👎 0
Ingredients
-
Caprylyl glycol is a preservative and skin-conditioning ingredient derived from coconut oil. It helps prevent bacterial and mold growth in skincare products while also providing mild hydrating and humectant benefits to the skin.
Benefits
- Helps preserve product freshness and prevent contamination
- Provides gentle humectant properties to help retain skin moisture
- Often used as a gentler alternative to traditional preservatives
Potential concerns
- Rare cases of allergic contact dermatitis have been reported in sensitive individuals
- May cause irritation in those with known sensitivity to glycols
Science: A 200-subject repeat patch test study found no delayed hypersensitivity reactions to caprylyl glycol at typical use concentrations. However, isolated case reports of allergic contact dermatitis exist, suggesting it can act as an allergen in susceptible individuals. It is widely used in infant and sensitive-skin formulations as a preservative alternative.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Pentylene glycol is a lightweight humectant—a ingredient that draws water into the skin to improve hydration and texture. It's commonly used in serums, sunscreens, and moisturizers as a preservative booster and skin-conditioning agent.
Benefits
- Improves skin hydration by attracting moisture
- Lightweight feel, absorbs quickly without heaviness
- Helps preserve product stability and extends shelf life
Potential concerns
- Rare contact allergy reported in sensitive individuals
- Emerging evidence suggests it may be an uncommon cosmetic allergen—if you have sensitive or reactive skin, patch test first
Science: Safety studies show a high margin of safety at standard use levels (87–671 in adults), with minimal skin penetration due to the ingredient's volatility. However, recent dermatological reports flag pentylene glycol as an emerging contact allergen in some individuals, warranting attention for those with sensitive skin.
Analyze Ingredient Further→ -
Tocopherol is a form of vitamin E, a fat-soluble antioxidant that protects skin from damage caused by free radicals and oxidative stress. It helps maintain skin's natural barrier function and is commonly used in skincare products to prevent premature aging and support overall skin health.
Benefits
- Protects skin from free radical damage and oxidative stress
- Supports skin barrier function and moisture retention
- May help reduce signs of aging caused by UV exposure and environmental damage
- Works as a lipid antioxidant to prevent degradation of skin oils
Science: Tocopherol (α-tocopherol) is recognized in peer-reviewed research as a key endogenous defense mechanism against oxidative stress in aging skin, particularly from UV-induced damage. Studies confirm it functions as a lipid-soluble antioxidant capable of preventing lipid peroxidation, with established efficacy in cosmetic and therapeutic applications.
Analyze Ingredient Further→ -
Triethylhexanoin is a lightweight synthetic oil used in skincare products to soften and smooth the skin. It acts as an emollient and helps products glide on easily while creating a subtle protective layer on the skin's surface.
Benefits
- Smooths and softens skin texture
- Lightweight feel without heaviness
- Helps other ingredients spread evenly across skin
Science: Limited peer-reviewed data available for this ingredient. It is chemically similar to other well-established synthetic esters used in cosmetics and has a history of safe use in personal care formulations.
Analyze Ingredient Further→ -
Alumina is a fine powder form of aluminum oxide, a naturally occurring mineral. In skincare, it functions as a gentle abrasive, absorbent, and bulking agent that helps absorb excess oil and improve product texture.
Benefits
- Gently exfoliates dead skin cells
- Absorbs excess oil and sebum
- Improves product texture and feel
Science: The Cosmetic Ingredient Review Expert Panel concluded that alumina is safe as used in cosmetics at current concentrations. Occupational exposure studies show alumina dust in industrial settings has not been associated with significant lung damage or cancer, and the form used in cosmetics is essentially the same as that approved for medical devices.
Analyze Ingredient Further→ -
Caprylyl Methicone is a silicone-based conditioning agent that creates a smooth, lightweight film on the skin. It's used in skincare products to improve texture, reduce tackiness, and help other ingredients spread evenly across the skin.
