability
Science: The Cosmetic Ingredient Review Expert Panel concluded that lecithin and related phosphoglycerides are safe for use in cosmetics at concentrations up to 50%, based on comprehensive safety assessment. While lecithin can have physiological effects when ingested, these effects are not reproduced through topical skin application.
Analyze Ingredient Further→ -
Polysorbate 60 is an emulsifier and solubilizer derived from sorbitan and polyethylene glycol. It helps blend water and oil-based ingredients together in formulations and can assist in delivering active ingredients into the skin.
Benefits
- Helps stabilize product texture by mixing incompatible ingredients
- May improve skin penetration of certain active ingredients
- Enables creation of lightweight, uniform formulations
Science: Research shows polysorbate 60 functions effectively as a surfactant in nanoparticle delivery systems, enhancing skin penetration of topical actives. It has been used safely in pharmaceutical formulations with established stability profiles and minimal irritation potential at typical cosmetic concentrations.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
This is a synthetic polymer that acts as a thickener and film-former in skincare products. It helps create a smooth texture, improve product consistency, and can form a light protective layer on the skin's surface to help retain moisture.
Benefits
- Improves product texture and spreadability
- Helps retain moisture on skin
- Creates a smooth, even application
Science: Limited peer-reviewed data available for this ingredient. It is used widely in cosmetics as a safe thickening and film-forming agent, with no significant safety concerns reported in cosmetic safety databases.
Analyze Ingredient Further→ -
Gluconolactone is a gentle exfoliating acid that belongs to the polyhydroxy acid (PHA) family. It works by removing dead skin cells from the surface and is known for being less irritating than stronger acids, making it suitable for sensitive skin types.
Benefits
- Gentle exfoliation that removes dead skin cells
- Increases skin hydration and strengthens the skin barrier
- Reduces sebum production and helps balance oily skin
- May help reduce inflammation and support skin with sensitivity or irritation
Potential concerns
- May cause mild irritation, redness, or dryness when first introduced, especially in sensitive skin
- Can increase sun sensitivity — sunscreen is recommended during use
Science: Recent research shows gluconolactone effectively improves skin hydration, reduces sebum, and strengthens the skin barrier when used in chemical peels. Emerging evidence suggests it may have immune-regulating properties that could help calm inflammatory skin conditions, though this research is still in early stages.
Analyze Ingredient Further→ -
Salicylic acid is a beta hydroxy acid (BHA) that works by gently exfoliating the skin's surface and penetrating pores to remove dead skin cells and excess oil. It's commonly used in acne treatments and can help improve skin texture and clarity.
Benefits
- Helps reduce acne breakouts by unclogging pores
- Gently exfoliates to improve skin texture
- May help fade dark spots and improve uneven skin tone when used as part of combination treatments
Potential concerns
- Can cause dryness, irritation, or sensitivity, especially with frequent use or in higher concentrations
- May increase sun sensitivity, so daily sunscreen is recommended
- Not recommended during pregnancy without consulting a healthcare provider
Science: Salicylic acid is recognized as a first-line topical acne treatment and is considered safe for most users. Research also supports its use as an adjuvant therapy for melasma and hyperpigmentation when combined with other treatments. Start with lower concentrations and introduce gradually to minimize irritation.
Analyze Ingredient Further→ -
Potassium hydroxide is a strong alkaline chemical used in skincare products primarily as a pH buffer and emulsifier to neutralize acids and help blend oil and water-based ingredients. In cosmetics, it's used in very small amounts to adjust and maintain product pH.
Benefits
- pH adjustment and stabilization
- Helps create stable emulsions in creams and lotions
- Enables mixing of incompatible ingredients
Potential concerns
- Can cause skin irritation or chemical burns if used at high concentrations
- May disrupt skin's natural pH if product formulation is inadequate
- Requires careful formulation to ensure safe levels for consumer use
Science: The provided research discusses potassium hydroxide only as a laboratory diagnostic tool (KOH wet-mount preparation for fungal testing), not as an active skincare ingredient. Limited peer-reviewed data exists specifically on potassium hydroxide safety in cosmetic formulations at consumer-use concentrations. Safety depends entirely on proper dilution and formulation by manufacturers.
Analyze Ingredient Further→ -
Melia Azadirachta Leaf Extract comes from neem leaves, a plant used in traditional medicine for centuries. In skincare, it's valued for its antimicrobial and anti-inflammatory properties, making it popular in products aimed at acne-prone or irritated skin.
Benefits
- May help reduce bacteria that contribute to acne
- Anti-inflammatory properties may soothe irritated skin
- Traditionally used to support skin clarity
Potential concerns
- Can cause contact dermatitis or allergic reactions in sensitive individuals
- Neem has a strong odor that some find unpleasant
- May increase sun sensitivity in some users
Science: Limited peer-reviewed data available for this ingredient in cosmetic formulations. Traditional use and in vitro studies suggest antimicrobial activity, but robust clinical evidence in skincare products remains limited.
