Ingredients
-
Analysis not yet available for this ingredient.
-
Butylene glycol is a humectant—a type of ingredient that draws water into the skin and helps it stay hydrated. It's a small, lightweight molecule commonly used in moisturizers to improve hydration without leaving a heavy feel on the skin.
Benefits
- Increases skin hydration and moisture retention
- Lightweight and absorbs quickly
- Helps other active ingredients penetrate the skin more effectively
Science: Research demonstrates that butylene glycol, when combined with other humectants (like glycerin and hyaluronic acid) and occlusive ingredients in moisturizers, significantly improves skin hydration in both healthy skin and compromised skin conditions such as atopic dermatitis. It is recognized as a safe, effective humectant in dermatological formulations.
Analyze Ingredient Further→ -
Sodium hyaluronate is the salt form of hyaluronic acid, a naturally occurring substance found in your skin that acts like a moisture magnet. In skincare products, it absorbs water from the environment and binds it to your skin, helping to hydrate and plump the skin's surface.
Benefits
- Delivers intense hydration to the skin
- Helps reduce the appearance of fine lines by improving skin moisture
- Supports skin barrier function
- Suitable for all skin types, including sensitive and oily skin
Potential concerns
- In very dry climates with low humidity, it may draw moisture from deeper skin layers if not sealed with an occlusive product
- Rare allergic reactions are possible but extremely uncommon
Science: While the provided research focuses on intra-articular injections for joint health (showing good safety and efficacy), hyaluronic acid and its salt form are well-established in dermatology for topical hydration. The molecule's safety profile is well-documented across decades of use in medical and cosmetic applications, with severe adverse reactions being extremely rare.
Analyze Ingredient Further→ -
Phenoxyethanol is a preservative that prevents bacteria, yeast, and mold from growing in skincare products, helping them stay fresh and safe to use. It has been used safely in cosmetics for decades and is effective at very low concentrations.
Benefits
- Prevents microbial contamination and product spoilage
- Broad-spectrum antimicrobial activity against bacteria and yeast
- Minimal impact on beneficial skin bacteria when used at approved levels
Potential concerns
- Rare allergic contact dermatitis in sensitive individuals
- May cause irritation if used in products at concentrations above 1%
Science: The European Scientific Committee on Consumer Safety considers phenoxyethanol safe for all consumers, including children, at concentrations up to 1%. Adverse effects observed in animal studies required exposure levels approximately 200 times higher than those in cosmetic products, and it is classified as one of the most well-tolerated preservatives in cosmetics.
Analyze Ingredient Further→ -
Diisostearyl Malate is an emollient and texture-enhancing ingredient derived from malic acid and isostearyl alcohol. It's used in cosmetics to create a smooth, silky feel and improve product spreadability on skin.
Benefits
- Creates a smooth, silky texture in formulations
- Helps improve product spreadability and application
- Provides emollient properties for skin conditioning
Potential concerns
- Potential for contact dermatitis in sensitive individuals, particularly linked to trace impurities (isostearyl alcohol) rather than the ingredient itself
- May cause lip irritation in lip care products in susceptible people
Science: A 1987 case study documented contact dermatitis from this ingredient in lipstick, though the reaction was traced to specific impurities (isostearyl alcohol) present in the material rather than the pure ingredient itself. Limited additional peer-reviewed safety data is available for this ingredient.
Analyze Ingredient Further→ -
Trisodium Ethylenediamine Disuccinate is a chelating agent, which means it binds to trace metals in cosmetic formulas to keep products stable and prevent discoloration or degradation. It's used in small amounts primarily to maintain product quality rather than directly benefit your skin.
Benefits
- Extends product shelf life
- Prevents oxidation and discoloration
- Improves formula stability
Science: Limited peer-reviewed data available for this ingredient. It is approved for cosmetic use under EU and US regulations as a chelating agent and is considered safe at the low concentrations used in skincare formulations.
Analyze Ingredient Further→ -
Pentylene glycol is a lightweight humectant—a ingredient that draws water into the skin to improve hydration and texture. It's commonly used in serums, sunscreens, and moisturizers as a preservative booster and skin-conditioning agent.