Benefits
- Smooths skin texture
- Reduces greasy or sticky feel
- Improves product spreadability and absorption
Science: Limited peer-reviewed data available for this ingredient. It is a volatile silicone commonly used in cosmetics with a strong safety history and low skin penetration due to its molecular structure.
Analyze Ingredient Further→ -
Disteardimonium hectorite is a clay-derived mineral ingredient used as a thickener and absorbent in cosmetics. It helps create a smooth texture, absorb excess oil, and improve the spreadability of skincare and makeup products.
Benefits
- Absorbs excess oil and sebum
- Improves product texture and consistency
- Helps products spread evenly on skin
Potential concerns
- May cause allergic contact dermatitis in sensitive individuals
- Documented cases of positive patch test reactions when used in cosmetic formulations
Science: A 2020 case study in Contact Dermatitis documented allergic sensitization to disteardimonium hectorite when patch tested as part of a cosmetic formulation, though this appears to be a rare reaction. Limited peer-reviewed safety data exists for this ingredient in general use.
Analyze Ingredient Further→ -
This is a silicone-based thickening agent and texture modifier that combines dimethicone (a lightweight silicone) with PEG polymers to create a smooth, spreadable consistency in skincare products. It helps products glide onto skin easily and gives them a silky feel without leaving a greasy residue.
Benefits
- Creates a smooth, non-greasy texture that's easy to apply
- Helps products spread evenly across the skin
- Provides a silky finish and improved product feel
Potential concerns
- May cause buildup on skin if not properly cleansed, particularly for acne-prone individuals
- Some people prefer to avoid silicones due to concern about pore clogging, though evidence is limited
Science: Limited peer-reviewed data available for this specific ingredient. Dimethicone and PEG polymers are individually well-established as safe in cosmetics; this crosspolymer combines their properties for texture enhancement. Safety profiles of both components support low irritation risk for most skin types.
Analyze Ingredient Further→ -
Silica is a mineral powder derived from silicon dioxide that's commonly used in skincare and makeup products. It works primarily as a texture enhancer and absorbent, helping to mattify skin, improve product feel, and absorb excess oil.
Benefits
- Mattifies skin and reduces shine
- Improves product texture and spreadability
- Absorbs excess sebum and moisture
- Creates a smooth, refined appearance
Potential concerns
- When used as nanoparticles, potential for skin penetration remains under study
- Inhalation of silica powder (primarily occupational concern) has known health risks; topical use in cosmetics is considered lower risk
- Listed among potential carcinogenic substances in cosmetic formulations, though safe use levels and regulatory limits are established in the EU and US
Science: A 2023 review of European facial cosmetics identified silica among potential carcinogenic ingredients present in commercial products, though this reflects presence rather than proven harm at typical use concentrations. Research on silica nanoparticles suggests they are being developed for cosmetic use, but percutaneous penetration and long-term safety data remain limited. Regulatory agencies (EU, FDA) have established safe concentration limits for cosmetic use.
Analyze Ingredient Further→ -
Propylene glycol is a lightweight humectant and solvent commonly used in skincare formulations. It helps draw moisture into the skin and improves the texture and spreadability of products.
Benefits
- Hydrates skin by attracting and retaining moisture
- Enhances product texture and makes formulas easier to apply
- Helps active ingredients penetrate the skin more effectively
- Improves stability and shelf life of formulations
Potential concerns
- May cause contact dermatitis or irritation in sensitive individuals
- Can occasionally trigger allergic reactions in susceptible people
- High concentrations may feel sticky or heavy on some skin types
Science: Research confirms propylene glycol acts as a penetration enhancer in topical formulations, improving skin uptake of active ingredients. The ingredient is widely studied and considered safe at typical cosmetic concentrations, though individual sensitivity varies.
Analyze Ingredient Further→ -
Triethoxycaprylylsilane is a silicone-based coating agent used to modify the surface of pigments (like titanium dioxide and zinc oxide) in cosmetic formulations. It makes pigments more compatible with cosmetic formulas and can improve product texture and stability.
Benefits
- Improves pigment dispersion in formulations
- Enhances product stability and texture
- Reduces pigment clumping in finished products
Potential concerns
- Limited safety data available for direct skin exposure
- Inhalation toxicity concerns noted in occupational settings with nanoparticles
Science: Available research focuses on triethoxycaprylylsilane as a coating on zinc oxide and titanium dioxide nanoparticles in occupational inhalation studies, not topical skincare use. In cosmetic formulations, this ingredient functions as a surface modifier for pigments and is not typically absorbed through intact skin in meaningful amounts.
Analyze Ingredient Further→ -
Butyloctyl Salicylate is a conditioning agent derived from salicylic acid (the same compound used in acne treatments). In skincare products, it works as a skin and hair conditioning ingredient, helping to soften and smooth the skin's surface at typical use levels of 0.5–5%.
Benefits
- Conditions and softens skin
- Improves skin texture and smoothness
- Lightweight conditioning without heavy residue
Potential concerns
- May cause irritation or sensitization in formulations that are not properly balanced
- Some salicylates are absorbed through the skin; long-term effects of topical absorption are not extensively documented
Science: The Cosmetic Ingredient Review Expert Panel (2025) concluded that Butyloctyl Salicylate is safe in cosmetics at current use levels when formulated to be non-irritating and non-sensitizing. The ingredient has low acute toxicity via dermal exposure, though around 10% of applied salicylates may remain in the skin.
Analyze Ingredient Further→ -
Maltodextrin is a carbohydrate derived from starches like corn or potato. In skincare, it's used as a filler, thickener, and texture agent — it has no direct active benefit for skin itself.
Science: Maltodextrin is an inert, non-toxic carbohydrate commonly used as a placebo control in clinical nutrition studies, indicating excellent safety and tolerability. No adverse effects on skin health or systemic absorption concerns have been documented.
Analyze Ingredient Further→ -
Diethylhexyl Syringylidenemalonate is a synthetic antioxidant derived from plant-based compounds. It works by neutralizing free radicals and oxidative stress on the skin, helping to protect against environmental damage and support skin stability in formulations.
Benefits
- Antioxidant protection against free radicals
- Helps prevent product oxidation and degradation
- May support skin defense against environmental stressors
Science: Limited peer-reviewed data available for this ingredient. It is structurally related to known antioxidant compounds and is used in cosmetics at low concentrations, with no significant safety concerns reported in cosmetic safety databases.
Analyze Ingredient Further→ -
Propylene carbonate is a clear, odorless liquid that acts as a solvent in skincare formulations, helping to dissolve and deliver other active ingredients effectively into the skin. It's also used to improve the texture and consistency of products like ointments and serums.
Benefits
- Enhances penetration and delivery of active ingredients into the skin
- Helps maintain product stability and consistency
- Allows formulation of ingredients that would otherwise be difficult to dissolve
Potential concerns
- Generally recognized as safe for topical use, but may cause irritation in sensitive individuals at high concentrations
- Limited long-term safety data specific to skincare applications in everyday consumers
Science: Research shows propylene carbonate is effective as a solvent vehicle in topical formulations, successfully delivering active pharmaceutical ingredients like fluoride and paclitaxel through the skin with good tolerability after repeated application. However, most published data focuses on pharmaceutical rather than cosmetic skincare use.
Analyze Ingredient Further→ -
Magnesium sulfate is a mineral salt commonly used in skincare products as a bulking agent and texture builder. It's the same compound found in Epsom salts and has a long history of safe use in both cosmetics and medicine.
Benefits
- Adds texture and consistency to formulations
- Well-tolerated by most skin types
- Non-sensitizing based on extensive testing
Science: The Cosmetic Ingredient Review Expert Panel concluded magnesium sulfate is safe in cosmetics at concentrations up to 25% in rinse-off products and 11% in leave-on products. Clinical patch testing and toxicology studies showed no skin irritation or sensitization potential, with the ingredient's long medical history providing additional safety confidence.
Analyze Ingredient Further→ -
Polyhydroxystearic acid is a thickening and stabilizing agent derived from stearic acid (a fatty acid). It helps create texture, prevent separation of ingredients, and improve the feel of skincare products on the skin.
Benefits
- Improves product texture and spreadability
- Helps stabilize emulsions and prevent separation
- Provides mild emollient properties
Science: Limited peer-reviewed data available for this ingredient. It is chemically similar to stearic acid, which has a well-established safety record in cosmetics and is approved by major regulatory bodies including the FDA and EU.
Analyze Ingredient Further→ -
Isohexadecane is a lightweight synthetic oil used in skincare formulations to improve texture, spreadability, and how products feel on skin. It helps emulsions stay stable and gives products a smooth, non-greasy finish.
Benefits
- Creates a smooth, lightweight texture that spreads easily on skin
- Helps skincare products absorb without a heavy or greasy feel
- Improves product stability in emulsions
Science: Research shows isohexadecane is used in oil-in-water emulsions to enhance spreadability and skin feel. Studies confirm it functions effectively as an emollient ingredient, though it has slightly higher instability in nano-emulsion systems compared to linear-chain oils with similar carbon numbers.
Analyze Ingredient Further→ -
Dicaprylyl Carbonate is a lightweight, silky emollient and texture enhancer derived from coconut oil. It helps products feel smooth and non-greasy on skin while improving how easily the formula spreads and absorbs.
Benefits
- Creates a smooth, silky texture in formulas
- Provides light hydration without a heavy or oily feel
- Improves product spreadability and absorption
Science: Limited peer-reviewed data available for this ingredient. It is widely recognized as safe by cosmetic regulatory bodies (including the CosIng database) and has a long history of use in skincare and cosmetic formulations without notable safety concerns.
Analyze Ingredient Further→ -
Dicaprylyl Ether is a lightweight emollient derived from fatty acids that helps soften and smooth the skin. It works by creating a protective layer on the skin's surface, improving texture and moisture retention without leaving a greasy feel.
Benefits
- Softens and conditions skin
- Lightweight, non-greasy texture
- Improves skin smoothness
- Enhances product spreadability
Science: An Expert Panel for Cosmetic Ingredient Safety (Cosmetic Ingredient Review) assessed dicaprylyl ether as part of a group of fatty ethers used in cosmetics and concluded these ingredients are safe for use in cosmetic formulations at typical concentrations.
Analyze Ingredient Further→ -
Nylon-12 is a microplastic powder used in cosmetics as an absorbent and texture-enhancing agent. It helps products feel smooth, absorb excess oil, and improve spreadability on skin.
Benefits
- Absorbs excess sebum and oil
- Improves product texture and feel
- Provides a smooth, matte finish
Potential concerns
- Microplastic ingredient with potential environmental persistence
- May contribute to microplastic pollution in aquatic ecosystems when washed down the drain
- Electrostatic adhesion to skin could theoretically trap bacteria or disrupt skin microbiome (limited evidence in humans)
Science: Research shows nylon polymers are microplastics that can adhere to aquatic microorganisms and disrupt their function. While direct human skin safety data is limited, growing concern about microplastic accumulation in the environment and potential bioaccumulation warrants caution. Regulatory bodies in some regions are restricting microplastics in rinse-off cosmetics.
Analyze Ingredient Further→ -
Talc is a naturally occurring mineral powder used in cosmetics primarily as an absorbent and anti-caking agent. It helps reduce shine, absorb moisture, and improve the texture and spreadability of powdered products like foundations, blushes, and body powders.
Benefits
- Absorbs excess oil and moisture on skin
- Improves product texture and application
- Reduces shine and mattifies skin
Potential concerns
- Cosmetic talc has been associated with asbestos contamination in some cases; prolonged inhalation exposure may pose health risks, particularly for regular heavy users
- May cause respiratory irritation if inhaled as powder
- Talc particles can accumulate in lungs with chronic exposure
Science: Research indicates that cosmetic talc can contain asbestos contamination, and prolonged cumulative exposure has been linked to mesothelioma, particularly in individuals with heavy or prolonged use. A 2024 systematic review examined 77 epidemiological studies on talc and cancer risk across multiple exposure types and cancer sites, though methodological limitations exist in much of the literature. Modern cosmetic talc in regulated markets is typically talc-only without intentional asbestos, but historical contamination and inhalation exposure remain documented concerns.
Analyze Ingredient Further→ -
Benzoic acid is a naturally occurring preservative commonly used in skincare products to prevent bacterial and fungal growth, extending shelf life. It's a weak organic acid found in many plants and is also produced synthetically for cosmetic use.
Benefits
- Antimicrobial preservative that prevents bacterial and fungal contamination
- Helps extend product shelf life and maintain stability
- Naturally occurring compound also found in some foods
Potential concerns
- May cause skin irritation or sensitivity in some individuals, particularly on sensitive or compromised skin
- Can be a contact allergen for people with fragrance or preservative sensitivities
- Typical exposure is generally recognized as safe, but widespread use means cumulative exposure across multiple products
Science: Benzoic acid and its derivatives are widely used as preservatives in food, cosmetics, and pharmaceuticals with established safety profiles at typical concentrations. Limited peer-reviewed data specifically addressing dermal safety in skincare formulations; most safety data derives from food additive studies and general preservative toxicology rather than cosmetic-specific clinical trials.
Analyze Ingredient Further→ -
Undecane is a naturally occurring hydrocarbon compound found in plants. In skincare, it acts as a fragrance ingredient and preservative that may help calm irritated or inflamed skin by reducing allergic and inflammatory responses at the cellular level.
Benefits
- May help reduce skin inflammation and allergic reactions
- Potential support for sensitive or reactive skin conditions
- Fragrance and preservation properties
Science: Laboratory research shows undecane increases calming signals (cAMP) in skin cells and mast cells, reducing histamine release and inflammatory markers associated with conditions like atopic dermatitis. However, most evidence is from controlled lab studies; human clinical data in skincare products remains limited.
Analyze Ingredient Further→ -
Tridecane is a lightweight hydrocarbon (a type of oil derived from petroleum) sometimes used in cosmetic formulations as an emollient or texture modifier. It belongs to the alkane family of ingredients and helps create smooth, spreadable products.
Benefits
- Provides lightweight emollient properties
- Helps improve product spreadability and texture
- Non-polar solvent that can dissolve certain actives
Potential concerns
- Can penetrate skin barrier and increase transepidermal water loss (TEWL) when used at high concentrations
- May cause skin irritation, erythema (redness), and edema (swelling) with repeated or prolonged exposure
- Belongs to jet fuel component family—safety data in cosmetic-use concentrations is limited; most toxicology data comes from occupational exposure studies
Science: Research shows tridecane readily penetrates human skin in vitro. While studied as a jet fuel (JP-8) component, the irritation potential appears dose and exposure-duration dependent. Safety in typical low-concentration skincare products is not well-established in published literature; most concern data relates to occupational or high-level exposures.
Analyze Ingredient Further→ -
Styrene/Acrylates Copolymer is a synthetic polymer used as a film-forming and binding agent in skincare products. It creates a lightweight, flexible layer on the skin's surface that helps products adhere better and can provide a subtle smoothing or mattifying effect.
Benefits
- Improves product texture and wear
- Provides light film-forming properties for a smooth finish
- Helps bind other ingredients together
Potential concerns
- Potential for buildup with repeated layering
- May feel occlusive on sensitive or acne-prone skin if overused
Science: Limited peer-reviewed data available for this ingredient. Styrene/Acrylates Copolymers are widely used in cosmetics and generally recognized as safe by regulatory bodies, though individual sensitivities can vary.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients