Ingredients
-
Analysis not yet available for this ingredient.
-
Hexylene glycol is a lightweight humectant and preservative booster used in skincare products to help retain moisture and improve product stability. It also enhances the penetration of other active ingredients into the skin.
Benefits
- Helps skin retain moisture
- Improves product texture and spreadability
- Enhances effectiveness of preservative systems
Potential concerns
- May cause mild irritation or redness in sensitive individuals (occurs in roughly 3% of eczema-prone skin)
- Potential for delayed allergic contact reactions in susceptible people, though this is uncommon
- Less irritating than propylene glycol under occlusion, but still worth avoiding if you have known sensitivities to glycols
Science: A 1989 study found hexylene glycol caused visible skin reactions in 2.8% of eczema patients at high concentrations (30-50%), with potential for delayed allergic sensitization in rare cases. It was less irritating than propylene glycol. One case report mentions hexylene glycol as a potential allergen in medical formulations, though reactions are uncommon at typical cosmetic concentrations.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Titanium dioxide is a naturally occurring mineral that works as a physical UV filter and opacifying agent in skincare products. It sits on the skin's surface and reflects and scatters UV rays to provide broad-spectrum sun protection, and is also commonly used in foundations and powders to create coverage and a matte finish.
Benefits
- Provides broad-spectrum UVA and UVB protection
- Physical (non-chemical) sun filter suitable for sensitive skin
- Helps create opaque, matte finishes in makeup and tinted products
Potential concerns
- May leave a white cast on darker skin tones due to its opacity
- Can feel slightly heavy or occlusive on very oily skin types
- Rarely, inhalation of airborne powder particles may be a concern in occupational settings, though not in typical consumer use
Science: Titanium dioxide has a long history of safe use in cosmetics and is approved by the FDA, EU, and other major regulatory bodies as a sunscreen active ingredient. It is considered non-toxic and non-penetrating when applied topically in skincare products.
Analyze Ingredient Further→ -
Salicylic acid is a beta hydroxy acid (BHA) that works by gently exfoliating the skin's surface and penetrating pores to remove dead skin cells and excess oil. It's commonly used in acne treatments and can help improve skin texture and clarity.
Benefits
- Helps reduce acne breakouts by unclogging pores
- Gently exfoliates to improve skin texture
- May help fade dark spots and improve uneven skin tone when used as part of combination treatments
Potential concerns
- Can cause dryness, irritation, or sensitivity, especially with frequent use or in higher concentrations
- May increase sun sensitivity, so daily sunscreen is recommended
- Not recommended during pregnancy without consulting a healthcare provider
Science: Salicylic acid is recognized as a first-line topical acne treatment and is considered safe for most users. Research also supports its use as an adjuvant therapy for melasma and hyperpigmentation when combined with other treatments. Start with lower concentrations and introduce gradually to minimize irritation.
Analyze Ingredient Further→ -
Magnesium aluminum silicate is a naturally occurring clay mineral that works as a thickener and absorbent in skincare products. It helps create a smooth texture, absorb excess oil, and can be used as a delivery system for other active ingredients.
Benefits
- Absorbs excess oil and sebum from skin
- Creates a smooth, even texture in formulations
- Can help support skin delivery systems for other beneficial ingredients
- Generally well-tolerated with a long history of use in cosmetics
Potential concerns
- May cause dryness if overused, particularly on already dry skin types
- Potential for skin irritation in sensitive individuals, though generally mild
Science: Scientific literature indicates magnesium aluminum silicate clays have antimicrobial properties, support wound healing, and can protect against UV damage. These minerals are increasingly used in topical skincare systems and are considered safe excipients with minimal toxicological concerns for cosmetic application.
Analyze Ingredient Further→ -
Glyceryl stearate is a natural emulsifier and thickener derived from vegetable oils and glycerin. It helps bind water and oil together in skincare formulas, creating a smooth texture while providing mild moisturizing properties.
Benefits
- Helps create stable, smooth product textures
- Mild emollient that softens skin
- Derived from natural sources (vegetable-based)
Science: The Cosmetic Ingredient Review Expert Panel confirmed in 2023 that glyceryl stearate and related glyceryl diesters are safe for cosmetic use at standard concentrations. Research indicates the ingredient has a skin-safe pH profile and demonstrates good stability in formulations.
Analyze Ingredient Further→ -
Polyethylene is a synthetic plastic polymer used in skincare products as a thickening agent, emollient, and texture modifier. It creates a smooth, spreadable consistency and helps bind ingredients together in formulations.
Benefits
- Creates smooth, pleasant texture in creams and lotions
- Helps stabilize and thicken product formulations
- Provides a protective barrier on skin surface
Potential concerns
- Poor biodegradability — persists in the environment and may accumulate over time
- Not derived from renewable sources, contributing to plastic waste
- Microplastic concern if used in products that wash down drains
Science: Research indicates polyethylene shows poor environmental biodegradability and does not meet emerging sustainability criteria for topical skincare products. While safe for skin contact, dermatological literature increasingly recommends plant-based alternatives (such as plant waxes and biopolymers) to reduce environmental impact.
Analyze Ingredient Further→ -
Disodium cocoamphodiacetate is a mild, plant-derived cleansing agent (surfactant) made from coconut oil. It removes dirt and oil from skin while being gentler than many traditional detergents, making it a common choice in facial cleansers and body washes.
Benefits
- Effectively cleanses skin without harsh stripping
- Well-tolerated by sensitive skin types
- Mild enough for daily use in facial products
- Plant-derived ingredient
Science: A 2010 clinical study of 105 patients found disodium cocoamphodiacetate to be one of the most well-tolerated surfactants tested, with no allergic reactions or irritation observed. It is recognized in dermatological literature as a mild amphoteric surfactant suitable for sensitive skin formulations.
Analyze Ingredient Further→ -
Menthol is a cooling compound derived from peppermint that creates a refreshing sensation on the skin. In skincare, it's used primarily to soothe itching and provide temporary relief from discomfort, particularly for irritated or sensitive skin.
Benefits
- Reduces itching and provides cooling relief
- Helps soothe irritated or inflamed skin
- Creates a refreshing, tingling sensation
Potential concerns
- Can cause irritation or burning in sensitive individuals
- May trigger stinging or temporary discomfort on damaged skin barrier
- Some people may experience contact sensitivity or allergic reactions
- Not suitable for very inflamed conditions requiring medical treatment
Science: Medical literature identifies menthol as an established neuropathic topical treatment for chronic itching and pruritus, particularly when inflammatory causes have been ruled out. It is recognized as effective for itch relief but is generally considered a complementary therapy rather than a primary treatment for serious skin conditions.
Analyze Ingredient Further→ -
Sodium sulfate is a mineral salt commonly used in skincare products as a thickening agent, emulsifier, and texture modifier. It helps give products a pleasant consistency and stability but does not directly treat or benefit the skin.
Potential concerns
- May cause dryness or irritation in sensitive individuals
- Can disrupt skin barrier if used in high concentrations
- May cause mild irritation in products formulated at elevated concentrations
Science: Limited peer-reviewed data available for sodium sulfate as a cosmetic skincare ingredient. The provided research focuses on dextran sodium sulfate as a disease-inducing agent in animal models, not on topical cosmetic safety or efficacy.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Methylisothiazolinone (MI) is a preservative used in skincare and personal care products to prevent bacterial and fungal growth. It helps extend shelf life and maintain product safety during storage and use.
Benefits
- Prevents microbial contamination in products
- Extends product shelf life
- Allows brands to reduce other preservative systems
Potential concerns
- Known contact allergen — can cause allergic contact dermatitis in sensitive individuals
- Rising rates of allergic reactions reported globally, particularly in North America
- May cause itching, redness, or rash on skin; reactions can be delayed and sometimes severe
- Even at standard test concentrations, up to 50% of allergic cases may go undetected initially
Science: Methylisothiazolinone is a well-documented contact allergen responsible for considerable morbidity in the population. It has been regulated in the European Union due to rising allergic reactions, resulting in a significant drop in cases there, though high rates persist in North America. Recent dermatological literature identifies it as a frequent cause of allergic contact dermatitis warranting closer monitoring and stricter regulatory oversight.
Analyze Ingredient Further→
Edit this product
Edit Ingredients