Benefits
- Improves skin hydration by attracting moisture
- Lightweight feel, absorbs quickly without heaviness
- Helps preserve product stability and extends shelf life
Potential concerns
- Rare contact allergy reported in sensitive individuals
- Emerging evidence suggests it may be an uncommon cosmetic allergen—if you have sensitive or reactive skin, patch test first
Science: Safety studies show a high margin of safety at standard use levels (87–671 in adults), with minimal skin penetration due to the ingredient's volatility. However, recent dermatological reports flag pentylene glycol as an emerging contact allergen in some individuals, warranting attention for those with sensitive skin.
Analyze Ingredient Further→ -
Hydrolyzed hyaluronic acid is a smaller, broken-down form of hyaluronic acid—a naturally occurring substance that holds moisture in skin. The smaller molecular size allows it to penetrate the outer layers of skin more easily than regular hyaluronic acid, potentially delivering hydration deeper into the skin.
Benefits
- Enhanced skin hydration due to smaller molecular size and better penetration
- Helps plump and soften the appearance of fine lines
- Lightweight and suitable for layering with other skincare products
Science: Hydrolyzed hyaluronic acid is well-established in skincare for its hygroscopic properties (ability to attract and retain water). The cited research focuses on its use in advanced delivery systems like microneedles for pharmaceuticals and cosmetics, demonstrating its compatibility with sophisticated formulation technologies, though direct efficacy studies on topical application are limited in the provided literature.
Analyze Ingredient Further→ -
Sodium Hyaluronate Crosspolymer is a modified form of hyaluronic acid, a naturally occurring substance that holds moisture in skin. The crosslinked version is designed to stay on the skin's surface longer and provide sustained hydration, rather than absorbing deeply like standard hyaluronic acid.
Benefits
- Provides long-lasting hydration and moisture retention
- Creates a smoother skin feel and texture
- Helps plump fine lines temporarily through moisture
Science: Limited peer-reviewed data available for this specific crosslinked variant. Standard sodium hyaluronate has an extensive safety record as a humectant in skincare, and crosslinking is a common cosmetic chemistry technique to alter performance characteristics.
Analyze Ingredient Further→ -
Ethylhexylglycerin is a preservative and antimicrobial ingredient used to prevent bacterial growth and extend shelf life in skincare products. It's a multifunctional ingredient that helps keep formulations stable and free from contamination.
Benefits
- Prevents bacterial contamination in products
- Helps extend product shelf life
- Works synergistically with other preservatives for enhanced protection
Potential concerns
- May not be effective against all bacterial species (notably some Pseudomonas aeruginosa strains)
- Preservative-related sensitization possible in sensitive individuals, though uncommon
Science: Research shows ethylhexylglycerin has broad antimicrobial activity against many common cosmetic contaminants, though effectiveness varies by bacterial species. Studies demonstrate it can work synergistically with other preservative components to enhance biofilm inhibition.
Analyze Ingredient Further→ -
Titanium dioxide is a naturally occurring mineral that works as a physical UV filter and opacifying agent in skincare products. It sits on the skin's surface and reflects and scatters UV rays to provide broad-spectrum sun protection, and is also commonly used in foundations and powders to create coverage and a matte finish.
Benefits
- Provides broad-spectrum UVA and UVB protection
- Physical (non-chemical) sun filter suitable for sensitive skin
- Helps create opaque, matte finishes in makeup and tinted products
Potential concerns
- May leave a white cast on darker skin tones due to its opacity
- Can feel slightly heavy or occlusive on very oily skin types
- Rarely, inhalation of airborne powder particles may be a concern in occupational settings, though not in typical consumer use
Science: Titanium dioxide has a long history of safe use in cosmetics and is approved by the FDA, EU, and other major regulatory bodies as a sunscreen active ingredient. It is considered non-toxic and non-penetrating when applied topically in skincare products.
Analyze Ingredient Further→ -
Silica is a mineral powder derived from silicon dioxide that's commonly used in skincare and makeup products. It works primarily as a texture enhancer and absorbent, helping to mattify skin, improve product feel, and absorb excess oil.
Benefits
- Mattifies skin and reduces shine
- Improves product texture and spreadability
- Absorbs excess sebum and moisture
- Creates a smooth, refined appearance
Potential concerns
- When used as nanoparticles, potential for skin penetration remains under study
- Inhalation of silica powder (primarily occupational concern) has known health risks; topical use in cosmetics is considered lower risk
- Listed among potential carcinogenic substances in cosmetic formulations, though safe use levels and regulatory limits are established in the EU and US
Science: A 2023 review of European facial cosmetics identified silica among potential carcinogenic ingredients present in commercial products, though this reflects presence rather than proven harm at typical use concentrations. Research on silica nanoparticles suggests they are being developed for cosmetic use, but percutaneous penetration and long-term safety data remain limited. Regulatory agencies (EU, FDA) have established safe concentration limits for cosmetic use.
Analyze Ingredient Further→ -
Polysorbate 60 is an emulsifier and solubilizer derived from sorbitan and polyethylene glycol. It helps blend water and oil-based ingredients together in formulations and can assist in delivering active ingredients into the skin.
Benefits
- Helps stabilize product texture by mixing incompatible ingredients
- May improve skin penetration of certain active ingredients
- Enables creation of lightweight, uniform formulations
Science: Research shows polysorbate 60 functions effectively as a surfactant in nanoparticle delivery systems, enhancing skin penetration of topical actives. It has been used safely in pharmaceutical formulations with established stability profiles and minimal irritation potential at typical cosmetic concentrations.
Analyze Ingredient Further→ -
2-Hexanediol is a humectant and preservative booster commonly used in skincare products to help retain moisture and extend shelf life. It works by drawing water into the skin while also enhancing the effectiveness of other preservatives, allowing brands to use lower amounts of traditional preservatives.
Benefits
- Hydrates and moisturizes skin by drawing in water
- Helps preserve products with lower preservative levels
- Works synergistically with other skincare ingredients like niacinamide
Potential concerns
- May cause cell viability concerns at concentrations above 1.0% in laboratory studies
- Limited real-world safety data in humans at typical skincare concentrations (usually 2-5%)
- Potential environmental concern if released into water systems
Science: While 2-hexanediol is widely used as a preservative substitute for parabens, recent cytotoxicity studies raise questions about safety at concentrations commonly found in skincare products (>2%). However, these findings are from laboratory cell studies and may not directly translate to human skin application. Further human safety studies are needed to confirm real-world risk.
Analyze Ingredient Further→ -
Acrylates Copolymer is a synthetic polymer that acts as a film-former in skincare products, creating a thin, flexible layer on the skin's surface. It helps products adhere better and can improve the wear-time and finish of formulations.
Benefits
- Creates a smooth, adherent film on skin
- Improves product longevity and wear-time
- Enhances texture and finish of skincare formulations
Potential concerns
- May feel occlusive or slightly sticky on some skin types
- Potential for buildup with repeated layering
- Can cause irritation in individuals with very sensitive skin or acrylic sensitivities
Science: Limited peer-reviewed data available specifically for Acrylates Copolymer as used in skincare. Related polymer safety assessments by the Cosmetic Ingredient Review panel have generally found similar synthetic polymers safe at typical use concentrations, though individual polymer variants may have varying safety profiles.
Analyze Ingredient Further→ -
Behenyl alcohol is a waxy, plant-derived fatty alcohol that acts as a thickener and emollient in skincare products. It helps create stable, creamy textures in formulations and can improve the feel and moisturizing properties of creams and lotions.
Benefits
- Thickens and stabilizes product texture
- Provides emollient properties for skin conditioning
- Helps reduce moisture loss from skin
- Creates a smooth, non-greasy feel in formulations
Science: Research from L'Oréal shows behenyl alcohol works effectively as a structure-building agent in oil-based skincare systems, particularly when combined with behenic acid. It forms stable crystalline networks in oils that enhance product stability and texture without irritation concerns.
Analyze Ingredient Further→ -
Linalool is a naturally occurring fragrant compound found in lavender and other plants, commonly used in skincare products for its pleasant scent. It's a volatile component of essential oils and plant extracts that contributes to the aromatic profile of formulations.
Benefits
- Provides natural fragrance to skincare products
- Derived from plants traditionally associated with calming and relaxation properties
- Part of essential oil blends used in aromatherapy applications
Potential concerns
- May cause skin irritation or allergic contact dermatitis in sensitive individuals
- Can oxidize when exposed to air, potentially creating irritant byproducts
- Lavender extracts containing linalool have estrogenic and antiandrogenic properties — topical application near the breast should be avoided
Science: Lavender, which contains linalool as a major compound, is recognized as generally safe (GRAS) by the FDA. However, limited peer-reviewed safety data exists specifically for linalool in topical skincare formulations, and individual sensitivity varies. Caution is warranted for prolonged or concentrated use, particularly in sensitive populations.
Analyze Ingredient Further→ -
Iron Oxides (CI 77491) is a naturally occurring mineral pigment used primarily as a colorant in cosmetics, particularly in foundations, powders, and tinted skincare products. It provides red and brown tones to makeup and doesn't serve a therapeutic skincare function—it's there to color the product.
Benefits
- Provides stable, long-lasting color
- Mineral-based alternative to synthetic dyes
- Generally well-tolerated by sensitive skin
Science: Iron Oxides are approved colorants in cosmetics by major regulatory bodies (FDA, EU) and have a long history of safe use. Limited peer-reviewed data exists specifically on topical iron oxide safety, but extensive regulatory review and decades of cosmetic use support its safety profile in this application.
Analyze Ingredient Further→ -
Iron Oxides (CI 77492) is a naturally derived colorant that gives products a yellow or earth-tone pigment. It's commonly used in foundations, powders, and tinted skincare products to create color and is considered a mineral pigment safe for use on skin.
Benefits
- Provides natural, stable color to skincare and makeup products
- Mineral-based alternative to synthetic dyes
- Generally well-tolerated by most skin types including sensitive skin
Science: Iron Oxides are approved colorants by regulatory bodies including the FDA and EU cosmetics regulations. Limited peer-reviewed data available specifically for this ingredient, but it has a long history of safe use in cosmetics with minimal reports of adverse reactions.
Analyze Ingredient Further→ -
Iron Oxides (CI 77499) is a black pigment derived from iron compounds, commonly used in cosmetics to add color and provide a matte finish. It's a mineral-based colorant that sits on the skin's surface without penetrating deeply, making it a popular choice in foundations, powders, and eyeshadows.
Benefits
- Provides natural black pigmentation for even color coverage
- Creates a matte or natural finish without shine
- Mineral-based alternative to synthetic dyes
Potential concerns
- May cause irritation in people with sensitive skin or iron sensitivities (rare)
- Can potentially clog pores if used in heavy concentrations in acne-prone individuals
- Risk of staining if the product formula is unstable or applied heavily
Science: Iron Oxides are FDA-approved colorants for cosmetic use and have a long history of safe use in skincare and makeup products. Limited peer-reviewed data available specifically for this ingredient, though regulatory bodies have established it as safe for cosmetic applications at typical use levels.
Analyze Ingredient Further→ -
Alcohol Denat is denatured ethanol (regular alcohol) that has been made undrinkable by adding bitter-tasting substances. It's used in skincare products as a solvent and preservative to help dissolve other ingredients and extend shelf life.
Benefits
- Helps dissolve and blend skincare ingredients together
- Provides preservative function to prevent microbial growth
- Gives products a lightweight, fast-absorbing texture
Potential concerns
- Can be drying or irritating to sensitive skin with repeated use
- May cause stinging if applied to broken skin or open wounds
- High concentrations may trigger irritation in those with sensitive or reactive skin
Science: The Cosmetic Ingredient Review Expert Panel concluded that Alcohol Denat and its various forms are safe as used in cosmetics. Denaturants added to prevent accidental ingestion (such as Denatonium Benzoate) show low systemic absorption and minimal irritation at typical skincare concentrations.
Analyze Ingredient Further→ -
Mango seed butter is a rich, creamy oil extracted from mango pit kernels. In skincare, it acts as an emollient and moisturizer, helping to soften and hydrate skin while forming a protective barrier on the skin's surface.
Benefits
- Deep moisturizing and skin softening
- Rich in fatty acids and antioxidants
- Helps improve skin texture and suppleness
Science: Limited peer-reviewed data available for this ingredient. Mango seed butter is traditionally used in skincare and cosmetics; safety is supported primarily by its long history of use and the well-documented safety profile of mango seed oil components rather than dedicated clinical studies.
Analyze Ingredient Further→ -
Octyldodecanol is a lightweight emollient oil derived from fatty alcohols that mimics the skin's natural oils. It's used in skincare products to soften and smooth the skin while helping other ingredients penetrate effectively.
Benefits
- Softens and conditions skin
- Helps other active ingredients absorb better into skin
- Creates a smooth, non-greasy feel
- Stabilizes product formulations
Science: Research shows octyldodecanol is highly lipophilic (oil-loving) and can enhance the skin's absorption of other cosmetic ingredients. It is well-tolerated and has been safely used in cosmetic formulations for decades with no notable adverse effects reported in peer-reviewed literature.
Analyze Ingredient Further→ -
Polyglyceryl-2 Diisostearate is an emulsifier and thickening agent derived from glycerin and fatty acids. It helps blend water and oil-based ingredients together in skincare formulas, creating a smooth, stable texture while improving how the product feels on skin.
Benefits
- Helps stabilize product texture
- Improves how smoothly the product applies
- Allows formulas to blend water and oils effectively
Science: Limited peer-reviewed data available for this ingredient. It is structurally similar to other polyglyceryl esters widely used in cosmetics with established safety profiles and low irritation potential.
Analyze Ingredient Further→ -
Hydrolyzed Sodium Hyaluronate is a smaller, broken-down form of hyaluronic acid that penetrates skin more easily than its larger counterpart. It works as a humectant, drawing moisture from the environment into your skin to keep it hydrated and plump.
Benefits
- Deep hydration and moisture retention
- Improved skin plumpness and elasticity
- Lightweight texture that absorbs quickly
Science: Hyaluronic acid and its derivatives are well-established humectants with extensive safety data and a long history of use in cosmetics. Limited peer-reviewed data available specifically for the hydrolyzed sodium form, but it follows the same safety profile as other hyaluronic acid derivatives.
Analyze Ingredient Further→ -
Glyceryl stearate is a natural emulsifier and thickener derived from vegetable oils and glycerin. It helps bind water and oil together in skincare formulas, creating a smooth texture while providing mild moisturizing properties.
Benefits
- Helps create stable, smooth product textures
- Mild emollient that softens skin
- Derived from natural sources (vegetable-based)
Science: The Cosmetic Ingredient Review Expert Panel confirmed in 2023 that glyceryl stearate and related glyceryl diesters are safe for cosmetic use at standard concentrations. Research indicates the ingredient has a skin-safe pH profile and demonstrates good stability in formulations.
Analyze Ingredient Further→ -
Yellow 6 is a synthetic colorant approved for use in cosmetics that gives products a yellow or golden hue. It serves purely an aesthetic purpose and has no active skincare benefits—it's added solely to make products visually appealing.
Potential concerns
- May cause allergic reactions or sensitivity in people with dye sensitivities
- Potential contact dermatitis in sensitive individuals
- Azo dye—some people prefer to avoid synthetic colorants on principle
Science: Yellow 6 (Tartrazine) is approved by regulatory bodies including the FDA and EU for cosmetic use at specified concentrations. Limited peer-reviewed dermatological data exists, but documented cases of colorant-related contact sensitization are rare in cosmetics. It is generally considered safe for topical use in the concentrations used in skincare products.
Analyze Ingredient Further→ -
Red 33 is a synthetic colorant (also called Amaranth) used to give skincare products a red or pink tint. It serves no active skincare benefit and is purely for aesthetic appeal—it colors the product so it looks attractive to consumers.
Potential concerns
- May cause allergic reactions or sensitivity in people with dye sensitivities
- Can stain skin or clothing if product is heavily pigmented
- Restricted or banned in some countries (including the US for food, though allowed in cosmetics in some regions)
Science: Limited peer-reviewed data available for this ingredient. Red 33 is a well-established synthetic dye with a long history of use in cosmetics; regulatory bodies like the EU have approved it for color purposes, though its safety status varies by region and application.
Analyze Ingredient Further→ -
Blue 1 (also called Brilliant Blue) is a synthetic colorant used to give skincare products a blue tint or hue. It serves no active skincare benefit and is purely for visual appeal and product identification.
Potential concerns
- May cause contact dermatitis or allergic reactions in sensitive individuals
- Not recommended for those with dye sensitivities or certain food/cosmetic allergies
Science: Blue 1 is approved by the FDA and EU for cosmetic use and has a long safety history as a food and cosmetic colorant. Limited peer-reviewed data specific to skincare applications, but regulatory bodies consider it safe at approved concentrations for topical use.
Analyze Ingredient Further→ -
Polysorbate 80 is an emulsifier that helps mix oil and water-based ingredients together in skincare products. It's a synthetic compound derived from sorbitol (a sugar alcohol) and is widely used in cosmetics, pharmaceuticals, and food products to create stable, smooth textures.
Benefits
- Enables smooth blending of oil and water ingredients
- Improves product texture and spreadability
- Helps stabilize formulations
Potential concerns
- Rare but documented risk of allergic reactions or hypersensitivity in susceptible individuals, particularly those with sensitivities to polyethylene glycol (PEG) compounds
- May cause contact dermatitis or irritation in people with sensitive skin
Science: Research indicates polysorbate 80 can trigger immediate hypersensitivity reactions in some individuals, with cross-reactivity possible with related compounds like polyethylene glycols. However, such reactions are uncommon in topical skincare applications compared to intravenous pharmaceutical use. The ingredient has a long history of safe use in cosmetics when applied to skin at typical concentrations.
Analyze Ingredient Further→ -
Sodium acetylated hyaluronate is a modified form of hyaluronic acid, a naturally occurring compound that holds moisture in skin. This version is chemically altered to help protect your skin's structural proteins (collagen) from breaking down, potentially reducing the appearance of wrinkles over time.
Benefits
- May reduce the appearance of fine lines and wrinkles with regular use (2+ months)
- Provides immediate smoothing effect on skin texture within 6 hours of application
- Helps protect collagen from degradation caused by aging and environmental damage
- Supports skin hydration through moisture-binding properties
Science: A 2022 peer-reviewed study demonstrated that sodium acetylated hyaluronate inhibits matrix metalloproteinases (MMPs)—enzymes that break down collagen—in both young and aged skin exposed to UV and pollution. Clinical trials showed measurable reduction in wrinkle depth and number after 2 months of use, with visible smoothing effects visible within 6 hours.
Analyze Ingredient Further→ -
Isohexadecane is a lightweight synthetic oil used in skincare formulations to improve texture, spreadability, and how products feel on skin. It helps emulsions stay stable and gives products a smooth, non-greasy finish.
Benefits
- Creates a smooth, lightweight texture that spreads easily on skin
- Helps skincare products absorb without a heavy or greasy feel
- Improves product stability in emulsions
Science: Research shows isohexadecane is used in oil-in-water emulsions to enhance spreadability and skin feel. Studies confirm it functions effectively as an emollient ingredient, though it has slightly higher instability in nano-emulsion systems compared to linear-chain oils with similar carbon numbers.
Analyze Ingredient Further→ -
Sorbitan Stearate is a gentle emulsifier derived from sorbitol (a natural sugar alcohol) and stearic acid (a fatty acid). It helps blend water and oil-based ingredients together in skincare products, creating a smooth, stable texture.
Benefits
- Helps create smooth, well-blended formulations
- Mild on skin with minimal irritation potential
- Non-sensitizing for most users
Potential concerns
- May cause mild skin irritation in sensitive individuals
- Rare allergic reactions reported in fewer than 1% of people with contact dermatitis
Science: The Cosmetic Ingredient Review Expert Panel concluded Sorbitan Stearate is safe for cosmetic use. Clinical and animal studies showed it is generally a minimal to mild skin irritant and non-sensitizing, with no mutagenic or reproductive toxicity concerns at typical use levels (usually under 10%).
Analyze Ingredient Further→ -
Hyaluronic acid is a naturally occurring molecule found in your skin that acts like a sponge, holding water to keep skin hydrated and plump. In skincare products, it helps improve skin moisture, reduce the appearance of fine lines, and support overall skin texture and firmness.
Benefits
- Boosts skin hydration and moisture retention
- Helps reduce the appearance of fine lines and wrinkles
- Supports skin firmness and elasticity
- Well-tolerated and safe for most skin types
- May enhance effects of other anti-aging treatments
Science: Multiple clinical studies confirm hyaluronic acid is highly effective and well-tolerated for improving skin hydration and signs of aging. Research shows it works as an effective standalone treatment and also enhances results when combined with other anti-aging procedures, with benefits sustained over extended use periods.
Analyze Ingredient Further→ -
Potassium hyaluronate is the potassium salt form of hyaluronic acid, a naturally occurring substance found in skin and connective tissue. In skincare, it works as a humectant—drawing moisture from the air and deeper skin layers to the surface—helping skin feel plump and hydrated.
Benefits
- Increases skin hydration and moisture retention
- Helps skin appear smoother and more plump
- Lightweight and suitable for most skin types, including oily and sensitive skin
Science: A 2009 Cosmetic Ingredient Review safety assessment concluded that potassium hyaluronate is safe for use in cosmetics at concentrations up to 2%, with no evidence of toxicity, allergenicity, or reproductive harm across multiple animal and clinical studies. Widespread clinical use, particularly via injection, has shown a strong safety profile with minimal adverse reactions.
Analyze Ingredient Further→ -
This is a modified form of hyaluronic acid, a naturally occurring substance that holds water in the skin. The modification (adding a hydroxypropyltrimonium coating) makes it positively charged, allowing it to bind more effectively to skin and hair. It works as a humectant, drawing moisture into the skin for a hydrating effect.
Benefits
- Hydrates and plumps skin by attracting and holding water
- May provide longer-lasting hydration compared to unmodified hyaluronic acid
- Helps improve skin texture and smoothness
Science: Limited peer-reviewed data available for this specific ingredient. However, it is derived from hyaluronic acid, which has extensive safety and efficacy data in cosmetics, and the chemical modification is designed to improve performance rather than create safety concerns.
Analyze Ingredient Further→ -
PEG-100 Stearate is an emulsifier—a ingredient that helps blend oil and water together in skincare creams and lotions. It's used to create smooth, stable textures and can help improve how well products spread on skin.
Benefits
- Helps create smooth, gel-like cream textures
- Improves physical stability of formulations
- May support skin barrier function when used in basic moisturizing formulas
Science: Research shows that formulations containing PEG-100 Stearate alongside other emulsifiers can improve skin barrier function and reduce trans-epidermal water loss, suggesting it may be suitable for compromised or sensitive skin in moisturizing products.
Analyze Ingredient Further→ -
Benzyl alcohol is a preservative and solvent commonly used in skincare products to prevent bacterial and fungal growth, extending shelf life. It also helps dissolve and mix other ingredients together in formulations.
Benefits
- Preserves product freshness and prevents microbial contamination
- Helps stabilize and blend formula ingredients
- Generally recognized as safe for topical use in cosmetics at approved concentrations
Potential concerns
- Can cause skin irritation or allergic contact dermatitis in sensitive individuals
- May cause stinging or dryness on broken or compromised skin
- High systemic absorption in infants and neonates is a known concern; products containing benzyl alcohol should be kept away from babies and nursing mothers should avoid application to breast tissue
Science: Benzyl alcohol is widely used in pharmaceutical and cosmetic formulations as a preservative. Research indicates it has low systemic absorption through intact adult skin at typical cosmetic concentrations, but neonatal toxicity is a documented concern at high doses, warranting caution in products used near infants or during breastfeeding.
Analyze Ingredient Further→ -
Dimethylsilanol Hyaluronate is a hybrid ingredient that combines hyaluronic acid (a powerful skin hydrator) with silicone technology. It's designed to deliver long-lasting moisture while creating a smooth, silky feel on the skin.
Benefits
- Intense hydration and moisture retention
- Smooth, soft skin texture
- May improve skin plumpness and reduce fine line appearance
Science: Limited peer-reviewed data available for this specific ingredient. The component hyaluronic acid has extensive research supporting its hydrating benefits; silanol compounds are generally recognized as safe in cosmetics, but specific safety and efficacy data for this combined ingredient is not well-documented in published literature.
Analyze Ingredient Further→ -
This is a hybrid ingredient combining sodium hyaluronate (a moisture-binding compound) with dimethylsilanol (a silicone derivative). It's designed to hydrate skin while providing a smooth, silky feel and potentially improving how the product spreads and absorbs.
Benefits
- Hydration and moisture retention
- Smooth, silky skin texture
- Enhanced product spreadability
Science: Limited peer-reviewed data available for this specific ingredient combination. Sodium hyaluronate is well-established as safe and hydrating; dimethylsilanol is a common silicone component with a good safety profile, but the combined ingredient lacks independent clinical validation.
Analyze Ingredient Further→ -
Fragrance is a blend of aromatic compounds added to skincare products to create a pleasant scent. It serves no therapeutic benefit to your skin and is purely for sensory appeal.
Benefits
- Improves user experience through pleasant scent
- Can enhance the perception of product quality
Potential concerns
- May cause irritation or allergic reactions, especially in sensitive skin
- Can trigger contact dermatitis or sensitization with repeated exposure
- Fragrance is a common allergen and a leading cause of cosmetic-related skin reactions
Science: Fragrance is a known contact allergen and irritant for a subset of the population. Those with sensitive skin, eczema, or fragrance sensitivity should avoid fragranced products. The specific allergens vary depending on which aromatic compounds are used in the fragrance blend.
Analyze Ingredient Further→ -
Polyglyceryl-2 Triisostearate is an emulsifier derived from glycerin and stearic acid that helps blend oil and water-based ingredients together in skincare formulas. It creates a stable, smooth texture and is commonly used in creams, lotions, and serums to improve consistency and spreadability.
Benefits
- Helps stabilize oil and water mixtures for better product texture
- Improves how the product spreads and absorbs on skin
- Gentle, plant-derived alternative to synthetic emulsifiers
Science: Limited peer-reviewed data available for this specific ingredient. As a polyglyceryl ester emulsifier, it is generally recognized as safe by cosmetic regulatory bodies and is considered mild and well-tolerated in skincare formulations.
Analyze Ingredient Further→ -
This is a synthetic polymer (plastic-like material) used as a thickener and film-former in skincare products. It absorbs water to create a gel-like texture and helps products spread smoothly while forming a lightweight protective layer on skin.
Benefits
- Creates smooth, spreadable texture
- Provides light film-forming properties for product adherence
- Helps stabilize product formulations
Science: Limited peer-reviewed data available for this ingredient. It is approved for cosmetic use in major regulatory systems (EU, FDA) and is considered a low-hazard synthetic polymer with minimal skin penetration due to its large molecular size.
Analyze Ingredient Further→ -
Sorbitan Oleate is an emulsifier derived from sorbitol (a natural sugar alcohol) and oleic acid (a fatty acid). It helps mix oil and water-based ingredients together in skincare formulations, creating a smooth, stable texture.
Benefits
- Stabilizes oil-and-water mixtures in creams and lotions
- Improves product texture and spreadability
- Allows better absorption of other skincare actives
Potential concerns
- Mild skin irritant in some individuals; generally minimal irritation in testing
- Rare allergic contact reactions reported (<1% in sensitive populations)
- May reduce skin's DNA repair capacity when exposed to UV radiation (in lab studies)
Science: The Cosmetic Ingredient Review Expert Panel concluded Sorbitan Oleate is safe for cosmetic use at concentrations typically below 10%. While generally well-tolerated with minimal irritation in clinical tests, one in vitro study noted it may interfere with UV-induced DNA repair in human cells—a concern primarily relevant when combined with sun exposure rather than the ingredient alone.
Analyze Ingredient Further→ -
Red 7 Lake (CI 15850) is a synthetic colorant approved for cosmetic use that adds red or pink color to skincare products. It's a 'lake' form, meaning the dye is bound to an insoluble substrate, making it more stable in formulations. It serves purely aesthetic purposes and has no active skincare benefits.
Potential concerns
- May cause allergic reactions or contact sensitivity in individuals with dye sensitivities
- Can stain skin or fabrics temporarily
Science: Red 7 Lake is approved by regulatory bodies including the FDA and EU for cosmetic use with established safety limits. Limited peer-reviewed data is available on this specific colorant in skincare applications; safety relies primarily on regulatory approval and historical use data.
Analyze Ingredient Further→ -
Flavor is a fragrant compound or blend designed to add pleasant scent and taste sensations to skincare products. It serves primarily as a sensory enhancer rather than a functional skincare ingredient, though some flavoring agents (particularly essential oils) may have antimicrobial properties.
Benefits
- Improves sensory experience and product appeal
- Some flavor compounds derived from essential oils may have antimicrobial properties
- Can mask unpleasant odors from other skincare ingredients
Potential concerns
- Potential allergic reactions or sensitivities, especially in products applied near the mouth or eyes
- Essential oil-based flavors may cause irritation in sensitive or reactive skin
- Risk of ingestion if used in lip products; safety depends on specific flavor compounds used
- May not be necessary for skincare efficacy
Science: Flavor compounds in cosmetics are often produced through microbial fermentation or derived from essential oils, which research shows can exhibit antimicrobial activity. However, peer-reviewed safety data specifically evaluating flavor ingredients in topical skincare products is limited, and their inclusion is primarily for consumer preference rather than therapeutic benefit.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Ethylcellulose is a thickening and film-forming agent derived from cellulose that helps create a protective barrier on the skin and gives products a smooth texture. It's commonly used in creams and lotions to improve consistency and help active ingredients adhere to the skin.
Benefits
- Creates a protective film on skin surface
- Improves product texture and spreadability
- Helps stabilize emulsions and creams
- Can be used as a carrier for active ingredients like vitamins and botanicals
Science: Research shows ethylcellulose is an effective pharmaceutical and cosmetic excipient used to encapsulate and deliver active ingredients (including sensitive compounds like paclitaxel and curcumin) without interfering with their efficacy. It has been safely used in topical formulations to support wound healing and skin regeneration properties of other active ingredients.
Analyze Ingredient Further→ -
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
-
Analysis not yet available for this ingredient.
Edit this product
Edit Ingredients