Analyze Ingredient Further→ -
Isohexadecane is a lightweight synthetic oil used in skincare formulations to improve texture, spreadability, and how products feel on skin. It helps emulsions stay stable and gives products a smooth, non-greasy finish.
Benefits
- Creates a smooth, lightweight texture that spreads easily on skin
- Helps skincare products absorb without a heavy or greasy feel
- Improves product stability in emulsions
Science: Research shows isohexadecane is used in oil-in-water emulsions to enhance spreadability and skin feel. Studies confirm it functions effectively as an emollient ingredient, though it has slightly higher instability in nano-emulsion systems compared to linear-chain oils with similar carbon numbers.
Analyze Ingredient Further→ -
C13-15 Alkane is a lightweight, colorless oil derived from petroleum that acts as an emollient and texture enhancer in skincare products. It helps soften and smooth the skin while giving products a silky, non-greasy feel.
Benefits
- Lightweight moisturizing without heavy residue
- Improves product spreadability and smooth application
- Creates a silky skin feel
Science: Limited peer-reviewed data available for this ingredient. It is generally recognized as safe by regulatory bodies (including the FDA) for use in cosmetics and is non-irritating for most skin types.
Analyze Ingredient Further→ -
Dicaprylyl Carbonate is a lightweight, silky emollient and texture enhancer derived from coconut oil. It helps products feel smooth and non-greasy on skin while improving how easily the formula spreads and absorbs.
Benefits
- Creates a smooth, silky texture in formulas
- Provides light hydration without a heavy or oily feel
- Improves product spreadability and absorption
Science: Limited peer-reviewed data available for this ingredient. It is widely recognized as safe by cosmetic regulatory bodies (including the CosIng database) and has a long history of use in skincare and cosmetic formulations without notable safety concerns.
Analyze Ingredient Further→ -
Cetearyl Olivate is a natural emulsifier and skin-conditioning agent derived from olive oil. It helps blend oil and water-based ingredients together in skincare products while leaving skin feeling soft and moisturized.
Benefits
- Helps create smooth, stable product texture
- Provides light moisturizing properties
- Derived from natural olive oil
Science: Limited peer-reviewed data available for this ingredient. Cetearyl Olivate is widely used in cosmetics as a safe, naturally-derived emulsifier with a strong safety history in consumer skincare products.
Analyze Ingredient Further→ -
Sorbitan Olivate is an emulsifier derived from sorbitol (a natural sugar alcohol) and olive oil fatty acids. It helps mix oil and water-based ingredients together in skincare formulations, creating stable, smooth products.
Benefits
- Stabilizes product texture and prevents separation of oils and water
- Derived from natural olive oil, aligning with plant-based ingredient preferences
- Allows for creation of lighter, more elegant formulations
Potential concerns
- Generally mild skin irritant in some individuals; minimal irritation in most clinical studies
- Rare allergic contact dermatitis reported in fewer than 1% of sensitive individuals
- May cause greater irritation when combined with fragrance components
Science: The Cosmetic Ingredient Review Expert Panel concluded Sorbitan Olivate is safe for cosmetic use at concentrations typically below 10%. Clinical studies show it is generally a minimal to mild skin irritant and nonsensitizing in the general population, though rare allergic reactions have been documented in individuals with contact dermatitis.
Analyze Ingredient Further→ -
A synthetic polymer that acts as a film-former and thickening agent in skincare products. It creates a light, flexible layer on the skin's surface to help products spread smoothly and improve texture without feeling heavy.
Benefits
- Creates a smooth, even texture in formulations
- Helps products adhere better to skin
- Contributes to lightweight, non-greasy feel
Science: The Cosmetic Ingredient Review Expert Panel assessed vinylpyrrolidone polymers (the VP component of this ingredient) and determined that 27 of 30 polymers in this class are safe for cosmetic use at typical concentrations. This specific copolymer was included in the safe-to-use category.
Analyze Ingredient Further→ -
Mandelic acid is a natural chemical exfoliant derived from bitter almonds that gently removes dead skin cells from the surface. It works by dissolving the 'glue' that holds skin cells together, helping to improve skin texture and clarity.
Benefits
- Exfoliates dead skin cells to improve skin texture and brightness
- Helps reduce mild acne and breakouts
- Generally gentler than stronger chemical exfoliants like glycolic acid
- May help with hyperpigmentation and uneven skin tone
Potential concerns
- Can cause irritation, redness, or sensitivity in some people, especially with frequent use
- May increase sun sensitivity—sunscreen is essential when using this ingredient
- Not suitable for very sensitive or compromised skin barriers
- Should be introduced gradually into skincare routines
Science: A 2022 systematic review of acne treatments found mandelic acid chemical peels effective for mild-to-moderate acne, achieving approximately 40% reduction in lesion count. However, limited peer-reviewed data exists on optimal concentrations, frequency of use, and long-term safety in everyday skincare products.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients